Operating instructions

24
VQT2J39
Timer recording
1 Press [PROG/CHECK].
2 Press [3, 4] to select “New Timer
Programme” and press [OK].
3 Press [2, 1] to move through the
items and change the items with
[3, 4].
≥When “Channel” is selected, you can press the “Blue” button
to change the category [e.g., TV, Radio, Favourite (> 59)]
and then press [3, 4] to select the channel you want to
record.
≥Press and hold [3, 4] to alter the Start (Start time) and Stop
(Finish time) in 30-minute increments.
≥You can also set Channel (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥Date
≥You can also press [DRIVE SELECT] to select the recording
drive.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (> 25, Relief Recording).
≥You can also press [REC MODE] to change the recording
mode.
≥[HDD] RENEW (Auto Renewal Recording) (> 25)
ON!)OFF
≥Programme Name
You can also press [STTL ] to switch “STTL” setting.
When there are multiple languages, select the subtitle
(> 60, DVB Preferred Language).
4 Press [OK].
The timer programme is stored and the timer icon is
displayed.
“F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 2–4 to programme other recordings.
Press [Í] to turn the unit off.
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
A Icons
B Message displayed in the “Drive space” line
C Channel name, programme name and other
information are displayed.
See also “Notes for recording” (> 20).
Depending on the type of disc used for recording or the type of
broadcast, there may be restrictions on the title you are trying to
record.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
≥You can enter up to 32 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
[RAM] [-RW‹V›] [+R] [+RW]
≥To use a new disc, formatting is necessary.
You cannot switch subtitles during timer recording.
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
(> 11).
≥Make sure that the clock settings are correct (> 64).
Manually programming timer
recordings
[.
l
l
l
l
a.
Date: Current date up to one month later minus
one day
;:
Daily timer: SUN-SAT>MON-SAT>MON-FRI
;:
Weekly timer: SUN>--->SAT
Titles recorded using the same daily or weekly timer are
bundled and displayed as a “group” in the
DIRECT NAVIGATOR screen (> 27) except when using
Auto Renewal Recording.
Press [2, 1] to select “Programme Name” and press [OK].
(> 44, Entering text)
≥STTL (Subtitles)
AUTO!)OFF
When the “Channel” column is set in AV1 or AV2, this setting is
unavailable.
Note
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
Mode Stop Start No. Date
STTL
HDD
DVD
Channel
Drive
space
New Timer Programme
TUE 12.10.10. 12:54:00
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
Mode
Stop Start Channel Date
STTL
HDD
DVD
22:30 22:00 19. 10. TUE OFF HDD
1 ARD
Programme Name
SP
All Channels : ARD
TUE 12.10.10. 12:54:00
Check, change or delete a programme
F Timer recording standby is activated.
[ This programme is currently recording.
Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
finishes recording.
You stopped a daily or weekly timer recording. The icon
disappears the next time the timer programme starts
recording.
The disc was full so the programme failed to record.
The programme was copy-protected so it was not recorded.
X The programme did not complete recording because the disc
is dirty or some other reason.
Timer programmes set to Auto Renewal Recording (> 25).
Titles that have been rerouted to the HDD
(Displayed while recording.)
HDD Recording drive is set to HDD
DVD Recording drive is set to DVD
OK: Displayed if the recording can fit in the remaining
space.
> (Date): For recordings made daily or weekly, the display will
show until when recordings can be made (up to a
maximum of one month from the present time) based
on the time remaining on the disc.
! : It may not be possible to record because:
≥there is not enough space left.
≥the number of possible titles has reached its
maximum.
≥programmes are overlapped.
≥programmes are deactivated.
Relief: Timer programmes that will be relief recorded to the
HDD.
No. Channel
ARD
01

Timer icon
Mode Stop
STTL
HDD
DVD
HDD
Drive
space
SP
OK
22:30
OFF
ogramme
TUE 14.10.09. 12:56:00
Check to make sure “OK” is
displayed (> below).
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
RETURN
OK
Press OK to store new programme.
Mode
STTL
Stop Start No. Date
HDD
DVD
Channel
Drive
space
New Timer Programme
TUE 12.10.10. 12:54:00
DMREX773EC-VQT2J39_eng.book 24 ページ ２０１０年１月１４日 木曜日 午後１時３１分