Operating Instructions

VQT2G44

Basic

∫ Switching the displayed image while maintaining the Playback Zoom

You can switch the displayed image while maintaining the same zoom magnification and

zoom position for the Playback Zoom.

Switch to picture select operation by pressing

the rear dial during Playback Zoom, and select

pictures with 2/1.

• It will switch between picture select operation and move

zoom position operation every time the rear dial is pressed

during Playback Zoom.

Note

• You can also delete the recording information etc. on the LCD monitor/optional external

viewfinder during Playback Zoom by pressing [DISPLAY].

• If you want to save the enlarged picture, use the trimming function. (P139)

• The Playback Zoom may not operate if pictures have been recorded with other equipment.

• The zoom magnification and the zoom position are canceled when the camera is turned off

(including power save mode).

• The zoom position returns to the center in the following images.

– Images with different aspect ratios

– Images with different numbers of recorded pixels

– Images with a different rotation direction (when [ROTATE DISP.] is set to [ON])

• Playback Zoom cannot be used during motion picture playback or pictures with audio playback.

Deleting Pictures

Once deleted, pictures cannot be recovered.

Press [(].

To delete a single picture

Select the picture to be deleted, and then

press [‚].

A [(] button

B [DISPLAY] button

C [

‚] button

Press 2 to select [YES] and then press

[MENU/SET].

/SET

DMC-GF1KPP-VQT2G44_eng.book 53 ページ２００９年８月１７日　月曜日　午後１時１９分