Operating instructions

69
RQT9414
Setting menus
§1
The timer recording programmes are also cancelled.
§2
Recording on the HDD will not be deleted.
Setting for Standby
≥Press [OK] to show the following settings.
Power Save
[On] Power consumption is minimized when the unit is turned
to standby (> 84).
[Off] This sets to Quick Start Mode.
≥Refer to the chart for the Power Save function features (> 10)
when the unit is turned off.
Auto Standby
Set the time to automatically turn the unit off.
After the unit has finished operating, the unit will be turned off
once the set time has passed.
[2 hours] [4 hours
] [6 hours]
[Off] The unit will not automatically turn off.
DivX Registration
You need this registration code to purchase and play DivX Video-
on-Demand (VOD) content (> 35).
System Update
In order to update this unit’s software, the TV Guide download, and
to support system changes made by broadcasts, this unit
periodically performs software updates.
Press [OK] to show the following settings.
≥Update data and TV Guide download information are sent by an
unscheduled digital broadcast. In order to receive these updates,
you must be able to receive digital broadcasts.
≥An update will take approximately 60 minutes. While the update
is in progress, “SW-DL” appears on the unit’s display. You cannot
operate the unit until the update is complete. Removing the AC
mains lead while the update is in progress may damage the unit.
≥TV Guide download will take approximately 60 minutes. While
the TV Guide download is in progress, “GUIDE” appears on the
unit’s display. The TV Guide download can be interrupted by
switching on the unit.
TV Guide Download in Standby
[On] When you set this unit to standby mode, TV Guide data is
downloaded automatically.
[Off]
≥In the area where GUIDE Plus+ system is available, the setting
is fixed to “On” automatically.
Software Update in Standby
[On] When you set this unit to standby mode, software
updates are downloaded automatically.
[Off]
TV Guide/Software search period
Selects the time to automatically perform TV Guide download
and updates when the unit is set to standby mode. This can only
be set when “TV Guide Download in Standby” and “Software
Update in Standby” is set to “On”.
≥If there is a programmed recording set for the time you have
selected, the programmed recording will be given priority.
In the area where GUIDE Plus+ system is not available:
[Automatic
]
§
[02:00–06:00] [06:00–10:00] [10:00–14:00]
[14:00–18:00] [18:00–22:00] [22:00–02:00]
In the area where GUIDE Plus+ system is available:
[Automatic
]
§
[Daytime] (06:00-22:00)
§
The unit will give priority to searching for TV Guide download
and update data at midnight.
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not turn
your unit off during the update. This could result in the loss of
data. A message shows that the update has finished.
≥If applicable update data is found, press [2, 1] to select “Yes”
and press [OK].
[For]Germany,[Austria,[Italy,[and[Spain]
GUIDE Plus+ Data Download Now
Start downloading GUIDE Plus+ data.
≥If this is performed in standby mode for timer recording, timer
recording may not work correctly.
[For]Germany,[Austria,[Italy,[and[Spain]
GUIDE Plus+ System Information
You can check the condition of GUIDE Plus+ system of this unit.
[For]Germany,[Austria,[Italy,[and[Spain]
Post Code
You can input the postal code which is necessary to download
area specific information of GUIDE Plus+ system.
Initialize
≥Press [OK] to show the following settings.
Shipping Condition
§1, §2
All the settings except for the ratings level, ratings password, and
clock settings return to the factory preset.
[Yes] [No
]
Default Settings
§1, §2
All the settings other than the tuning settings, clock settings,
country settings ([For]France,[Italy,[Spain[and[Switzerland]), language
settings, disc language settings, ratings level, ratings password,
remote control code, return to the factory presets.
[Yes] [No
]
DMREX79&89EC-RQT9414-L_eng.book 69 ページ ２００９年５月１４日 木曜日 午前９時２３分