Instruction Manual

34
VQT0Z62
∫ Q&A for the panel display
Question (Q) Answer (A)
[ISO] and [F] are flashing or
the numbers for the ISO
sensitivity and aperture are
flashing.
This means that the ISO sensitivity and aperture of the digital camera
are outside the flash working range of the flash.
Change the ISO sensitivity and aperture of the digital camera.
The optimum camera to
subject distance is flashing.
The flash is too close to the subject.
If the subject is too close, the lighting range of the flash will shift so
take photos at a distance further than 0.6 m (or 0.5 m for close-up
photos).
[ ] and the lighting angle
are flashing.
Extend the wide panel.
[ ] does not go off. The flash head has been set to point downward (7 degrees). Do not
use this setting unless you are taking close-ups.
[ ] does not go off. The wide panel is extended.
≥ The guide number (GN) is reduced.
Pay attention to the camera to subject distance.
VQT0Z62.book 34 ページ ２００６年６月２２日 木曜日 午前１１時４６分