I PanasoniC ° DVD VIDEO RECORDER Model No. DMR-E80H Dear customer Thank you for purchasing this product. For optimum and safety, please read these instructions carefully. Before connecting, performance P.AM operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. Region number supported by this unit Region numbers are allocated to DVD players according to where they are sold.
CAUTION! THE FOLLOWING THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Read these operating instructions carefully before using the unit. Follow the safety instructions listed below. Keep these operating instructions handy for future reference. 1) 2) 3) 4) 5) 6) 7) 8) 9) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
IMPORTANT SAFETY INSTRUCTIONS Features ............................................. Accessories .......................................... (5 .................... 3 3 4 STEP f Antenna and television connections .............. STEP 2 The remote control ............................. STEP 3 Plug-in Auto Tuning ............................ STEP 4 VCR Plus+ guide channel settings ................ STEP 5 Set up to match your television ................... Disc information ....................................
Preparation To enjoy sound through other audio equipment • Refer _ the television%operating instructions. • Turn the television off and disc_aect its AC power supply cord. To enjoy progressive (,,IPpaga 51) video Connect to the component video (480P) input t_mlnals on a television compatible with this unit's copy goard sy_em. (V_en will not be displayed correctly if connected to an Incompatible tslevis_on.
STEP 2 The Opening the rear cover. remote control 3 Plug-in STEP Auto Tuning Closing the rear coven _), DVD POWER. Press with your Numbered buttons II When the cover comes off A,T,<,, ENTER • Insert so the poles (+ and -) match those in the remote control. • Do not use rechargeable type batteries. Do not: • mix old and new batteries. • use different types at the same time. • heat or expose to flame. • take apart or short circuit. • attempt to recharge alkaline or manganese batteries.
Preparation • Confirm that the antenna is connected correctly. • Turn on the television and select the appropriate suit the connections to this unit. 1 Press [_, unit on. DVD POWER] 2 to turn 4 you select Sys- Press "CAW" [A, T] to select and press [ENTER]. "TV" or The screen shown in step 2 reappears. 5 3 Press [A, V] to select "Antenna tem" and press [ENTER]. the Press [_, Y] to select the menu language and press [ENTER]. e.g.
STEP 4 VCR Plus+ guide channel settings 3 Press [A, V] to select "VCR Plus+ CH Setting" and press [ENTER]. e.g., when the current antenna system is CATV. 4 Press [A, Y] to select the channel you want to set and guide press [_-]. When selecting the guide channel, press and hold [A, .] scroll the screen up and down. to SETUP Set these guide channels so you can use VCR Plus+ codes for timer recording.
STEP 5 Set up to match your television To return to the previous Press [RETURN], screen When you are finished Press [SETUP]. _,POWERTV • Numbered buttons Regarding Progressive Television Picture Progressive image aspect (height to width ratio) is set at a standard 16:9. DVD-Video which has been set at 16:9 will be displayed correctly. However, 4:3 video material will be stretched to the right and left when displayed.
RAM RAM4.7 u) R R4.7 DVD-RAM DVD-R 4.7 GB/9.4 GB, 12 cm (5") 2.8 GB, 8 cm (3") 4.7 GB, 12 cm (5") 1.4 GB, 8 cm (3") for General Vet. 2.0 AUDIO DVD*RAM I • DVD-RAM recorded on this unit may not be compatible with other DVD players, including some Panasonic players. Consult the manual for the player to determine compatibility with these DVD.RAM discs.
Follow the precautions indicated below to prevent damage to the internal HDD. (Not following precautions may result in a loss of recording, stop of operation or recording of noise.) • During setup: • Do not place in an enclosed area so the rear cooling fan and the cooling vents on the side are covered up. • Place the unit on a surface that is flat and not subject to vibration or impact. • Place in an area where condensation does not occur.
@ @ @ u_ POWER button (_), DVD (POWER)) .................. 7, 14 Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. @ VCR Plus+ button (VCR Plus+) ...................... 24 ® Disc tray open/close button (__ OPEN/CLOSE) .......... 14 ® Numbered buttons (1-9, O, 100) @ Cancel button (CANCEL) ............................. @ Skip buttons ( 1<1<1,_ SKIP) ....................... ® Stop button (i STOP) ..........................
Controls such as O function the same as the buttons on the remote control. Remote control signal sensor ......................... HDD record lamp .................................. Disc tray ......................................... @ DVD record lamp ................................... Channel buttons for recorder (v, ^, CH) ............... r Center circle (e.g., 6 14 14 14 14 L2 input terminals (L2) .............................. Display (-)below) Time slip indicator (TIME SLIP) .......................
[HDD] [RAM] [DVO_RI HDD, DVD record lamp 5 34 6 Disctray 1 2 Press [(_, unit on. Press [HDD] recording L 1 2 DVD POWER] or [DVD] to to turn the select the drive. The HDD or DVD button lights up on the unit. • It is not possible to record to both HDD (Hard Disk Drive) and DVD drive simultaneously. 3 If you selected the DVD drive Press [_ OPEN/CLOSE] to open tray and insert a disc (-_ left). the • Press the button again to close the tray.
[Note| • You can record while the unit is on standby for timer recording, but once the time for the timer recording to begin is reached, any recording taking place will stop and the timer recording will begin. • You cannot change the channel or recording mode during recording. • Reiaese protection (cartridge -'_page 10, disc _page 36) when you record. [RAM] • When using a DVD-RAM for the first time with this unit, format it to ensure accurate recording (_page 36, "Format").
Preparation Connect a video cassette (-'>page 52). recorder to this unit's input terminals While stopped v. CH Press [INPUT SELECT] to select the input channel for the equipment you have connected. Select L1, L2 or L3. • You can also select the input channel by pressing [ ^, v, CH]. 2 o A, V, <1, I_ ENTER FUNCTIONS 8 m Press [REC MODE] to select the recording mode (XP, SP, LP or EP). Start play on the other equipment. Press [O, REC] at the point you want to start recording.
You can play a program previously recorded. During recording Press [DIRECT NAVIGATOR]. Time slip indicator on the main unit lights. 2 Press [&, T] to select a program press [ENTER]. and e.g._ You want to watch the movie you recorded yesterday (program 1) while recording pro- DIRECT NAVIGATOR A, V, 4,1_ ENTER Program 1 is played back while program 2 (sport) is being recorded. gram 2 (sport). 8 I I "1 / / / / / / [Note] • Sound is not output while fast-forwarding.
1 Disc tray 3 ERASE [HDD][RAM][DMITRI[DVD-A][DVD.'v'] IVCr} [CD][MP3] 1 2 Press [(_, unit on. Press playback DVD POWER] [HDD] or [DVD] to turn the to select the drive. The HDD or DVD button lights up on the unit. olt is not possible to playback both HDD (Hard Disk Drive) 2 and DVD drive simultaneously. 3 Press [_ OPEN/CLOSE] to open tray and insert a disc (-_page 14). DVD,TV II MENU =. DIRECT -NAVIGATOR. TOP MENU A, ¥. 4.
[HDD] [RAM] [DVI_R] A list of programs is created as you record them. You can use this list to find programs to watch. Ivcr_l Switch [DVD. TV] to "DVD" and Press the numbered buttons (0, 1-9) to select an item. _] e.g., "5": [O] '-) [5] "15": [1] ._ [5] Press [DIRECT NAVIGATOR]. The highlighted program plays in the background. [DVD_A] (DVD-V] Press [A, V, <1, I_] to select an [ENTER]. eYou may also be able to use the numbered select an item. item and press buttons (O, 1-9) e.g.
[HDD][RAM] [DVI_R] [DVD+A](Motion picture parts only) [DVD-V] [VCD While paused Press [<<1] or [IH_]. Press and hold [1<_1/<<] Numbered buttons or [l_i_/l_l_l] on the main unit. [Note] • The speed increases up to 5 steps. • Press [1_] (PLAY) to restart play. • Backward ([_14] [14
[HDD] [RAM] (Only with Dolby Digital) You can increase the speed of soundtrack. [HDD][RAM][DMITRI During play Press [CM SKIP]. play without disrupting the During play Play restarts from approximately a minute later. Press and hold [_] (PLAY/xl.3). [Note] if the start of the next program is within one minute of the point you skipped from, play restarts from the beginning of that program. To return to normal speed Press [1_] (PLAY/× 1.3).
4 Press [<1, I_] to select an asterisk and press [ENTER]. (_<) One marker is added. When marking positions 11 and above [HDD][RAM][DVD-R] 0 Press [<1, I_] to highlight "1-10". _'_ _) Press [A, Y] to select "11-20". You can select the next group of 10 when the current group is full. _) Press [1_]. The first asterisk is highlighted. @ Press [ENTER] to mark a position. To recall a marker Press [4, _-] to select a marker number and press [ENTER]. • Play starts from the marked position.
1 1 Using the tree screen to find a group ] While stopped Press [_] while a track is highlighted to display the tree screen. Selected group no./Total group no. • If the group has no track, "--" is displayed as group number. Numbered buttons You cannot select groups that contain no ENTER compatible 2 Press [&, T, <, files. I_] to select a group and press [ENTER]. The file list for the group appears.
Preparation • Ensure the clock (and guide channels for VCR Plus+ recording, -_'page 8) are set correctly. • Release protection (cartridge _page 10, disc _page 36) before proceeding. [RAM] v( Numbered bu_ons Entering VCR Plus+ codes is an easy way of programming the unit for recording. You can find these codes in newspapers and magazines. You can enter up to 32 programs up to a month in advance. 1 Press [VCR Plus+]. A, T, -<,1_ ENTER REC 2 8 Press the numbered buttons the VCR Plus+ code.
4 Youcanenter upto32programs uptoamonth inadvance. Each dailyorweekly program iscounted asoneprogram. 1 Press [ENTER] when you finished programming the timer. Press [PROG/CHECK]. -- A line that is Displayed if the recording can fit in the remaining space on the disc, • Press [A, Y] to select "New Timer Program" and repeat steps 2- 4 to program other recordings. ready for programming is highlighted. 2 have 5 Press [PROG/CHECK] or [RETURN].
[HDD] [RAM] [DMITRI 1 Press [PROG/CHECK]. Numbered buttons- Icon explanations The times ovedap those in another program. Note the following if times overlap: -The program with the earlier start time receives priority. -Recording of the program with the later start time starts when the eadier program finishes recording. -if you make two programs with the same start time, the one you programmed last receives priority. @ 8 You stopped recording of a weekly or daily timer recording.
[HDD][RAM][DMITRI 1 Press [PROG/CHECK]. The timer recording list appears, 2 Press [A, V] to select the program. oYou may also select programs by inputting a 2-digit number using the numbered buttons, e.g., "5": [O] ") [5] "15": [1] ,-) [5] ePress [41, I_] to skip down several programs on the list, 3 Press delete, [CANCEL] or [ADD/DLT] to You cannot delete programs that are currently recording. or press [ENTER] to change. The timer recording setting screen appears.
4 Select items for dubbing. O Press [A, Y] to select the dubbing list table and press [ENTER]. HDD Displayed icons on the dubbing list _: "Transfer" because of recording restriction (-_next page) Program or playlist contains still picture(s) (cannot dub) Numbered ' buttons _ : Program recorded with the "DVD-R compatible setting "ON".
To stop dubbing Press and hold [RETURN] for 3 seconds. • Data will be recorded up to the point recording was stopped. However, if you stop dubbing in High Speed mode partway, the part you tried recording will become unplayable. (Recording to DVD-R will reduce the remaining amount of recordable disc space.) TO add or remove from the dubbing list While the Dubbing List (_ step 4-O) is displayed 0 Press [A, V] to select the dubbing list and press [1_]. @ Press [A y] to select an item and press [ENTER].
While stopped Press [PLAY LIST]. 2 Press [A, V] to select" .... press [ENTER]. 3 Press [ENTER] 4--" and Numbered buttons _ I
4 While stopped Press [&, T, <1, I_] to select scene and press [ENTER]. the The scene you select is played. Press [PLAY LIST]. To show scene 10 and later Press [A, Y, <1, I_] to select "Next" and press [ENTER], oYou can also select a page of scenes by entering a 3-digit number with the numbered buttons. e,g,, "5": [0] _ [0] _ [5] "l 5": [o]-_ [1] _ [5] To stop scene play Press [11[,(The scene list appears.) 2 Press [A, V] to select and press [ENTER].
[HOD][RAM] Operation -> page 31, Playing play list scenes Preparation Press [HDD] or [DVD] to select the drive. Edit Scenes e,g,_ DVD-RAM To show scene 10 and later • Press [A. T. <. _- to select"Next" and press [ENTER]. • You can also select a page of scenes 3y entering a 3-digit number with the numbered buttons. e.g., 5": [0] -> [0] -> [5] "15": [0] -J_[1] _ [5] "HDD, DVD Once a play list has been erased it is irretrievable. Check carefully before proceeding. Numbered &. T. _1. Ib ENTER 'LAY .
I Press Add ..................................... ",,,4re;si;:i i,; (maximum of 999 scenes) [& T, <1, I_] to select the p ace Press [ENTER] Press [ENTER] where you want to add the scene and at the end point of the scene. press at the start po nt of the scene, [ENTER], _ select"Exit _ and press ' [ENTER]. The new scene is inserted before th highlighted scene Press [A, Y] to select "Next" and press [ENTER]. (Repeat to add other scenes.) • Move Repeat to move other scenes. • Re-edit [ENTER].
I Operation I Preparation Press [HDD] or [DVD] to select the drive. _ Iv_l rmar_ The program, and play lists created from it, are erased irretrievably when you use this procedure. Check carefully before ovo- M eg, preeeed og mcart_mrmarcl Entering text _ page 38 Program information (e.g., time and date) is shown. Protection _NNI f set. this will protect the program from accidental erasure -HDD, DVD e.g.
Press [<1] to, se ect rase and press [ENTER]. ! _ i ilta_, E The prog_m • The disc's available recording ume may not increase after erasing snort programs, • 3omputer data cannot be erased. • The available recording time on DVD-R does not increase when you erase programs is erased The lock s appears wrien the program _swn[eprotected. tENTER]. Press [ENTER] at of the section you want to erase.
[ Operation _ _] Preparation Press [HDD] or [DVD] to select the drive. programs m¢_!Iz_rtl 1 All programs and play lists created from / them wilI be erased irretrievably when you / use this procedure, Check carefullv before _ _o proceed ng. Preparation Release protection[cartridge .-) page 10, program_ page 34. disc _ above) before proceeding. Formatting erases all contents on the disc inca Erase the entire contents on the HDD. ncluding computer aa[a. Check carefully before proceeding.
_ _ Press [41] to set disc protection [ENTER]. ;ymbol appears closed when the disc is writs-protected. and press • Computer data and still pictures Press [_1] to select"Yes andf press [ENTER]. All programs and play lists are erased. JPEG. TIFF_ cannot be erased. • Erase does not work if one or more programs are protected. m Press [<1] • Do not disconnect the AC power supply cord while the message "Formatting the disc" is on the television. This can render the disc unusable.
Preparation Release protection before proceeding. Cartridge _page 10, program -')page 34, disc -_page 36 [RAM] After the titling screen appears Press [&, Y, <1, I_] to select character and press [ENTER]. buttons the Title field: shows the text you have entered RETURN Repeat step 1 to enter other characters. 2 Press [11]. The title is entered and the screen disappears. • You can also finish entering the title by selecting "SET" and pressing [ENTER]. l_ _.
M While playing HDD, DVD-RAM or Video CD LR_L_R e.g., DVD-RAM "L R" is selected -• If it is a recording of an SAP broadcast, [AUDIO]: [HDD] [RAM[ MAIN_SAP each time you press For your reference You can change the audio for the full images being played with simultaneous rec and play and Time Slip. [HDD] [RAM[ M While playing DVD-Audio or DVD-Video You can change the audio channel number each time you press the button. This allows you to change things like the soundtrack language. e.g.
Not available when playing CDs and MP3 discs. e.g., DVD-RAM Numbered Item Content Sound track Soundtrack language [DVI_A] [DVD_V] See [A[ below. Audio attribute [HDD][RAM][DVI_R][DVD-A][DVI_V] See [B] below. Karaoke vocals, on and off (Karaoke [DVI_V] only) Solo: ON--OFF Duet: OFF_-VI+V2_VI_V2 ¢ &,T,<, ENTER Subtitle Subtitle language See [A[ below. ¢ [DVD-A][DVD_VJ Subtitle on/off [HDD][RAM][DVI_R][DVD-A][DVI_V] Angle STILLP 1 Press [DISPLAY].
e.g., DVD-RAM Item Repeat play Content Each time you press [&, "V]: [HDD] [RAM] [DVD-R] [DVD-V] PRG: Program All Chapter Title PL: OFF OFF Playlist ([HDD] [RAM]) [VCD] [CB] Track [BVB*A] [MP3] Track All OFF Group OFF To cancel: Select "OFF". Marker Remarks oYou cannot use repeat play to repeat an entire DVD-Audio, DVD-Video, MP3 discs or all the play lists on a DVD-RAM. oRepeat play does not work if the disc's elapsed play time is not shown on the unit's display.
• When "User" is selected Select _Detailpicture adjustment". ("User"-) [<1]-) [Y]-) [ENTER]) Page 1/2 of "Detail picture adjustment" A, Y, <1, I_ ENTER [HBD] [RAM] [DMITRI [DVD-A][BVD-V] VCD] [CD] IMP3] By using the FUNCTIONS window you may access the main functions quickly and easily. Contrast Increases the contrast between light and dark parts of the picture (-7 to +7). While stopped Brightness Brightens the picture (0 to + 15). e.g.
Displeye appear on _lo telc_/ision when you Operate the unit to let you krlcw what Operation was performed and what GondiUonthe urfit is Jr1, eYeu carl change the setting irt the SETUI _ menu _o the first display does net appear automatically (-_page 45, Display--Status Messages). Ni0i_ii_lay e.g., HOD .................. @ Currant recording or play atatusiinput and caption (if entered) REC: channel I_ec.
This chart shows the initial settings for this unit. See page 46 for details on menu operation. • Underlined items are the factory presets. Tabs Channel Menus Options Antenna System (-]_page 7) Selo_;t fo scit the type of antenna you ere USing. Chermels are sot correspondirrg to the arrterma systars you select. Auto Channel Setting (-f'page 7) The urt[t Sets the chanrlels eutarsaticall_,,_ Preset Chsnnel Csption (-)page 48) You can give preset capttons to the channels.
Tsbs Video Audio Menus Options Still Mode Select the type sf picturo shswrl when you pause play. e_ • Field: Seamless Play Tutr_ searolass play erl or"0_ orl dims wifo play Iisto, eSeamlcss Play does not work with programs recsrded LPCM or when csing Quick Vi¢_,. ton: Lass blurred ifald stills are shown. Select if iittadng occur_ when "Aufornati¢" is selected. • FFarrle: Sharper frarne stills aid sf_l. _._c_'t ff srnsll fo_t or firx., p_tterr'_ cannot bc _rl de_Jdywhen "Aufornsgc" is _lo_¢vJ.
Partasenis DVD pi_y_ _rld r_bso_or_ systorrt so they may _spond _rrtote oor_rol, Change (the two must metoh} i= Uso "1", the f_story use the saree unintentionally r_rneto _ e cornrn_nd the code on this unit _rld its ferrets if you place c'quipmertt sot oode, under normal olose sorttrol from this sorttr_l t_;ottlon olrsurrtst_rtso8, While stopped Press [SETUP] to show the menus. 2 Press [A, Y] to select "Set Up" and press [1_].
Preparation I If you c-onncct tha unit through a cauls "IV box or DSS recoiver (4page 50}, tuna to your Is(:.31PBS station before _'tartirLq auto clock satting. Use manual elouk setting if auto clock setting does not work or if there is no Isual F'BS channel in your area. 1 2 Press [SETUP] Press [&, _] press [1_]. to show[he to select Manual 3 CIockSetting Press [&, Y] to select "Manual Setting" and press [ENTER]. menus.
4 Press [4, !f] to select the caption and then press [1_], You san cheese from the ft_llg_dng captions. ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC, FAM, MAX, MTV, SHOW, TBS, USA, TNT, CBC, UPN, CT_, WB, TSN, DSC, GLOB rathe screen scrolls e page eta t(rno if you press arrd held [A, v], 5 Press [4, T] to select corresponding to the then press [_I], the channel caption and • Channels ere net displayed if they de not contein a stetierr er if captierrs have beorr added manually.
What you want to do Reference R_.4eren_ pages pages Enjoying CATV/Satellite broadcasts 5{) Enjoying 5,1channel surround 51 45 51 45 sound with Dolby Digital and DTS Enjoying stereo or Dolby Pro Logic [_] ili_iii_i_!!,iii:!ii,_ 51 Other uses Hccordto digitalrecordingaquipmantor ca_eL_e dock (-)page 51) Recordfrom a vidaocassatl:arocordcr (4page 52} 45 ManufaGtur_}d undor Ii_nso frol_i Dalby Laboratorio_.
eTho oqu(prnont _ormootion_ do_oribcd aro oxarnple_. • Poriphural uquJprnont and optional Gabloa sold auparatoly urflu_,_othorwi_o indiGatod. • Boforo c_onn_on, turn off all oquipnlorlt and road the appropfiato oporatirlg irlstruotiorla. • Tho _(grtal frorT1tho GaDIoTV box or 8atollito rooo(vor pu_( '.,,_through this unit to tho tolovi_ion _,_rt whorl thia un(t i_ turnod off, You flood to subscribo to o cablo TV or satollito TV so rvic¢.,,to onjoy viuwing thoir prograrnrning.
Th]s modal can play Dolby Drgital, but only in two charmols. Th]s modol doos not havo a DTS do(:odor. "Youmust oorvlo_,'t a un]t with a Oolby Digital or DTS docodor to orljgy surround sound. Am p!i_et This unit ....... Recording to digital recording equipment or cassette tapes Digital recording You carl rocord tho digital signal directly to digitol r_cardirtg aquiprnortl: (-i_ Oorin¢_tiort [A] abovo}.
1 Connecting of the unit to the I-2 input terminals on the front Connecting to the input terminals the unit, L1 and L3 on the rear of J • hi_ urdt _hi_ ur_it iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiIiiiiiiiiI iiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiL jiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiii ¸i_iiiiiiiiiiiiiiiiiii ¸_iiiiiiiiiiiiiiiii ¸ Other video equipment Connect to the video and au
Usr_ ortr_ of thr_ Tollo_dng Gonrtogions I Asingletwin to suit th¢_ _rttorlrto load, Usr_ ortr_ of tho f_llowirt_ lead orl your tolovisiorl, 300-75 kof_r cor_r_o@ono to suit th¢_ ortl;orlrto to t[to tolovisiorfs opo_tirl_ t¢_rminalo lrl_ruGtiorls, O tr"artgormcr (not irTcludcd) • Atwin lead and coaxial plug terminal Td_'vision UHF (Flat) T_drlload 3_0 _ cablo 75 _ coaxial cablo • Atwin lead terminal • A twin lead and a coaxial cable _rn ttToant_mna 75 _ c.
Sit_roam This is the digital form of r'nuitPchannel audio data (a.g., 5.1 ehanrtel) before {t is de_x_dad into its vadous channels. CPRM (Content Protection _or Reeordable Media) CPRM is trio copyright protection technology that is ca(vj fo protect broaduasts that are allowed to be r_ordad only once (e.g. some CATV broadcasts). Decoder A decoder restores the ceded audio signals on DVDs to rlorr_al. This is called deooding.
On the television Page NO diec. eYou haven't insert(y3 a disc, Corroctly irlsc_ a disc that this unit con uso. eThe disc is upside dewrl. If it is a 8ingle-_ided disc, insert it so the label is facing up. 10 14 • The unit connot rocetd err the disc you insert(YJ. Irlce_ a DVD-RAM or unflrralized DVD-R. eYou insertod an ceforrnatted DVD-RAM, Format the disc with this unit, 10 36 This diec c_nnot be read, • You irrserted an incampetible disc. 10 Please check write protect tab on the diec.
Beforerequ_trng eervi_,ITreKe the below uh¢._k_. Ifyou ere indoubt e_ut sorne o?the check peinl:s, orifttle remedies indicatedinthe oherl: de notsolve_e problem: In the U.S.A., contact the Panasonie Customer Call Center at 1-8_ 211-7262, or e-mail consumerpreduots@panesonis.com, or the websi_ (http:flwww.panasonie.oom). In Canada, contact the Panasonic Canada Inc. Customer or an authorized Sewisentre closest _o you. Care Centre at 1-800-561-5505, or visit the website (www.panasonis.
Sound Page Cannot switch audio dudng stereo or SAP broadcasts, Pl_y Displays The display is dim. Remote control The remote control doesn't work.
Recording and timer recording Timer recording work properly. does not Page eTtlc timer program is InCOrTOCt.Co_cct the program. • Different timer program times overlap. eThc cleck is wr_ng. Go to the Sat Up menu end correct it with "Cleck Settings _. The timer program remains even after recording finiehes. eThc program remains if you select "DALLY" or "WEEKLY _.
Recording system: (DVD-RAM), E_JDvideo standards (DVD-R) S_,'stern with 1 lens, 2 irttagratJcrt units (662 rim wavolongth for DVDs, Optical pick-up: Recordable [_JO video r_csrding _'tandards discs: T_0 rlrrtwa_Jlerlgt|l tar CDs} 12 urn (5 _) 4.7 GB DVD-RAM discs 12 urn (5 _) 9.4 GB DVD-RAM discs 8 cm (3"} 2.8 GB DVD-I,_M discs 12 crn (5 _) 4.7 GB DVD-R discs 8 cm (3"} 1.4 GB DVD-R discs (for Gcnoral Vor. 2.0) eMux. 8 hours (using 4.
Panasonte Consumer Etectronics Company, Panasonte Oivlsion of Matsushfta Electric Corporation of America One Panasootc Way Secaucus, New Jersey 07094 Panasonic DVD Limited Limited Warranty Coverage If yourpn_uc_ dc_s no1work prosody because of a defeclin tnatet_ls c_work_anshipr Panason_cConsumer Electmn_ company or Panasoclc Sales Company ic_le_vely fell'red to as"1_ewarranlor_ '.
Panasonie Canada JnCT 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONICFI'ECHNICS PRODUCT--LIMITED WARRANTY Panasonic Canada Inc. _arr'drlts this produ_'t to be free frorn defects in material and workrnartship period as stated below frorn the date of original purchase.
iiii i i ii ii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii :_iiiiJ_iiii '' _ iiiiiiiiiiii iid_iCA iiiiiiNAVIGATORiii iiiiiiiAi iiiiiiiiiiiiiENTERiii IRNiiii iiiiiiiiiiMEMORYiii Cusndo terminu / Pulse [S_TUPJ.
• Si selecciona el elemento pare ealida progresiva (480P) Sele_iono Video en el mor_0 on pantsl[a y "]iusto "Tr'ansPoror_{;ra _ do ,]cuorde con o{ tipo do re,]:oriel on roprodLt{;ci6n duranto {aropreduGci6n. Duranto I,] roptodu{;ci6n 1, Pulse [DISPLAYJ. 2. Pulse [,k, V] p,]r',] solocaionar Widoe _ y pulse [1_]. 3. Pulse [_i, V] par'] SOIOC-_{On,]F"Progr_s{_r,I" y pulse [llPJ dos VCY$OS. 4. Pulse [A, Y] p,]ra sOlo_x;ion,]r "Tran_'foror_ei,]" do ,]{;uordo {;errol ripe do m,]torf,]l on roprodu{;{;i6n.
Angle............................ 45 7 45 Antenna system .................... Audio at%ribute .................... Erase all program play list play list scene .............. pn_._ram ................... 36 81,32 81,83 19, 34 ................... ................... Channel caption ................... Channel eetting .................... Chaeing play ...................... Cleaning disc .......................... lens ......................... main unit ..................... Clock sstting .............