Operating instructions
VQT2J34
21
Recording Television Programmes
Refer to “Notes for Recording” (> 24) and “Advanced Recording” (> 25–
27) for detail information on recording.
[HDD] [ RAM ] [-R ] [-RW‹V›] [+R] [+R W]
Preparation:
≥ Turn on the television and select the appropriate video input to suit the
connections to this unit.
≥ [RAM ] If the disc is protected, release protection (> 68).
1
to turn the unit on.
2
to select the HDD or DVD drive.
3
[RAM] [-R] [-RW‹V›] [+R] [+RW] If you selected the DVD drive
to open the tray (Button located on front of the unit).
– Insert a disc with enough remaining blank space and press
[< OPEN/CLOSE] again to close the tray.
– When the format confirmation screen is displayed (> 26).
4
to select desired channel.
– To select with the numbered buttons (> 19).
– When no channel setting is performed on the unit and broadcast
is recorded directly from the digital satellite receiver, select a
channel on the connected equipment, then press
[INPUT SELECT] to select “AV2”.
5
to select the recording
mode. (> 25)
6
to start recording.
Pausing Recording
Press [;].
– Press again to restart recording.(The title is not divided.)
Stopping Recording
Press [∫].
Tips
≥If a programme to record has subtitles, Audio Description or multiple audio, you can record
with these items. They cannot be switched after recording.
– To record with subtitles
Before starting the recording, show the subtitles (> 44). If the programme has multiple
subtitle, select the desired language (> 71).
– To record with Audio Description
Before starting the recording, turn on the Audio Description and set the volume (> 44).
– To record with the selected audio
Before starting the recording, select the desired audio channel or language, if the
programme has multiple audio channel or language (> 67, 71).
≥To record sound using LPCM (XP mode only):
Set the “Audio Mode for XP Recording” to “LPCM” in the Setup menu (> 73)
OPTION
RETURN
SLOW SEARCH
DRIVE
SELECT
PAGE
CHAPTER
PROG/CHECK
EXITSTATUS
DIRECT TV REC
EXT LINKREC MODE
REC
TEXT STTL
DISPLAY TIME SLIP
SKIP
TV
STOP
PAUSE
PLAY
x
1. 3
DELETE
INPUT
SELECT
AV
VOL
CH
PAUSE LIVE TV
-10s +60s
MANUAL SKIP
OK
REC MODE
REC
INPUT
SELECT
PAGE
DRIVE
SELECT
Notes
≥[RAM] [-RW‹ V ›] [-R] [+RW] To use a new disc,
formatting is necessary. (> 26, 68)
≥[-R] [-RW‹V›] [+R] [+RW] It takes about 30
seconds for the unit to complete recording
management information after recording
finishes.
≥You cannot change the channel or
recording mode during recording.
≥This unit cannot record NTSC signals to
discs that already have PAL signal
recordings. (However, both types of
programmes can be recorded onto the
HDD.)
≥[-R] Video cannot be recorded to DVD-R
discs with JPEG images already recorded
on them.
≥Depending on the type of disc used for
recording or the type of broadcast, there
may be restrictions on the title you are
trying to record. (> 24)
DRIVE
SELECT
OPEN
/
CLOSE
HDDHDD
D
CH
XP
47:47
SP
95:34
LP
191:11
EP
381:16
Recording Mode
Rec Mode Remain
SELECT
REC MODE
REC
HDD
HDD
REC
Elapsed recording time
DMR-EX773EB_VQT2J34-B.book 21 ページ 2010年1月7日 木曜日 午後5時8分