Operating instructions

52
RQT6981
Advanced operation
Home Theater
§
By using the S video cable instead of the yellow video cable you
may make recordings of higher picture quality.
If the audio output of the other equipment is monaural, connect to
L/MONO. (Both left and right channels are recorded when
connected through L/MONO.)
The DV input on this unit is for use with DV equipment only.
When DV equipment is connected, it is not possible to operate the
unit from the other equipment.
Only one piece of DV equipment (e.g., Digital Video Camcorder)
can be connected to the unit via the DV Input terminal.
The picture compression system of the DV equipment you have
connected may differ from that used in this unit. In such cases,
dubbing from this equipment will not be possible.
§
By using the S video cable instead of the yellow video cable you
may make recordings of higher picture quality.
[Note]
If audio output on the other equipment is monaural, use a stereo-
monaural conversion cable (not included).
Connecting other video equipment
Connecting to the L2 and DV input terminals on
the front of the unit
S VIDEO
OUT
AUDIO
OUT
VIDEO
OUT
LR
DV
OUT
Audio/Video
cable (included)
S video cable
§
Other video equipment
Connect to the video and audio output terminals.
yellow white red
yellow white red
This unit
DV cable
(IEEE1394,
4-pin)
Connecting to the input terminals on the rear of
the unit, L1 and L3
R - AUDIO - L
R - AUDIO - L
VIDEO
VIDEO
S-VIDEO
S-VIDEO
(L3)
(L1)
IN 1 IN 3
R - AUDIO - L
R - AUDIO - L
OUT 1 OUT 2
S VIDEO
OUT
AUDIO
OUT
VIDEO
OUT
L
R
Other video equipment
Connect to the video and audio output terminals.
S video cable
§
red white yellow
red white yellow
Audio/Video cable
(included)
This unit