Operation Manual

Preparations
Charging battery
VQT5E85
- 19 -
Charging the battery
We recommend charging in a location where the ambient temperature is between 10 °C
and 30 °C (50 °F to 86 °F) (same for the battery temperature).
Make sure that the camera is turned off.
USB connection
cable (supplied)
AC adaptor (supplied)
Computer
Getting ready:
Turn on the computer.
When charging the camera, connect the USB connection cable (supplied) to the
[AV OUT/DIGITAL] socket (gold terminal).
[AV OUT/DIGITAL] socket
• Place the camera in an upright
position, and find the gold
terminal at the bottom.
Insert the USB connection cable so
that its [
] mark will face the [ ]
mark side of the camera.
• Always check the direction of the pins and hold the plug straight to insert or remove it.
(If the cable is inserted in the wrong direction, the pins could become deformed and cause faulty
operation.)
Also, do not insert into the wrong socket. Doing so may cause damage to this unit.
■
Charging the battery by connecting the camera to the electrical outlet
Connect the AC adaptor (supplied) and the camera using the USB connection cable
(supplied), and plug the AC adaptor into the electrical outlet.
• Be sure to only use the AC adaptor (supplied) indoors.
■
Charging the battery through the computer
Connect the camera to the USB connector of a computer using the USB connection
cable (supplied).