Manual

_z [POWER SAVE]
(Turning off this unit automatically)
Press [_] to display the [SETUP] menu
and select the item to set. (P19)
Power save mode is activated (the camera
is automatically turned off to save the
battery life) if the camera has not been
used for the time selected on the setting.
[OFF]l[1 MIN.]I[2MIN.]I[SMIN. ]I[10MIN.]
• Press the shutter button halfway or turn
the camera off and on to cancel power
save mode.
• Power save mode is fixed to [2MIN.] when
economy mode is activated and [EMIN.] in
simple mode [V].
• Power save mode is not activated in the
following cases.
-When using the AC adaptor
(DMW-AC6PP; optional)
-When connecting to a PC or a printer
-When recording or playing back motion
pictures
- During a slide show (P73)
EC0 [ECONOMY]
(Turning off the LCD monitor
automatically)
Press [_ ] to display the [SETUP] menu
and select the item to set. (P19)
The brightness of the LCD monitor is
reduced, and the LCD monitor is turned off
automatically while the camera is not in
use, to save battery life when recording.
[OFF]: Economy mode cannot be
activated.
[LEVEL 1]: The LCD monitor turns off if the
camera is not operated for
about 15 seconds.
[LEVEL 2]: The LCD monitor turns off if the
camera is not operated for
about 15 seconds or for about
5 seconds after recording.
• The status indicator lights while the LCD
monitor is turned off. Press any button to
turn on the LCD monitor again.
Preparation
• Power save mode is fixed to [2MIN .] in
economy mode.
[However, power save mode is not
activated when using the AC adaptor
(DMW-AC6PP; optional).]
• Economy mode is not activated in the
following cases.
-In simple mode [V]
-When using the AC adaptor
(DMW-AC6PP; optional)
-While a menu screen is displayed
-While the self-timer is set
-While recording motion pictures
(@ [WORLD TIME]
Press [ _ ] to display the [SETUP] menu
and select the item to set. (P19)
Set the time in your home area and travel
destination. (P57)
[,,_]: Travel destination area
[_-_- ]: Your home area
i_ [MONITOR]
Press [ _ ] to display the [SETUP] menu
and select the item to set. (P19)
Adjust the brightness of the LCD monitor in
7 steps.
[] [GUIDE LINE]
Press [ _ ] to display the [SETUP] menu
and select the item to set. (P19)
Set the pattern of the guide lines displayed
when taking pictures. (P36)
You can also set whether or not to have the
recording information and histogram
displayed when the guide lines are
displayed.
[REC. INFO.]: [OFF]/[ON]
[RISTOG RAM]:[OFF]/[ON]
[PATTERN]: [ []]/[ []]
[TRAVEL DATE]
Press [ _ ] to display the [SETUP] menu
and select the item to set. (P19)
Set the departure date and the return date
of the vacation. (P55)
[OFF]/[SET]
21
VQT1039