Quick Start Guide

Advanced-Viewing
67
VQT1X17
[MULTI] setting
1 In step
4
, delete all the texts, select [EXIT], and press [MENU/SET].
2 Press [MENU/SET] to close the menu.
Note
Text can be scrolled if all of the registered text does not t on the screen.
The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode or [TRAVEL DATE]
location setting can also be registered by using the operation in steps
4
and following.
The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode, [TRAVEL DATE]
location setting and [TITLE EDIT] cannot be registered at the same time.
You can print out texts (comments) using the “PHOTOfunSTUDIO” bundled software on
the CD-ROM (supplied).
You can set up to 50 pictures at one time with [MULTI].
You cannot use [TITLE EDIT] for motion pictures, pictures protected and pictures taken
with other equipment.
s
[TEXT STAMP]
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures larger than 3M will be resized when
stamping the date etc. on them.)
1
Select [TEXT STAMP] on the [PLAYBACK] menu. (P18)
2
Press
e
/
r
to select [SINGLE] or [MULTI] and
press [MENU/SET].
[SINGLE] [MULTI]
Press
w
/
q
to
select the picture.
Press
e
/
r
/
w
/
q
to
select the pictures.
A
3
Select the picture, and then
press [MENU/SET] to set.
• [
d
]
A
appears on the screen if
the picture have added the text
stamp.
For [MULTI] setting
Press [DISPLAY] to set (repeat),
and then press [MENU/SET].
The setting is cancelled when
[DISPLAY] is pressed again.
4
Press
e
/
r
/
w
/
q
to select [SHOOTING DATE], [AGE], [TRAVEL DATE]
or [TITLE], and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[W/O TIME]: Stamp the year, month and date.
[WITH TIME]: Stamp the year, month, day, hour and minutes.
[AGE] (P45)
If this is set to [ON], [AGE] is stamped on the pictures.
[TRAVEL DATE]
If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.
VQT1X17_DMC-LS85_EB_EN.indb 67VQT1X17_DMC-LS85_EB_EN.indb 67 2008/12/24 18:25:482008/12/24 18:25:48