Operating Instructions
Table Of Contents
- Contents
- Before Use
- Preparation
- Basic
- Recording
- About the LCD Monitor
- Using the Zoom
- Taking Pictures Using the Built-in Flash
- Taking Close-up Pictures ([AF Macro]/[Macro Zoom])
- Taking Pictures with the Self-timer
- Compensating the Exposure
- Taking Pictures Using Auto Bracket
- Taking Pictures with different image effects (Creative Control Mode)
- Taking panorama pictures (Panorama Shot Mode)
- Taking pictures that match the scene being recorded (Scene Mode)
- Entering Text
- Using the [Rec] Menu
- Using the [Motion Picture] Menu
- Playback/Editing
- Wi-Fi
- Connecting to other equipment
- Others
- 156 -
Wi-Fi
1 Press [Wi-Fi].
2 Press 3/4/2/1 to select [New Connection], and then
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination
from [History Connection] (P135) or [Favorite Connection] (P136).
3 Press 3/4 to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4 Press 3/4 to select [Web service], and then press [MENU/SET].
5 Press 3/4 to select [Via Network], and then press [MENU/SET].
6 Press 3/4 to select connection method, and then press [MENU/SET]. (P138)
7 Press 3/4/2/1 to select a WEB service you want to connect, and then press
[MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting, press
[DISP.]. (P145)
8 Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
•
To change the setting or disconnect, press [Wi-Fi]. (P142)
9 Select and send the images. (P153)
•
Images uploaded to the WEB Service cannot be displayed or deleted with this camera. Check
images by accessing the WEB Service with your smartphone/tablet or computer.
• If sending images fails, a report email outlining the failure will be sent to the email address registered
with “LUMIX CLUB”.
• Images may contain personal information that can be used to identify the user, such as a
title, the time and date when the images was taken, and the location where the image was
taken. Check this information before uploading images to WEB services.
When sending images to WEB Service
Preparations:
You need to register to “LUMIX CLUB” (P163) to send a picture to a WEB service.
To send images to a WEB service, you need to register the WEB service.
(P166)
• Panasonic assumes no responsibility for the damages resulting from the leakage, loss, etc.
of images uploaded on WEB services.
• When uploading images to the WEB Service, do not delete images from this camera, even
after they have finished sending, until you have checked that they have been properly
uploaded to the WEB Service. Panasonic assumes no responsibility for the damages
resulting from the deletion of images stored in this unit.