Operating Instructions / Owner’s Manual Digital Camera Model No. DC-BS1H Please read these instructions carefully before using this product. Register online at http://shop.panasonic.com/support (U.S.
About Operating Instructions About Operating Instructions ■■Symbols Used in This Document Operating symbols A B A Cursor button up/down/left/right B Control dial ●● Other symbols, such as icons shown on the screen of the output destination, are also used in explanations.
Contents Contents About Operating Instructions 2 4. Recording Videos 1. Introduction 6 Recording Videos..............................................................46 Recording Videos.............................................................46 Before Use...........................................................................6 [Exposure Mode]..............................................................48 Standard Accessories.........................................................
Contents 5. Recording settings 69 7. Output image 137 Focus / Zoom.....................................................................69 HDMI Output Settings.....................................................137 Selecting the Focus Mode...............................................69 Settings for Down-Converting........................................138 Using AF..........................................................................
Contents 11. Menu Guide 178 12. Remote Operations 213 List of Menu.....................................................................178 About Remote Operation................................................213 [Rec Mode] menu.............................................................182 Tethered Recording.........................................................216 [Video] menu....................................................................182 Installing “LUMIX Tether”.....................
1. Introduction - Before Use 1. Introduction Before Use ■■Firmware of Your Camera/Lens Firmware updates may be provided in order to improve camera capabilities or to add functionality. Make sure that the firmware of the camera/lens you purchased is the latest version. We recommend using the latest firmware version. ●● To check the firmware version of the camera/lens, attach the lens to the camera and select [Firmware Version] in the [Setup] ([Others]) menu.
1. Introduction - Before Use ■■Condensation (When the lens is fogged up) ●● Condensation occurs when there are temperature or humidity differences. Take care as this may lead to soiling, mold, and malfunctions in the lens. ●● If condensation occurs, turn off the camera and leave it for approx. 2 hours. The fog will disappear naturally when the temperature of the camera becomes close to the ambient temperature.
1. Introduction - Standard Accessories Standard Accessories Check that all the accessories are supplied before using the camera. ●● The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Operating Instructions / Owner’s Manual ” (supplied). ●● Digital camera body (Digital camera body is referred to as camera in this document.) ●● AC adaptor – This is used for power supply.
1. Introduction - Lenses That Can Be Used Lenses That Can Be Used The lens mount of this camera is compliant with the L-Mount standard of Leica Camera AG. It can be used with 35 mm fullframe compatible interchangeable lenses and APS-C size interchangeable lenses of this standard. This camera is capable of sensor read out suited to the image circles of 35 mm full-frame interchangeable lenses and Super 35 mm interchangeable lenses.
1. Introduction - Memory Cards That Can Be Used Memory Cards That Can Be Used You can use the following memory cards with this camera. (As of October 2021) SD memory card/SDHC memory card/SDXC memory card (Maximum 256 GB) ●● SD memory card, SDHC memory card, and SDXC memory card are referred to by the generic name of card in this document. ●● This camera supports cards compliant with UHS Speed Class 3 of the UHS-I/UHS-II standard and Video Speed Class 90 of the UHS-II standard.
1. Introduction - Names of Parts Names of Parts ■■Front 1 2 3 7 8 9 10 11 4 12 13 14 5 6 1 Status indicator ( 264 / Lamp / Indicator Display) ●● This displays the power status. ] Camera ON/OFF button ( 2 [ 3 Contact points 4 Sensor 5 Lens release button 6 Lens lock pin 7 Front tally lamp ( 18 / Turning the camera on) 264 / Lamp / Indicator Display) ●● This will light when recording begins. It will also blink when the available recording time of the recording medium becomes short.
1. Introduction - Names of Parts ■■Top 22 ■■Bottom 23 24 15 16 17 18 19 20 21 22 25 26 27 15 Video rec. button ( 46 / Recording Videos) 33 / Camera Setting Operations, 16 [MENU/SET] button ( 33 / Camera Setting Operations) 17 Cursor buttons ( 18 Control dial ( 41 / Menu Operation Methods) 33 / Camera Setting Operations) 19 [ ] (Delete) button / [ ] (Cancel) button 20 [NETWORK] connection lamp ( 264 / Lamp / Indicator Display) ●● Displays the network status.
1. Introduction - Names of Parts ■■Back 37 28 29 38 39 30 40 31 41 32 42 33 34 43 44 36 35 28 Rear tally lamp ( 264 / Lamp / Indicator Display) ●● This works the same as the front tally lamp. You can set whether to make the lamp light at the menu screen separately from the front tally lamp. ( 200 / [Tally Lamp]) 29 AUDIO terminal cover 30 [MIC] terminal ( 145 / External Microphones (Optional)) ●● This connects the external microphone.
1. Introduction - Names of Parts 39 [SDI OUT] terminal ( 22 / Connecting the external monitor) ●● This connects external monitors etc. and outputs an SDI signal. 40 [TC IN/OUT] terminal ( 63 / Preparations for Time Code Synchronization) ●● This connects with an external device and inputs/outputs a time code. 41 [GENLOCK IN] terminal ( 66 / Genlock settings) ●● This connects with an external device and inputs a sync signal.
1. Introduction - Names of Parts ■■Right side ■■Left side 46 47 48 49 50 51 52 22 53 45 34 54 55 22 45 Fan outlet ●● The fan outlet for the cooling fan. Do not block it when using this camera. 46 REMOTE terminal cover ●● Keep the REMOTE terminal cover out of reach of children to prevent swallowing. 47 [REMOTE] terminal ( 150 / Using a remote control unit) ●● You can control a part of the function remotely by connecting the remote control unit (commercially available) to the camera.
2. Getting Started - Power supply 2. Getting Started Power supply You can supply power to the camera using an AC adaptor (supplied), a PoE+*1 compatible switching hub or PoE+ compatible injector (commercially available), and a battery pack (optional)*2. *1 PoE+ is an abbreviation of Power Over Ethernet Plus. *2 This will be referred to as “battery pack” or “battery” onwards.
2. Getting Started - Power supply ●● Do not use any other AC adaptors except the supplied one. This may cause malfunction. ●● Do not use any other AC cables/AC mains leads except the supplied one. This may cause malfunction. ●● Turn off the camera before connecting or disconnecting the power plug. ●● Do not leave any metal items (such as clips) near the contact areas of the power plug. Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the resulting heat generated.
2. Getting Started - Power supply Turning the camera on 1 Turning the camera on. ●● Press and hold the camera ON/OFF button for more than one second. ●● The status indicator will light up. ●● You can change the language displayed on the screen from [Language] ([ Turning the camera off 1 Turning the camera off. ●● Press and hold the camera ON/OFF button for more than two seconds. ●● The status indicator will go off. - 18 - ]) in the [Setup] ([Others]) menu.
2. Getting Started - Power supply Power Indications ■■External Monitor Displays A When supplying power with an AC adapter B When supplying power by connecting to a PoE+ compatible switching hub C Battery indication Battery indication 75% or higher 74% to 50% 49% to 25% 24% or below Low battery Blinking in red ●● Charge or replace the battery. ●● The battery level indicated on the screen is an approximate. The exact level varies depending on the environment and the operating conditions.
2. Getting Started - Attaching a Lens Attaching a Lens ●● Change the lens in a location where there is not a lot of dirt and dust. If dirt or dust gets on the lens ( 274 / Dirt on the image sensor) ●● Change the lens while the lens cap is attached. 1 2 Turn the camera off. ●● Press and hold the camera ON/OFF button for more than two seconds. Turn the lens rear cap and the body cap in the direction of the arrow to remove them.
2. Getting Started - Attaching a Lens Removing a Lens Turn the camera off. ●● Press and hold the camera ON/OFF button for more than two seconds. While pressing the lens release button, rotate the lens in the direction of the arrow until it stops and then remove it. A A Lens release button ●● After removing the lens, be sure to attach the body cap and the lens rear cap.
2. Getting Started - Connecting the external monitor Connecting the external monitor Connect the camera to an external monitor or external recorder etc. to output video and audio. Connecting to the external monitor Preparation: ●● Turn off the camera, external monitor, or external recorder etc. 1 Connect the camera and external monitor or external recorder with an HDMI cable or BNC cable.
2. Getting Started - Connecting the external monitor ●● It is recommended to use a double shielded BNC cable equivalent to 5C-FB. ●● Use a Premium High Speed HDMI cable (Type A - Type A plug). ●● You can output via HDMI and SDI at the same time. You can also connect to either “LUMIX Tether” or “LUMIX Sync” at the same time.
2. Getting Started - Connecting the external monitor ■■Removing the cable lock band ●● To remove the cable lock band, follow the steps for attaching it in the reverse order. ●● It may not be possible to attach HDMI cables or USB connection cables depending on the shape.
2. Getting Started - Inserting Cards (Optional) Inserting Cards (Optional) This camera supports the double card slot function. When two cards are used, relay recording and backup recording are available. Inserting / removing the card 1 2 Open the card door. ●● Slide the card door release lever to the direction of the arrow. Insert the cards. ●● Match the orientation of the cards as shown in the figure and then insert them firmly until they click.
2. Getting Started - Inserting Cards (Optional) 3 Close the card door. ●● The card will be displayed onto the screen of the output destination. ●● You can set the way to record to card slots 1 and 2: [ ] [ ] [Double Card Slot Function] ( 29 / [Double Card Slot Function]) ■■Indications during card access The card access light A turns on while the card is being accessed. A ●● Do not perform the following operations during access.
2. Getting Started - Inserting Cards (Optional) Removing a Card Open the card door. Push the card until it clicks and then pull the card out straight. ●● The card may be warm just after the camera has been used. Formatting Cards (Initialization) Format the cards with the camera before use in order to ensure optimal card performance. ●● When a card is formatted, all of the data stored in the card is erased and cannot be restored. Save a backup of necessary data before formatting the card.
2. Getting Started - Inserting Cards (Optional) [Folder / File Settings] Set the folder and file name where to save the images. Folder name File name Folder number (3 digits, 100 to 999) 5-character user-defined segment 3-character user-defined segment File number (4 digits, 0001 to 9999) Extension [MENU/SET] [ ] [ ] [Select Folder]*1 Select [Folder / File Settings] Selects a folder for storing images. Creates a new folder with an incremented folder number.
2. Getting Started - Inserting Cards (Optional) [File Number Reset] Refresh the folder number to reset the file number to 0001. [MENU/SET] [ ] [ ] Select [File Number Reset] Settings: [Card Slot 1] / [Card Slot 2] ●● When the folder number reaches 999, the file number cannot be reset. We recommend backing up your data and formatting the card. ●● To reset the folder number to 100: Perform [Card Format] to format the card.
2. Getting Started - Setting the Clock (When Turning On for the First Time) Setting the Clock (When Turning On for the First Time) When turning the camera on for the first time, to record the information of the correct time and date, make sure to set the clock and time zone before using. The clock will automatically advance from 0:00:00 1/1/2021 at the point the camera is turned on for the first time. Clock Set 1 2 Turn the camera on. ●● Press and hold the camera ON/OFF button for more than one second.
2. Getting Started - Setting the Clock (When Turning On for the First Time) 3 Set the clock. : Select an item (year, month, day, hour, minute, or second). : Select a value. To set the display order and time display format ●● The setting screen of the display order and time display format will be displayed if you select [Style] with and press [MENU/SET]. A Display order B Time display format 4 Confirm your selection. ●● Press [MENU/SET]. ●● The clock settings are maintained for approx.
2. Getting Started - Setting the Clock (When Turning On for the First Time) Time zone 1 2 Display the setting screen of the [Time Zone]. ●● [MENU/SET] [ ] [ ] [Time Zone] Set the time zone. ●● Select a time zone with , and press [MENU/SET]. ●● If you are using Daylight Savings [ To return to the normal time, press ], press . (The time will move forward by 1 hour.) again.
3. Basic Operations - Camera Setting Operations 3. Basic Operations Camera Setting Operations When changing the camera settings, operate the camera using the following operation parts. To prevent accidental operation, you can disable operation with the operation lock switch. A B C A Control dial ( ) Rotate: Selects an item or numeric value. B Cursor buttons ( ) Press: Selects an item or numeric value. C [MENU/SET] button Press: Confirms a setting. ●● Displays the menu during recording and playback.
3. Basic Operations - Display Settings Display Settings The recording information or menu screen will only be output to either the HDMI output destination or SDI output destination. Information Display (HDMI/SDI) You can set the output destination of recording information or menu screen. The default setting is set to [AUTO]. [MENU/SET] [ ] [ ] Select [Info Display (HDMI/SDI)] Only displays to the external device connected via HDMI.
3. Basic Operations - Display Settings Output destination screen display The following icons will be displayed on the output destination screen upon purchase. ●● For information about the icons other than those described here ( 59.94p 100 F 4.0 1 [Photo Style] 2 Level gauge 3 [Rec.
3. Basic Operations - Display Settings Switching the Display Information The recording information (icons) on the recording screen and playback screen can be hidden. You can also display the control panel. 1 Set [Display Information].
3. Basic Operations - Display Settings Switch the information display with a Fn button If you register the [Display Information] to a Fn button, the display switches every time you press that Fn button. ●● About Fn buttons ( 160 / Register Functions to the Fn Buttons) ■■Recording Screen 59.94p 100 F 4.0 24m59s 3200 A [WITH INFO] B [WITHOUT INFO] C [CTRL PANEL] ■■Playback Screen 2021.12. 1 10:00 100-0001 1/999 24m59s 1/5 3200 100 F4.0 2021.12. 1 10:00 100-0001 100 F 4.0 59.
3. Basic Operations - Control Panel Control Panel This screen allows you to view the current recording settings on the monitor. 1 2 3 4 Display the control panel. ●● [MENU/SET] [ ] [ ] [Display Information] [Display Info in Rec Mode] [CTRL PANEL] Close the menu. ●● Press [ ] several times. Select a menu item. . ●● Press Change the setting. ●● Rotate to select a setting. ●● Refer to the pages explaining each item for information on how to change the settings.
3. Basic Operations - Quick Menu Quick Menu This menu enables you to quickly set functions that are frequently used during recording without calling up the menu screen. You can also change the Quick menu display method and the items to display. 1 2 3 Display the Quick menu. ●● Press [Q.MENU]. Select a menu item. . ●● Press Select a setting item. ●● Rotate . F4.
3. Basic Operations - Quick Menu 4 Close the Quick menu. ●● Press [Q.MENU]. ●● Some items cannot be set depending on the recording mode or camera settings. ●● The Quick menu can be customized: [ ] [ ] [Q.
3. Basic Operations - Menu Operation Methods Menu Operation Methods In this camera, the menu is used for setting a wide variety of functions and performing camera customizations.
3. Basic Operations - Menu Operation Methods 1 2 Display the menu. ●● Press [MENU/SET]. Select a main tab. to select a main tab and then press . ●● Press ●● You can also perform the same operation by pressing [Q.MENU] or by rotating to select a main tab, then pressing [MENU/SET]. 3 Select a sub tab. to select a sub tab and then press . ●● Press ●● You can also perform the same operation by rotating to select a sub tab, then pressing [MENU/SET].
3. Basic Operations - Menu Operation Methods 4 5 6 Select a menu item. to select a menu item and then press . ●● Press ●● You can also perform the same operation by rotating to select the menu item, then pressing [MENU/SET]. Select a setting item and then confirm your selection. , then press [MENU/SET]. ●● Select a setting item with ●● You can also perform the same operation by rotating to select a setting item, then pressing [MENU/SET]. Close the menu. ●● Press [ ] several times.
3. Basic Operations - Menu Operation Methods Displaying Descriptions About Menu Items and Settings When you press a Fn button that has the [Display Information] function registered while a menu item or setting item is selected, the details of that menu will be displayed on the screen. ●● About Fn buttons ( 160 / Register Functions to the Fn Buttons) Grayed Out Menu Items Menu items that cannot be set are displayed grayed out.
3. Basic Operations - Menu Operation Methods [Reset] Return each of the following settings to the default setting: – Recording settings – Network settings (Settings of [LAN / Wi-Fi] and [Bluetooth], password when connected to the camera with the “LUMIX Tether” software.) – Setup and custom settings (Anything other than [LAN / Wi-Fi] and [Bluetooth].) [MENU/SET] [ ] [ ] Select [Reset] ■■When the menu screen does not display to the external device Press [Q.MENU], [Fn2], and [Fn4] at the same time.
4. Recording Videos - Recording Videos 4. Recording Videos Recording Videos It is possible to record video with a maximum resolution of 6K (5952×3968) on this camera. It also supports switching of the system frequency and 2 types of recording file format; MP4 and MOV. Recording Videos 1 Start recording. ●● Press the video rec. button A. ●● Release the video rec. button right after you press it. ●● During video recording, the front tally lamp B and rear tally lamp C light. B 2 Stop recording.
4. Recording Videos - Recording Videos Screen Displays While Video Recording The video recording time D and elapsed recording time E will be displayed. ●● The recording state indication F and card access indication G turn red while videos are being recorded. 10S 24m59s ●● When the remaining capacity of the battery or card gets low during video recording, the tally lamps blink at long intervals.
4. Recording Videos - Recording Videos [Exposure Mode] 1 Set the exposure mode. ●● [MENU/SET] [ ] [ ] P [Exposure Mode] The camera automatically sets the shutter speed and aperture value according to the subject’s brightness. ●● When wearing headphones, you can adjust the volume by rotating . You can set the aperture value and record. Set the aperture value.*1 ●● Rotate . ●● When wearing headphones, you can adjust the volume by rotating A value setting operations by pressing .
4. Recording Videos - Recording Videos ●● The brightness of the recording screen and of actual recorded images may differ. Check the images on the playback screen. ●● When using a lens with an aperture ring, set the position of the aperture ring to other than [A] to use the aperture value of the lens.
4. Recording Videos - Recording Settings For Video Recording Settings For Video This section describes the settings used when video recording. [System Frequency] This changes the system frequency of videos that are recorded and played back. The default setting is for the system frequency to be set to the TV broadcast system for the region where the camera was bought. [MENU/SET] [ ] [ ] Select [System Frequency] [59.94Hz (NTSC)] System frequency for regions using the NTSC broadcasting system [50.
4. Recording Videos - Recording Settings For Video [Rec Quality] Sets the image quality of videos to be recorded. The image qualities you can select depend on the [System Frequency] and [Rec. File Format] settings. The [Image Area of Video] you can select differs depending on the [Rec Quality] settings.
4. Recording Videos - Recording Settings For Video ■■[System Frequency]: [50.00Hz (PAL)] ●● YUV, Bit value, Image compression: – [10bit] recording quality: 4:2:0, 10-bit, Long GOP – [8bit] recording quality: 4:2:0, 8-bit, Long GOP ●● Audio format: AAC (2ch) A Recording frame rate B Bit rate C Video compression format (HEVC: H.265/HEVC, AVC: H.264/MPEG-4 AVC) [Rec Quality] [Image Area of Video] FULL S35 P/P Resolution (Aspect ratio) [4K/10bit/100M/50p] A / B / C 50.
4. Recording Videos - Recording Settings For Video [Rec. File Format]: [MOV] ■■[System Frequency]: [59.94Hz (NTSC)] ●● YUV, Bit value, Image compression: – [422/10-I] recording quality: 4:2:2, 10-bit, ALL-Intra – [422/10-L] recording quality: 4:2:2, 10-bit, Long GOP – [420/10-L] recording quality: 4:2:0, 10-bit, Long GOP – [420/8-L] recording quality: 4:2:0, 8-bit, Long GOP ●● Audio format: LPCM (2ch) A Recording frame rate B Bit rate C Video compression format (HEVC: H.265/HEVC, AVC: H.
4. Recording Videos - Recording Settings For Video [4K/60p/420/10-L] 59.94p / 200 Mbps / HEVC [4K/60p/420/8-L] 59.94p / 150 Mbps / AVC [4K/48p/420/10-L] 47.95p / 200 Mbps / HEVC [4K/30p/422/10-I] 29.97p / 400 Mbps / AVC 3840x2160 [4K/30p/422/10-L] (16:9) 29.97p / 150 Mbps / AVC [4K/30p/420/8-L] 29.97p / 100 Mbps / AVC [4K/24p/422/10-I] 23.98p / 400 Mbps / AVC [4K/24p/422/10-L] 23.98p / 150 Mbps / AVC [4K/24p/420/8-L] 23.98p / 100 Mbps / AVC [FHD/120p/420/10-L] 119.
4. Recording Videos - Recording Settings For Video ■■[System Frequency]: [50.00Hz (PAL)] ●● YUV, Bit value, Image compression: – [422/10-I] recording quality: 4:2:2, 10-bit, ALL-Intra – [422/10-L] recording quality: 4:2:2, 10-bit, Long GOP – [420/10-L] recording quality: 4:2:0, 10-bit, Long GOP – [420/8-L] recording quality: 4:2:0, 8-bit, Long GOP ●● Audio format: LPCM (2ch) A Recording frame rate B Bit rate C Video compression format (HEVC: H.265/HEVC, AVC: H.
4. Recording Videos - Recording Settings For Video [FHD/100p/420/10-L] 100.00p / 150 Mbps / HEVC [FHD/50p/422/10-I] 50.00p / 200 Mbps / AVC [FHD/50p/422/10-L] 50.00p / 100 Mbps / AVC [FHD/50p/420/8-L] 50.00p / 100 Mbps / AVC 1920x1080 [FHD/50i/422/10-I] (16:9) 50.00i / 100 Mbps / AVC [FHD/50i/422/10-L] 50.00i / 50 Mbps / AVC [FHD/25p/422/10-I] 25.00p / 200 Mbps / AVC [FHD/25p/422/10-L] 25.00p / 100 Mbps / AVC [FHD/25p/420/8-L] 25.
4. Recording Videos - Recording Settings For Video ■■[System Frequency]: [24.00Hz (CINEMA)] ●● YUV, Bit value, Image compression: – [422/10-I] recording quality: 4:2:2, 10-bit, ALL-Intra – [422/10-L] recording quality: 4:2:2, 10-bit, Long GOP – [420/10-L] recording quality: 4:2:0, 10-bit, Long GOP – [420/8-L] recording quality: 4:2:0, 8-bit, Long GOP ●● Audio format: LPCM (2ch) A Recording frame rate B Bit rate C Video compression format (HEVC: H.265/HEVC, AVC: H.
4. Recording Videos - Recording Settings For Video ●● In this document, videos are indicated as follows according to their resolution: – 6K (5952x3968) video: 6K video – 5.9K (5888x3312) video: 5.9K video – 5.4K (5376x3584) video: 5.
4. Recording Videos - Recording Settings For Video [Filtering] When the [Rec. File Format] is set to [MOV], you can specify items such as frame rate, number of pixels (resolution), and codec (YUV, Bit value, Image compression), and only display recording quality that meets those conditions. In the [Rec Quality] setting screen, press [Fn1]. Select an item with and press [MENU/SET].
4. Recording Videos - Recording Settings For Video [Image Area of Video] Set the image area during video recording. The angle of view differs depending on the image area. Narrowing the image area allows you to achieve a telescopic effect without image deterioration. [MENU/SET] [ ] [ [FULL] [S35mm] [PIXEL/PIXEL] ] Select [Image Area of Video] Recording is within the area suited to the image circle of a full-frame lens. Recording is within the area suited to the image circle of a Super 35 mm lens.
4. Recording Videos - Time Code Time Code When [Rec. File Format] is set to [MOV], the time code is automatically recorded during video recording. If [MP4], the time code is not recorded. Setting the Time Code Sets the recording, display, and output of the time code. 1 2 Set [Rec. File Format] to [MOV]. ●● [MENU/SET] [ ] [ ] [Rec. File Format] Select [Time Code].
4. Recording Videos - Time Code [Time Code Display] Displays the time code on the recording screen. [REC RUN]: Counts the time code only when recording videos. [FREE RUN]: Counts the time code also when video recording is stopped and when the [Count Up] camera is turned off.
4. Recording Videos - Time Code Preparations for Time Code Synchronization Synchronize the time code default value with an external device that supports time code signal input and output. When [Count Up] is set to [FREE RUN], you can synchronize the initial value of the time code with an external device. A C B A [TC IN/OUT] terminal B BNC cable (commercially available) C External devices 1 2 Set [Count Up] to [FREE RUN].
4. Recording Videos - Time Code Synchronize the Time Code of the External Device with That of the Camera (TC OUT) The initial time code value of the external device is synchronized according to the time code signal of the camera. 1 2 Prepare for time code synchronizing. ( Synchronization) 63 / Preparations for Time Code Set [TC Synchronization] to [TC OUT].
4. Recording Videos - Time Code Synchronize the Time Code of the Camera with That of the External Device (TC IN) The initial time code value of the camera is synchronized according to the time code signal of the external device. ●● In advance, change the [System Frequency] ( [Time Code Mode] ( 1 2 3 50 / [System Frequency]), [Rec Quality] ( 51 / [Rec Quality]), and 62 / [Time Code Mode]) to match the external device. Prepare for time code synchronizing.
4. Recording Videos - Genlock settings Genlock settings When using several units of this camera or recording in combination with other recording devices, input the external sync signal from the [GENLOCK IN] terminal to synchronize the cameras. The camera is compatible with BBS (Black Burst Sync) and tri-level sync.
4. Recording Videos - Genlock settings Compatible reference signal The compatible reference signal differs depending on the following camera settings. ●● [MENU/SET] [ ] [ ] [HDMI / SDI Connections] ●● [MENU/SET] [ ] [ ] [SDI Rec Output] [SDI Output] [SDI Output Resolution] (The items that can be set differs depending on the recording frame rate of the [Rec Quality]. ( 142 / Set the resolution during recording when output via SDI)) ■■[System Frequency]: [59.
4. Recording Videos - Genlock settings Horizontal phase adjustment Adjusts the horizontal phase. 1 2 Select [Horizontal Phase Adjustment]. ●● [MENU/SET] [ ] [ ] [Genlock] [Horizontal Phase Adjustment] Set the horizontal phase. ●● Rotate to adjust the value, then press [MENU/SET]. ●● It can be set with the range of -206 to +49.
5. Recording settings - Focus / Zoom 5. Recording settings Focus / Zoom Selecting the Focus Mode Select the focusing method ([Focus Mode]) to match subject movement. 1 Set the Focus Mode. ●● [MENU/SET] [ ] [ [AF]*1 [MF] ] [Focus Mode] Automatically adjusts the focus. Manually adjusts the focus. This is used when you want to fix the focus or do not want the AF to work. ( 79 / Record Using MF) *1 When recording video: Operates according to the settings of [Continuous AF].
5. Recording settings - Focus / Zoom Using AF Select the focus mode and the AF mode appropriate for the subject and scene. 1 2 Set the focus mode to [AF]. ●● [MENU/SET] [ ] [ ] [Focus Mode] Select [AF Mode]. ●● [MENU/SET] [ ] [ ] [AF] [AF Mode] ■■[AF-ON] The AF also works when you press a Fn button that has [AF-ON] registered.
5. Recording settings - Focus / Zoom Subjects and recording conditions that make focusing difficult with AF mode – Fast-moving subjects – Extremely bright subjects – Subjects without contrast – Subjects recorded through windows – Subjects near shiny objects – Subjects in very dark locations – When recording subjects both distant and near ●● You can change the operation of AF-ON so that AF prioritizes subjects close by.
5. Recording settings - Focus / Zoom Selecting the AF Mode Select the focusing method to match the position and number of subjects. 1 2 Select [AF Mode]. ●● [MENU/SET] [ ] ] [AF Mode] Select the AF mode. ●● Rotate .
5. Recording settings - Focus / Zoom [Human Detect AF]/[Human/Animal Detect AF] The camera detects a person’s face, eyes, and body (entire body, upper half of the body, or head) and adjusts the focus. With animal detection enabled, the camera will also detect animals, such as birds, canines (including wolves), and felines (including lions). When the camera detects a person’s face ( A / B ) or body or an animal’s body ( C )*1, an AF area is displayed. *1 When the animal detection is enabled.
5. Recording settings - Focus / Zoom ■■Move and Change the Size of the Yellow AF Area You can move the yellow AF area to the position of the white AF area and replace the white AF area with the yellow AF area. If moving to a position outside an AF area, then the [ ] AF area will be set. Display the AF mode selection screen. ●● [MENU/SET] Select [ ]/[ Press Rotate [ ] [ ] ] and then press [AF Mode] . to move the position of the AF area. to change the size of the AF area.
5. Recording settings - Focus / Zoom ■■Move the Position of the AF Area Display the AF mode selection screen. ●● [MENU/SET] Select [ [ ] ] and then press . Press [ ] [AF Mode] to move the position of the AF area. ●● To return the position back to the center, press [Fn1]. Press [MENU/SET]. [225-Area] The camera selects the most optimal AF area to focus from 225 areas. [Zone (Oval)] Within the 225 AF areas, a central oval zone can be focused.
5. Recording settings - Focus / Zoom [1-Area] Specify the point to be brought into focus. ■■Switching of Automatic Detection Automatic detection is now available in the [1-Area] AF modes. When a part of a human or animal enters the [1-Area] AF area, the automatic detection AF area is indicated in yellow. Eye detection works when a person’s face is inside the AF area. Display the AF mode selection screen. ●● [MENU/SET] Select [ [ ] ] and then press .
5. Recording settings - Focus / Zoom ■■Move and Change the Size of the AF Area Display the AF mode selection screen. ●● [MENU/SET] Select [ ]/[ ] ]/[ Press Rotate [ [ ] [AF Mode] ] and then press . to move the position of the AF area. to change the size of the AF area. ●● The first press of [Fn1] returns the AF area position to the center. The second press returns the size of the AF area to the default. Press [MENU/SET].
5. Recording settings - Focus / Zoom [AF Custom Setting(Video)] You can fine-adjust the focusing method for video recording using [Continuous AF]. [MENU/SET] [ ] [ ] Select [AF Custom Setting(Video)] [ON] Enables the following settings. [OFF] Disables the following settings. [AF Speed] [+] side: Focus moves at a faster speed. [–] side: Focus moves at a slower speed.
5. Recording settings - Focus / Zoom Record Using MF Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate AF. 1 2 3 Set the focus mode to [MF]. ●● [MENU/SET] [ ] [ ] [Focus Mode] [MF] Close the menu. ●● Press [ ]. Rotate the focus ring. ●● The MF Assist screen is displayed. ●● You can also perform the same operation by pressing the Fn button assigned with [AF Mode].
5. Recording settings - Focus / Zoom 4 5 Select the focus point. to select the focus point. ●● Press ●● To return the point to be brought into focus to the center, press [Fn1]. Adjust the focus. ●● Rotate the focus ring. ●● This will display the in-focus portion highlighted with color. (Focus Peaking) ●● A recording distance guideline is displayed. (MF Guide) (m) 10 5 3 2 1.5 1 0.5 0.
5. Recording settings - Focus / Zoom 7 8 Start recording. ●● Press the video rec. button fully. Stop recording. ●● Press the video rec. button again. ■■Operations on the MF Assist Screen Button operation Description of operation Moves the enlarged display position. Enlarges*1 / reduces the screen. First time: Returns the MF Assist position to the center. [Fn1] Second time: Returns the MF Assist magnification to the default setting.
5. Recording settings - Focus / Zoom Recording with Zoom Use the optical zoom of the lens to zoom to telephoto or wide-angle. By using [Image Area of Video], you can increase the telephoto effect without deteriorating the image quality. ●● For details about [Image Area of Video] ( 1 60 / [Image Area of Video]) Rotate the zoom ring. T : Telephoto W : Wide-angle T W ●● Rotating the zoom ring displays the focal length on the recording screen.
5. Recording settings - Metering / Exposure / ISO Sensitivity Metering / Exposure / ISO Sensitivity [Metering Mode] The type of optical measurement to measure brightness can be changed. [MENU/SET] [ ] [ ] (Multi-metering) (Center-weighted) Select [Metering Mode] Method in which the most suitable exposure is measured by judging the allocation of brightness on the whole screen. Method used to perform measuring which focuses on the center of the screen.
5. Recording settings - Metering / Exposure / ISO Sensitivity Exposure Compensation You can compensate the exposure when the correct exposure determined by the camera is too bright or too dark. You can adjust the exposure in 1/3 EV steps in a range of ±3 EV. 1 Press [Fn2]. ●● At default setting, [Exposure Comp.] is assigned to [Fn2]. ●● About Fn buttons ( 159 / Fn Buttons) ●● You can also set it from the menu screen. [MENU/SET] 2 3 [ ] [ ] Select [Exposure Comp.] Compensate the exposure.
5. Recording settings - Metering / Exposure / ISO Sensitivity Locking Focus and Exposure (AF/AE Lock) Lock the focus and exposure in advance to take pictures with the same focus and exposure settings while changing the composition. This is useful when you want to bring an edge of the screen into focus or there is a backlight, for example. 1 Register [AE LOCK], [AF LOCK], or [AF/AE LOCK] to the Fn button. ( Functions to the Fn Buttons) [AE LOCK] The exposure is locked. [AF LOCK] The focus is locked.
5. Recording settings - Metering / Exposure / ISO Sensitivity ISO Sensitivity You can set light sensitivity (ISO sensitivity). With the default settings, you can set 100 to 51200 in 1/3 EV increments. This camera supports Dual Native ISO which enables recording at high sensitivity with reduced noise by switching the base sensitivity. The base sensitivity can also be fixed as necessary. 1 Press [Fn4]. ●● At default setting, [Sensitivity] is assigned to [Fn4].
5. Recording settings - Metering / Exposure / ISO Sensitivity ■■Setting Items (ISO Sensitivity) The ISO sensitivity is automatically adjusted according to the brightness. [AUTO] Maximum [6400]*1 The ISO sensitivity is fixed at the selected value. ●● The available ISO sensitivity range changes according to the setting of [Dual Native 88 / [Dual Native ISO Setting]) ISO Setting] in the [Video] ([Image Quality]) menu.
5. Recording settings - Metering / Exposure / ISO Sensitivity [Dual Native ISO Setting] You can set whether to switch the base sensitivity automatically or to fix it. [MENU/SET] [ ] [ ] Select [Dual Native ISO Setting] The base sensitivity is automatically switched according to the brightness. ISO sensitivity that can be set: [AUTO] [AUTO] / [100] to [51200]. (When [Extended ISO] is set: [AUTO] / [50] to [204800].) Sets the base sensitivity for low sensitivity.
5. Recording settings - White Balance / Image Quality White Balance / Image Quality White Balance (WB) White balance (WB) is a function that corrects the color cast produced by the light illuminating the subject. It corrects the colors so that white objects appear in white to make the overall color closer to what is seen by the eye. Normally, you can use auto ([AWB], [AWBc] or [AWBw]) to obtain the optimal white balance.
5. Recording settings - White Balance / Image Quality ■■Setting Items (White Balance) [AWB] Auto [AWBc] Auto (Reduces the reddish hue under an incandescent light source) [AWBw] Auto (Leaves the reddish hue under an incandescent light source) Clear sky Cloudy sky Shade under a clear sky Incandescent light to Set mode 1 to 4 ( 91 / Registering the White Set) to Color temperatures 1 to 4 ( 91 / Color Temperature Setting) 1 [AWB] will work within this range.
5. Recording settings - White Balance / Image Quality ■■Registering the White Set Take pictures of a white object under the light source of the recording location to adjust the white balance until it appears white. Press [Fn5] and then select any value from [ ] to [ ]. ●● At default setting, [White Balance] is assigned to [Fn5]. – About Fn buttons ( 159 / Fn Buttons) ●● You can also set it from the [White Balance] of the [Video] ([Image Quality]) menu. Press .
5. Recording settings - White Balance / Image Quality Adjusting the White Balance You can adjust the coloring when the coloring you want is not produced by the set white balance. Press [Fn5]. ●● At default setting, [White Balance] is assigned to [Fn5]. – About Fn buttons ( 159 / Fn Buttons) ●● You can also set it from the [White Balance] of the [Video] ([Image Quality]) menu. Select the white balance and then press . ●● The adjustment screen is displayed. Adjust the coloring.
5. Recording settings - White Balance / Image Quality [Master Pedestal Level] You can adjust the black level, which serves as the reference for images. 1 2 Select [Master Pedestal Level]. ●● [MENU/SET] [ ] [ ] [Master Pedestal Level] Adjust master pedestal. ●● Rotate . ●● Set in the range between –15 and +15.
5. Recording settings - White Balance / Image Quality [Photo Style] You can select the finishing settings of images to suit your subjects and expression styles. The image quality can be adjusted for each Photo Style. [MENU/SET] [ ] [ ] Select [Photo Style] [Standard] [Vivid] [Natural] [Flat] The standard setting. A setting that produces a more vivid quality with higher saturation and contrast. A setting that produces a softer quality with lower contrast.
5. Recording settings - White Balance / Image Quality ●● The range of available ISO sensitivities is different when [Photo Style] is set to the following: ( 87 / Setting Items (ISO Sensitivity)) – [Cinelike D2], [Cinelike V2], [Like709], [V-Log], [Like2100(HLG)] The range of available ISO sensitivities is also different for [LOW] and [HIGH] in [Dual Native ISO Setting]. Reset the exposure if necessary when ISO sensitivity changes. ●● You can set the knee mode with [Like709].
5. Recording settings - White Balance / Image Quality ■■Settings Items (Image Quality Adjustment) [Contrast]*1 Adjusts the contrast in the image. [Highlight]*1 Adjusts the brightness of bright areas. [Shadow]*1 Adjusts the brightness of dark areas. [Saturation]*2 Adjusts the vividness of colors. [Color Tone]*3 Adjusts blue and yellow tints. Assuming that the reference point is red, this rotates the hue toward violet/ [Hue]*2 magenta or yellow/green to adjust the coloring of the entire image.
5. Recording settings - White Balance / Image Quality Registering Settings in My Photo Style Press to select the type of Photo Style. Adjust the image quality. ●● My Photo Style displays the types of Photo Style at the top of image quality adjustment. Select the base Photo Style. Press [Fn1]. (When [MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] is selected) Press to select [Save Current Setting] and then press [MENU/SET]. Press to select the registration destination number and then press [MENU/SET].
5. Recording settings - White Balance / Image Quality Recording While Controlling Overexposure (Knee) When [Photo Style] is set to [Like709], you can adjust the knee so that recording can be performed with minimal overexposure. 1 Set [Photo Style] to [Like709]. ●● [MENU/SET] [ ] [ ] [Photo Style] [Like709] Like709 2 3 Press [Q.MENU]. Select a knee setting. to select a setting item. ●● Press [AUTO] Adjusts the compression levels of high-luminance areas automatically.
5. Recording settings - White Balance / Image Quality [Filter Settings] This mode records with additional image effects (filters). 1 2 Set the [Filter Effect]. ●● [MENU/SET] [ ] [ ] [Filter Settings] [Filter Effect] [SET] Select the filter. to select, and then press [MENU/SET]. ●● Press ●● Press [Fn1] to switch the screen between normal display and guide display. The guide display shows the description of each filter.
5. Recording settings - White Balance / Image Quality Adjusting the Filter Effect You can adjust the filter effect. Select the filter. On the recording screen, press Rotate . to set. ●● To return to the recording screen, press [MENU/SET] again. ●● When the filter effect is adjusted, the filter icon on the recording screen is indicated with [ Filter ].
5. Recording settings - White Balance / Image Quality ●● White balance will be fixed to [AWB]. ●● The upper limit to ISO sensitivity is [6400]. ●● When [High Dynamic] is set, the lower limit of the ISO sensitivity is fixed to [400] and the higher limit to [6400]. The range of available ISO sensitivities is also different for [LOW] and [HIGH] in [Dual Native ISO Setting].
5. Recording settings - White Balance / Image Quality Setting the Color to Be Left ([One Point Color]) Set [Filter Effect] to [One Point Color]. Press Press to display the setting screen. to move the frame and select the color you want to leave. ●● To return the frame back to the center, press [Fn1]. Press [MENU/SET].
5. Recording settings - Audio Settings Audio Settings [Sound Rec Level Disp.] The sound recording level is displayed on the recording screen. [MENU/SET] [ ] [ ] Select [Sound Rec Level Disp.] Settings: [ON] / [OFF] ●● When [Sound Rec Level Limiter] is set to [OFF], [Sound Rec Level Disp.] is fixed to [ON]. [Mute Sound Input] This mutes audio input. [MENU/SET] [ ] [ ] Select [Mute Sound Input] Settings: [ON] / [OFF] ●● [ ] is displayed on the recording screen.
5. Recording settings - Audio Settings [Sound Rec Level Adj.] Manually adjust the sound recording level. Select [Sound Rec Level Adj.]. ●● [MENU/SET] Press [ ] [ ] [Sound Rec Level Adj.] to adjust the sound recording level and then press [MENU/SET]. ●● You can adjust the sound recording level within the range from [MUTE], [–18dB] to [+12dB] in steps of 1 dB. ●● Displayed dB values are approximate. ●● When set to [MUTE], [ ] is displayed in the recording screen.
5. Recording settings - Main Assist Functions Main Assist Functions This section describes the main assist functions that are convenient when recording. ●● The [Custom] ([Monitor / Display]) menu has display assist functions such as the center marker. ( 196 / [Custom] menu ([Monitor / Display])) [Image Stabilizer] Set the image stabilizer operation to match the recording situation. ●● When using a lens with an O.I.S. switch, set the switch on the lens to ON.
5. Recording settings - Main Assist Functions ●● When the following functions are being used, [E-Stabilization (Video)] is not available: – 6K video/5.9K video/5.4K video – [Variable Frame Rate] – [HDMI RAW Data Output] – [Live Cropping] [SS/Gain Operation] You can switch the units of shutter speed values and gain (sensitivity) values. [MENU/SET] [ ] [ [SEC/ISO] ] Select [SS/Gain Operation] Displays the shutter speed in seconds and the gain in ISO.
5. Recording settings - Main Assist Functions [Luminance Spot Meter] Specify any spot on the subject to measure the luminance over a small area. 1 2 Set [Luminance Spot Meter]. ●● [MENU/SET] [ ] [ ] [Luminance Spot Meter] [ON] Select the position where you want to measure the luminance. to select and then press [MENU/SET]. ●● Press ●● To return the position back to the center, press [Fn1]. A Luminance value ■■Measurement Range Measuring is possible in the range –7% to 109% (IRE).
5. Recording settings - Main Assist Functions [Zebra Pattern] Parts that are brighter than the benchmark value are displayed with stripes. You can also set the benchmark value and the breadth of the range so that the stripes are displayed on parts that are within the range of brightness you specify. [ZEBRA1] [ZEBRA2] [MENU/SET] [ ] [ ] [ZEBRA1+2] Select [Zebra Pattern] [ZEBRA1] Parts that are brighter than the benchmark value are displayed with [ZEBRA1] stripes.
5. Recording settings - Main Assist Functions [Frame Marker] A frame with the set aspect ratio is displayed on the recording screen. This allows you to see during recording the angle of view that will be achieved with trimming (cropping) in post-processing. [ ] [MENU/SET] [ON] [ ] Select [Frame Marker] Displays video grid lines on the recording screen. [OFF] ― Sets the aspect ratio of video grid lines. [Frame Aspect]: [2.39:1] / [2.35:1] / [2.00:1] / [1.
6. Special Video Recording - [Variable Frame Rate] 6. Special Video Recording [Variable Frame Rate] By recording using a frame rate that is different to the playback frame rate, you can record smooth slow motion video and fast motion video. Slow Motion Video (Overcrank Recording) Fast Motion Video (Undercrank Recording) 1 2 Set a number of frames that is higher than the recording frame rate of the [Rec Quality]. For example: When recording at 48 fps and set to a 24.
6. Special Video Recording - [Variable Frame Rate] 3 Select an [Image Area of Video] with which you can use [Variable Frame Rate]. ●● [MENU/SET] [ ] [ ] [Image Area of Video] ●● [Variable Frame Rate] is not available with the following combinations of [Rec Quality] and [Image Area of Video]. Change the [Image Area of Video] as necessary. [Rec Quality] [Image Area of Video] 4K video, C4K video [FULL] [FHD/60p/420/8-L] [PIXEL/PIXEL] [FHD/50p/420/8-L] 4 5 Set [Variable Frame Rate].
6. Special Video Recording - [Variable Frame Rate] Available Frame Rate Setting Ranges The frame rate you can set differs depending on the [Rec Quality] settings. [Rec Quality] Frame rate Anamorphic (4:3) video 2 fps to 50 fps*1 C4K video / 4K video 2 fps to 60 fps FHD video 2 fps to 180 fps*2 *1 When set to a 23.98p or 24.00p [Rec Quality], a frame rate exceeding 48 fps cannot be set. *2 When [Image Area of Video] is set to [PIXEL/PIXEL], it is not possible to set to a frame rate exceeding 60 fps.
6. Special Video Recording - High Frame Rate Video High Frame Rate Video [MOV] video with high frame rates can be recorded to cards. By converting it with the compatible software, it is possible to produce slow motion video. AF recording and audio recording, not possible with [Variable Frame Rate], also become possible. ■■Recording Qualities for High Frame Rate Video [Rec. File Format] [System Frequency] [Rec Quality] Recording frame rate [4K-A/48p/420/10-L] [C4K/48p/420/10-L] [4K/48p/420/10-L] [59.
6. Special Video Recording - [Focus Transition] [Focus Transition] Smoothly transitions the focus position from the current position to a position registered in advance. 1 2 Select [Focus Transition]. ●● [MENU/SET] [ ] [ ] [Focus Transition] Set the recording settings. [Start] Start recording. Registers the focus position. [Focus Pull Setting] ●● The setting screen for the focus position is displayed when you select either [1], [2], or [3].
6. Special Video Recording - [Focus Transition] 4 Start recording. ●● Press the video rec. button. ●● If you have enabled [Focus Transition Rec], Focus Transition will start when you start recording a video. 5 Start Focus Transition. to select [1], [2], or [3], and then press [MENU/SET]. ●● Press ●● When [Focus Transition Wait] is set, Focus Transition starts after the set time has elapsed. (m) 10 5 3 2 1.5 1 0.5 0.
6. Special Video Recording - [Focus Transition] ●● Maintain the same distance to the subject after setting the focus position. ●● The moving speed of focus varies depending on the lens being used. ●● While using [Focus Transition], it is not possible to focus on anything other than the registered focus position. ●● Any of the operations below will clear the focus position settings.
6. Special Video Recording - [Live Cropping] [Live Cropping] By cropping a part of the image from the image displayed in the live view, it is possible to record FHD video that incorporates panning and zooming with the camera staying in a fixed position. Pan Zoom in ●● When using [Live Cropping], it is recommended to fix the camera so it does not move. 1 2 Set [Rec. File Format]. ●● [MENU/SET] [ ] [ ] [Rec.
6. Special Video Recording - [Live Cropping] 3 Set the time for panning or zooming. ●● [MENU/SET] [ ] [ ] [Live Cropping] [40SEC] / [20SEC] ●● If you have selected a recording format or recording quality where Live Cropping recording is not available, the camera switches to a recording format or FHD video recording quality where recording is possible. 4 Set the cropping start frame. ●● Select the range to be cropped and press [MENU/SET]. A Cropping start frame 5 Set the cropping end frame.
6. Special Video Recording - [Live Cropping] 6 Start Live Cropping recording. ●● Press the video rec. button. ●● When the set operating time has elapsed, recording automatically ends. To end recording midway, press the video rec. button again. 7S 20S C Elapsed recording time D Set operating time ■■Operations for Setting the Cropping Frame Button operation Description of operation Moves the frame. Enlarges / reduces the frame. Start frame: Returns the frame position and size to the default settings.
6. Special Video Recording - Log Recording Log Recording Setting [Photo Style] to [V-Log] enables Log recording. Images finished with rich gradation can be created through post production processing. [MENU/SET] [ ] [ ] [Photo Style] Select [V-Log] ●● Post-production processing is enabled by utilizing LUT (Look-Up Table). You can download LUT data from the following support site: https://panasonic.jp/support/global/cs/dsc/download/index3.
6. Special Video Recording - Log Recording When [Photo Style] is set to [V-Log] Reflectance ratio (%) 0 18 90 IRE(%) 7.3 42 61 Stop ― 0.0 2.3 10 bit code value 128 433 602 12 bit code value 512 1732 2408 ●● When luminance is to be displayed by Stop units, this camera calculates IRE 42% to 0 Stop.
6. Special Video Recording - HDMI Output of RAW Video Data HDMI Output of RAW Video Data 12-bit RAW Video Data with a maximum resolution of 5.9K can be output via HDMI to a compatible external recorder. When [HDMI RAW Data Output] is turned [ON], the menu screen will stop being output via HDMI. Before turning [HDMI RAW Data Output] to [ON], prepare an environment where the menu screen can be displayed on a PC installed with “LUMIX Tether”, or an SDI monitor in advance. B A 3.5K(4:3)/S35mm 50.00p/29.
6. Special Video Recording - HDMI Output of RAW Video Data ●● Video cannot be recorded to cards while RAW Video Data is being output via HDMI. ●● When [System Frequency] is set to [24.00Hz (CINEMA)], RAW Video Data cannot be output via HDMI. ●● [Photo Style] is fixed to [V-Log], and Image quality cannot be adjusted. Outputting RAW Video Data via HDMI Preparation: Connect the camera and external recorder with a commercially available HDMI cable (HDMI output).
6. Special Video Recording - HDMI Output of RAW Video Data 3 Set the HDMI input on the external recorder. ●● When the connection is complete, images will be displayed on the screen of the external recorder. ●● When the menu screen cannot be displayed, you can set [HDMI RAW Data Output] to [OFF] with one of the following methods: – Pressing a Fn button registered with [HDMI RAW Data Output]. ( 160 / Register Functions to the Fn Buttons) – Pressing [MENU/SET], [Q.MENU], and [Fn3] at the same time.
6. Special Video Recording - HDMI Output of RAW Video Data ●● Bit value: 12-bit ●● Audio format: LPCM (2ch) ●● [Image Area of Video] is fixed to the image area according to the [Rec Quality] setting. ●● The following functions are not available: – [Filtering] and [add to list] in [Rec Quality] – [Rec Quality (My List)] ●● When the XLR Microphone Adaptor (DMW-XLR1: optional) is attached, [XLR Mic Adaptor Setting] can be set to [96kHz/24bit] or [48kHz/24bit].
6. Special Video Recording - HLG Videos HLG Videos Record videos with the wide dynamic range of the HLG format. You can record in very bright light where overexposure can occur or in dark areas where underexposure can occur, maintaining the rich yet subtle colors you can see with your naked eye. You can view the video that you record by outputting via HDMI/SDI to devices (TVs, etc.) that support the HLG format, or playing back directly on supporting devices.
6. Special Video Recording - HLG Videos ●● When the [Rec. File Format] has been set to [MOV], you can filter to show just the recording qualities where HLG video recording can be used. ( 59 / [Filtering]) ●● HLG images are shown dark on devices that do not support the HLG format. With [HDMI] / [SDI] in [HLG View Assist] of the [Custom] ([Monitor / Display]) menu, you can set the conversion method for images displayed for monitoring.
6. Special Video Recording - Anamorphic Recording Anamorphic Recording This camera can record video with a resolution of 4K-A (anamorphic (4:3) video) that is compatible with anamorphic recording with an aspect ratio of 4:3. 1 2 Set [Rec. File Format] to [MOV]. ●● [MENU/SET] [ ] [ ] [Rec. File Format] [MOV] Select a recording quality wherein you can record Anamorphic (4:3) video. ●● [MENU/SET] [ ] [ ] [Rec Quality] ●● Items available for recording Anamorphic (4:3) video are indicated as [ANAMOR].
6. Special Video Recording - Anamorphic Recording [Anamorphic Desqueeze Display] Display the desqueezed images suited to the magnification of the anamorphic lens. Using the [Frame Marker], it is also possible to impose on display the frame of the angle of view when cropping after de-squeeze editing. 1 Set [Anamorphic Desqueeze Display]. ●● [MENU/SET] [ ] [ ] [Anamorphic Desqueeze Display] Settings: [ ] (2.0x) / [ ] (1.8x) / [ ] (1.5x) / [ ] (1.33x) / [ ] (1.
6. Special Video Recording - [Synchro Scan] [Synchro Scan] Fine-adjust the shutter speed to reduce flickering and horizontal stripes. The shutter speed set in Synchro Scan is saved separately from the shutter speed used for normal recording. In the Synchro Scan setting screen you can call up the current shutter speed for normal recording and adjust it. 1 2 3 Set the exposure mode to [S] or [M]. ●● [MENU/SET] [ ] [ ] [Exposure Mode] Set [Synchro Scan].
6. Special Video Recording - [Loop Recording (video)] [Loop Recording (video)] Even when recording uses up the card’s free space, the camera continues the recording by deleting the oldest segment of the recorded data. 1 2 Set [Rec. File Format] to [MOV]. ●● [MENU/SET] [ ] [ ] [Rec. File Format] [MOV] Set [Loop Recording (video)]. ●● [MENU/SET] [ ] [ ] [Loop Recording (video)] ●● [ [ON] ] is displayed on the recording screen.
6. Special Video Recording - [Segmented File Recording] [Segmented File Recording] To avoid video loss due to unforeseen interruptions to the power supply, recorded video is divided every few minutes while MOV video is being recorded. ●● The divided videos are saved as one group image. 1 2 Set [Rec. File Format] to [MOV]. ●● [MENU/SET] [ ] [ ] [Rec. File Format] [MOV] Set [Segmented File Recording]. ●● [MENU/SET] [ ] [ ] [Segmented File Recording] [10MIN.] / [5MIN.] / [3MIN.] / [1 MIN.
6. Special Video Recording - List of Recording Qualities That Enable Special Videos to be Recorded List of Recording Qualities That Enable Special Videos to be Recorded VFR: Recording qualities that enable use of [Variable Frame Rate] HFR: Recording qualities for High Frame Rate video Live Crop: Recording qualities that enable use of [Live Cropping] HLG: Recording qualities with which you can record HLG video ANAMOR 4:3: Recording qualities for anamorphic recording with an aspect ratio of 4:3 [Rec.
6. Special Video Recording - List of Recording Qualities That Enable Special Videos to be Recorded [Rec. File Format]: [MOV] ■■[System Frequency]: [59.94Hz (NTSC)] [Rec Quality] VFR HFR [6K/24p/420/10-L] [5.9K/30p/420/10-L] [5.9K/24p/420/10-L] [5.
6. Special Video Recording - List of Recording Qualities That Enable Special Videos to be Recorded [FHD/60p/420/8-L] [FHD/60i/422/10-I] [FHD/60i/422/10-L] [FHD/48p/420/10-L] [FHD/30p/422/10-I] [FHD/30p/422/10-L] [FHD/30p/420/8-L] [FHD/24p/422/10-I] [FHD/24p/422/10-L] [FHD/24p/420/8-L] ■■[System Frequency]: [50.00Hz (PAL)] [Rec Quality] VFR HFR [5.9K/25p/420/10-L] [5.
6. Special Video Recording - List of Recording Qualities That Enable Special Videos to be Recorded [FHD/50i/422/10-L] [FHD/25p/422/10-I] [FHD/25p/422/10-L] [FHD/25p/420/8-L] ■■[System Frequency]: [24.00Hz (CINEMA)] [Rec Quality] VFR HFR [6K/24p/420/10-L] [5.
7. Output image - HDMI Output Settings 7. Output image In this chapter, image settings output to the external device during recording is explained. ●● The resolution of the image to be output via HDMI/SDI differs depending on the settings of [Rec Quality]. – When the image is not output ( 267 / External device) ●● HDMI output control differs between during recording and during playback.
7. Output image - HDMI Output Settings Settings for Down-Converting Make settings for the down-conversion of resolution and frame rate for HDMI output. [MENU/SET] [ ] [ ] [AUTO] [4K/30p] ([4K/25p]) [HDMI Rec Output] Select [Down Convert] Outputs by down-converting to match the connected device. Outputs by down-converting resolution to 4K and frame rate to either 29.97p or 25.00p. [1080p] Down-converts resolution to FHD (1080), and outputs as progressive.
7. Output image - HDMI Output Settings Image Quality When Outputting via HDMI Output is with the resolution and frame rate according to the combinations of the [Rec Quality] and [Down Convert] settings. ●● When [Down Convert] is set to [AUTO], the output matches the connected device. ●● Combinations marked with [―] in the table below cannot be selected.
7. Output image - HDMI Output Settings ■■[System Frequency]: [50.00Hz (PAL)] Resolution and recording frame rate of the [Rec Quality] [Down Convert] 5.9K/25.00p 5.4K/25.00p 4K-A/50.00p 4K-A/25.00p 4K/50.00p C4K/50.00p C4K/25.00p 4K/25.00p [4K/25p] 4K/25.00p 4K/25.00p 4K/25.00p 4K/25.00p [1080p] 1080/25.00p*2 1080/50.00p 1080/50.00p 1080/25.00p*2 [1080i] 1080/50.00i 1080/50.00i 1080/50.00i 1080/50.00i [OFF] 4K/25.00p 4K/50.00p C4K/50.00p C4K/25.
7. Output image - HDMI Output Settings Outputting Control Information to an External Recorder Recording start and stop control information is output to an external recorder connected by HDMI. [MENU/SET] [ ] [ ] [HDMI Rec Output] Select [HDMI Recording Control] Settings: [ON] / [OFF] ●● It can be set when [HDMI Time Code Output] is [ON]. ●● Control information is output when pressing the video rec. button, even if the video cannot be recorded (such as when there is no card inserted into the camera).
7. Output image - SDI output settings SDI output settings Set the resolution during recording when output via SDI Set the resolution of the image to be output via SDI. [MENU/SET] [ ] [ ] [SDI Rec Output] Select [SDI Output Resolution] Settings: [1080p] / [1080i] / [1080PsF] / [720p] ■■Settings Items ([SDI Output Resolution]) Output is with the resolution and frame rate according to the combinations of the [Rec Quality] and [SDI Output Resolution] settings.
7. Output image - SDI output settings [System Frequency]: [24.00Hz (CINEMA)] Recording frame rate of the [Rec Quality] [SDI Output Resolution] 48.00p 24.00p 1080p — 1080i — 1080PsF 1080/24.00PsF 720p — ●● This memorizes the setting value for each recording frame rate of [Rec Quality]. ●● When [System Frequency] is set to [24.00Hz (CINEMA)], it is fixed to [1080PsF]. ●● When set to a recording quality for high frame rate video, the frame rate is down-converted for output.
7. Output image - SDI output settings Output the enlarged display of MF assist via SDI Outputs the enlarged display of MF assist to an external device connected via SDI. [MENU/SET] [ ] [ ] [SDI Rec Output] Select [SDI MF Assist Output] Settings: [ON] / [OFF] ●● When you enlarge the display with MF assist on the camera while [SDI MF Assist Output] is set to [OFF], the camera information display will not be output via HDMI.
8. Connections with External Devices - External Microphones (Optional) 8. Connections with External Devices In this chapter, external devices connected to this unit are explained. ●● Some optional accessories may not be available in some countries.
8. Connections with External Devices - External Microphones (Optional) ■■Removing the Hot Shoe Cover Remove the hot shoe cover by pulling it in the direction of arrow while pressing it in the direction of arrow . Setting the Sound Pickup Range (DMW-MS2: Optional) When using the Stereo Shotgun Microphone (DMW-MS2: optional), you can set the microphone sound pickup range. Select [Special Mic.]. ●● [MENU/SET] [ ] [ ] [STEREO] [Special Mic.] Picks up sound over a wide area.
8. Connections with External Devices - XLR Microphone Adaptor (Optional) XLR Microphone Adaptor (Optional) By attaching an XLR Microphone Adaptor (DMW-XLR1: optional) to the camera, you can use a commercially available XLR microphone to enable the recording of superior-quality high-res/stereo audio. A B A Hot shoe B Commercially available XLR microphone Preparation: ●● Turn off the camera, and remove the hot shoe cover.
8. Connections with External Devices - XLR Microphone Adaptor (Optional) ●● While an XLR Microphone Adaptor is attached, [ ] is displayed on the screen. ●● When [XLR Mic Adaptor Setting] is set to other than [OFF], the following settings are fixed: – [Sound Rec Level Limiter]: [OFF] – [Wind Noise Canceller]: [OFF] – [Sound Output]: [Recorded Sound] ●● [Sound Rec Gain Level] and [Sound Rec Level Adj.] cannot be used when [XLR Mic Adaptor Setting] is set to other than [OFF].
8. Connections with External Devices - Headphones Headphones You can record videos while monitoring their sound by connecting commercially available headphones to the camera. A A Headphone terminal ●● Do not use the Headphone cables with the length of 3 m (9.8 feet) or more. ●● Excessive sound pressure from earphones and headphones can cause hearing loss. Switching the Sound Output Method [MENU/SET] [ ] [ ] Select [Sound Output] [REALTIME] Audio without time lag.
8. Connections with External Devices - Using a remote control unit Using a remote control unit You can control a part of the function remotely by connecting the remote control unit (commercially available) to the camera. It can be used in the following ways. (The operations that can be performed vary depending on the remote control unit used.
8. Connections with External Devices - Importing Images to a PC Importing Images to a PC After connecting to the PC, you can copy the recorded images by dragging files and folders on this camera to the PC. The camera can be connected to a PC running any of the following OSs which can detect mass storage devices. Supported OS Windows: Windows 10 Mac: macOS 10.13, 10.14, 10.15.3 to 10.15.7, 11.0 to 11.
8. Connections with External Devices - Importing Images to a PC ■■Folder Structure Inside Card LUMIX AD_LUMIX CAMSET DCIM 100XXXXX PXXX0001.MP4 A The camera’s setup information B Images C Folder number D MP4: MP4 videos MOV: MOV videos JPG: JPEG format pictures E File number ●● For the USB connection cable, use one that is a shielded product with a ferrite core compliant to USB Type C (USB3.1) that is less than 1.5 m (4.9 feet).
9. Playback - Playing Back Videos 9. Playback This chapter explains how to playback and delete videos. ●● Connect the camera to the external device and output the image. ( ●● You can set the output resolution during playback. ( 22 / Connecting the external monitor) 204 / [Output Resolution(Playback)]) ●● Images recorded on devices other than this one may not be played back correctly on this camera. Playing Back Videos 1 2 Display the playback screen. ●● Press [ ]. Select a video. .
9. Playback - Playing Back Videos 3 Playback the video. ●● Press . 00:05:50 00:08:30 C Elapsed playback time D Playback bar 4 Stop playback. ●● Press . ■■Operations During Video Playback Button operation Description of operation Plays / pauses. Stops. Performs fast-rewind playback. ●● If you press again, the fast-rewind speed increases. Performs frame-by-frame rewinding (while paused). Performs fast-forward playback. ●● If you press again, the fast-forward speed increases.
9. Playback - Playing Back Videos Switching the Card to Display Images are displayed separately by card slot. When you press [Q.MENU] during playback you can switch the card that will be displayed. ●● Use the Fn button registered with [Card Slot Change] to operate. In default settings, this is registered in [Q.MENU]. – About Fn buttons ( 159 / Fn Buttons) Press [Q.MENU]. Press to select [Card Slot 1] or [Card Slot 2] and then press [MENU/SET]. ●● The camera can playback videos in MP4 and MOV formats.
9. Playback - Switching the Display Mode Switching the Display Mode This switches to thumbnail display (Multi playback), which displays several images at the same time. Thumbnail Display 1 Switch to thumbnail display. ●● Rotate to the left. ●● The display is switched in the order of 12-image screen ●● Rotating 30-image screen. to the right returns to the previous display. 1/999 A Card slot 2 Select an image. to select an image and then press [MENU/SET].
9. Playback - Switching the Display Mode Group Images Images recorded using [Segmented File Recording] are handled as group images in the camera, and can be deleted and edited on a group basis. You can also delete and edit each image in a group individually. Playing the Images in a Group One by One Operations such as displaying thumbnails and deleting images are available with images in groups just as with normal playback. Select the group image in the playback state.
9. Playback - Deleting Images Deleting Images ●● Images cannot be restored once they have been deleted. Carefully confirm the images before deletion. ●● You can only delete the images in the card of the selected card slot. ●● If you delete a group image, all images in the group are deleted. [Delete Single] Press [ ] in playback state. Press to select [Delete Single] and then press [MENU/SET]. [Delete Multi] Press [ ] in playback state. Press 1 to select [Delete Multi] and then press [MENU/SET].
10. Camera Customization - Fn Buttons 10. Camera Customization This chapter describes the customization function with which you can configure the camera to your preferred settings. ●● Detailed settings for camera operations and screen display are available in the [Custom] menu. ( 192 / [Custom] menu) Fn Buttons You can register functions to the Fn (Function) buttons. Additionally, you can register other functions to [ ] and [Q.MENU] in the same way as with the Fn buttons.
10. Camera Customization - Fn Buttons Register Functions to the Fn Buttons 1 2 3 Select [Fn Button Set]. ●● [MENU/SET] [ ] [ ] [Fn Button Set] [Setting in REC mode] / [Setting in PLAY mode] Select the button. to select the button and then press [MENU/SET]. ●● Press ●● Selection is also possible by rotating . Find the function to register. ●● You can select by pressing to select the sub tab, pressing ●● Each press [Q.MENU] switches between tabs [1] and [2].
10. Camera Customization - Fn Buttons 4 Register the function. to select a function and then press [MENU/SET]. ●● Press ●● Selection is also possible by rotating . ●● Select items with [ ] by selecting the item again. ●● Depending on the button, some functions cannot be registered. ●● You can also press and hold the Fn button (2 sec.) to display the screen in Step 4. (This may not be displayed depending on the registered function and on the button type.
10. Camera Customization - Fn Buttons Setting Items ([Fn Button Set] / [Setting in REC mode]) ■■[1] tab [Image Quality] ●● [Exposure Mode] ( 48 / [Exposure Mode]) ●● [Aperture Value] ( 48 / [Exposure Mode]) ●● [Shutter Speed] ( 48 / [Exposure Mode]) ●● [Exposure Comp.
10. Camera Customization - Fn Buttons [Image Format] ●● [Rec. File Format] ( ●● [Rec Quality] ( 50 / [Rec. File Format]) 51 / [Rec Quality]) ●● [Rec Quality (My List)] ( 59 / [add to list]) ●● [Variable Frame Rate] ( 110 / [Variable Frame Rate]) ●● [Time Code Display] ( 62 / [Time Code Display]) ●● [HDMI RAW Data Output] ( 122 / HDMI Output of RAW Video Data) – The menu screen stops being output via HDMI when the [HDMI RAW Data Output] is set to [ON].
10.
10. Camera Customization - Fn Buttons Setting Items ([Fn Button Set] / [Setting in PLAY mode]) ■■[1] tab [Playback Mode] ●● [Anamorphic Desqueeze Display] ( 129 / [Anamorphic Desqueeze Display]) [Add/Delete Info.
10. Camera Customization - Fn Buttons Use the Fn Buttons During recording, pressing the Fn buttons enables usage of the functions registered in [Setting in REC mode], and during playback, it enables usage of the functions registered in [Setting in PLAY mode]. 1 2 Press the Fn button. Select a setting item. to select a setting item and then press [MENU/SET]. ●● Press ●● Selection is also possible by rotating . ●● Display and selection methods of a setting item differ depending on the menu item.
10. Camera Customization - Quick Menu Customization Quick Menu Customization You can change the items to display on the Quick menu and their order to suit your preferences. ●● For information about Quick menu operation methods ( 1 2 3 Select [Q.MENU Settings]. ●● [MENU/SET] [ ] [ ] [Q.MENU Settings] 39 / Quick Menu) [Item Customize (Video)] Select the item position ( to ). to select the position and then press [MENU/SET]. ●● Press Find the function to register.
10. Camera Customization - Quick Menu Customization 4 Register menu items. to select an item and then press [MENU/SET]. ●● Press ●● Selection is also possible by rotating . ●● Select items with [ ] by selecting the item again.
10. Camera Customization - Quick Menu Customization Menu Items That Can Be Registered ■■[1] tab [Image Quality] ●● [Exposure Mode] ( 48 / [Exposure Mode]) ●● [Aperture Value] ( 48 / [Exposure Mode]) ●● [Shutter Speed] ( 48 / [Exposure Mode]) ●● [Exposure Comp.
10.
10. Camera Customization - Custom Mode Custom Mode Menu settings that match your preferences can be registered in Custom mode. You can use registered settings by switching to [Custom Mode C1] until [Custom Mode C12] at the recording mode menu. Register in Custom Mode You can register the currently set information of the camera. At the time of purchase, the default settings of the [Creative Video Mode] menus are registered with all Custom modes. 1 2 3 Set menu settings of the state you wish to save.
10. Camera Customization - Custom Mode Custom Mode Detailed Settings You can create additional Custom mode sets, and how long to retain temporarily changed settings details. [MENU/SET] [ ] [ ] Select [Custom Mode Settings] [Limit No. of Custom Mode] Sets the number of custom modes that will be displayed in the recording mode menu. A maximum of 12 sets can be registered; 5 sets are available as default settings. Changes the Custom mode name. [Edit Title] A maximum of 22 characters can be entered.
10. Camera Customization - Custom Mode Using Custom Mode 1 Select Custom mode. ●● [MENU/SET] [ ] [ ] [Custom Mode C1] to [Custom Mode C12] ●● The selected Custom mode icon will be displayed on the recording screen. Changing Registered Details Registered settings do not change even if you change the camera settings temporarily with [Custom Mode C1] to [Custom Mode C12]. To change the registered details, overwrite them by using [Save to Custom Mode] in the [Setup] ([Setting]) menu.
10. Camera Customization - Custom Mode Calling Up Settings Call up registered Custom mode settings to the selected recording mode and overwrite the current settings with the called up settings. 1 2 3 Set to the recording mode to use. Select [Load Custom Mode]. ●● [MENU/SET] [ ] [ ] [Load Custom Mode] Select the Custom mode to call up. ●● Select the Custom mode and then press [MENU/SET].
10. Camera Customization - My Menu My Menu Register frequently-used menus in My Menu. A maximum of 23 items can be registered. ] to [ Registered menus can be called up from [ ]. Registration in My Menu 1 2 Select [Add]. ●● [MENU/SET] [ ] [ ] [Add] Register. ●● Select the menu to register and then press [MENU/SET]. Calling up My Menu Call up the menus registered in My Menu.
10. Camera Customization - My Menu Edit My Menu You can reorder the display order of My Menu, and delete unnecessary menus. [MENU/SET] [ ] Select [ ] [Add] [Sorting] Selects and registers the menus to be displayed in My Menu. Changes the order of My Menu. Select the menu to change, then set the destination. Deletes menus that are registered to My Menu. [Delete] [Delete Item]: Selects the menu, then deletes. [Delete All]: Deletes all menus registered in My Menu.
10. Camera Customization - [Save/Restore Camera Setting] [Save/Restore Camera Setting] Saves the camera’s settings information to the card. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. [MENU/SET] [ ] [ ] Select [Save/Restore Camera Setting] Saves the camera’s settings information to the card. ●● If saving new data, then select [New File], and if overwriting an existing file, select that existing file.
11. Menu Guide - List of Menu 11. Menu Guide This chapter provides a list of menus and describes them in detail. ●● For information about menu operation methods. ( 41 / Menu Operation Methods) ●● Refer to the “14.
11. Menu Guide - List of Menu [Focus] ( 186 / [Video] menu ([Focus])) ●● [Focus Mode] ●● [AF Mode] ●● [AF Custom Setting(Video)] ●● [Continuous AF] ●● [Focus Peaking] ●● [1-Area AF Moving Speed] [Audio] ( 188 / [Video] menu ([Audio])) ●● [Sound Rec Level Disp.] ●● [Mute Sound Input] ●● [Sound Rec Gain Level] ●● [Sound Rec Level Adj.] ●● [Sound Rec Level Limiter] ●● [Wind Noise Canceller] / [Wind Cut] ●● [Mic Socket] ●● [Special Mic.
11.
11.
11. Menu Guide - [Rec Mode] menu [Rec Mode] menu : Default settings [Rec Mode] [Creative Video Mode] / [Custom Mode C1] to [Custom Mode C12] This selects a recording mode. ( 173 / Using Custom Mode) [Video] menu [Video] menu ([Image Quality]) : Default settings [Exposure Mode] [P] / [A] / [S] / [M] Sets the exposure mode. ( 48 / [Exposure Mode]) [Exposure Comp.] [-3] to [+3] ( ± 0) This compensates the exposure.
11. Menu Guide - [Video] menu [Photo Style] [Standard] / [Vivid] / [Natural] / [Flat] / [Landscape] / [Portrait] / [Monochrome] / [L.Monochrome] / [L.Monochrome D] / [Cinelike D2] / [Cinelike V2] / [Like709] / [V-Log] / [Like2100(HLG)] / [MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] You can select the finishing settings of images to suit your subjects and expression styles. ( 94 / [Photo Style]) [Metering Mode] [ ]/[ ]/[ ]/[ ] You can switch the method of measurement for the brightness.
11. Menu Guide - [Video] menu [i.Dynamic Range] [AUTO] / [HIGH] / [STANDARD] / [LOW] / [OFF] Contrast and exposure are compensated when the brightness difference between the background and subject is great. ●● Compensation effect may not be achieved depending on the recording conditions. ●● When the following functions are being used, [i.
11. Menu Guide - [Video] menu [Video] menu ([Image Format]) : Default settings [Rec. File Format] [MP4] / [MOV] Sets the video recording file format. ( 50 / [Rec. File Format]) [Image Area of Video] [FULL] / [S35mm] / [PIXEL/PIXEL] Sets the image area during video recording. ( 60 / [Image Area of Video]) [Rec Quality] Sets the video recording image quality. ( 51 / [Rec Quality]) [Rec Quality (My List)] Calls up a recording quality registered in My List.
11. Menu Guide - [Video] menu [Genlock] [Genlock Input] [ON] / [Horizontal Phase Adjustment] [-206] to [+49] ( [±0]) [OFF] This synchronizes the image signal of the camera and external device. ( 66 / Genlock settings) [Luminance Level] [0-255] / [16-235] / [16-255] You can set the luminance range to suit the purpose of video recording.
11. Menu Guide - [Video] menu [Continuous AF] [MODE1] / [MODE2] / [OFF] You can select how to set the focus in AF when recording videos. ( 77 / [Continuous AF]) [Focus Peaking] [ON] / [OFF] [Focus Peaking Sensitivity] [SET] [Display Color] During MF operation, in-focus portions (portions on the screen with clear outlines) are highlighted with color.
11. Menu Guide - [Video] menu [Video] menu ([Audio]) : Default settings [Sound Rec Level Disp.] [ON] / [OFF] The sound recording level is displayed on the recording screen. ( 103 / [Sound Rec Level Disp.]) [Mute Sound Input] [ON] / [OFF] This mutes audio input. ( 103 / [Mute Sound Input]) [Sound Rec Gain Level] [STANDARD] / [LOW] This switches the gain of audio input. ( 103 / [Sound Rec Gain Level]) [Sound Rec Level Adj.
11. Menu Guide - [Video] menu [Wind Cut] [HIGH] / [STANDARD] / [LOW] / [OFF] This reduces wind noise when an external microphone is connected. ( 146 / Reduction of Wind Noise) [Mic Socket] [ ]/[ ]/[ ] Sets the [MIC] terminal input method that suits the device to be connected. ( 145 / External Microphones (Optional)) [Special Mic.] [STEREO] / [LENS AUTO] / [SHOTGUN] / [S.SHOTGUN] / [MANUAL] Sets the sound pickup range when using the Stereo Shotgun Microphone (DMW-MS2: optional).
11. Menu Guide - [Video] menu [Video] menu ([Others]) : Default settings [Image Stabilizer] [Operation Mode] [ ] / [OFF] [E-Stabilization (Video)] [ON] / [OFF] [Boost I.S. (Video)] [ON] / [OFF] Configures image stabilizer settings.
11. Menu Guide - [Video] menu [Time Stamp Rec.] [ON] / [OFF] Records the recorded date and time superimposed on the images. ●● You cannot delete recording dates after superimposing them. ●● When the following functions are being used, [Time Stamp Rec.] is not available: – 6K video / 5.9K video / 5.
11. Menu Guide - [Custom] menu [Custom] menu [Custom] menu ([Image Quality]) : Default settings [Photo Style Settings] [Vivid] / [Natural] / [Flat] / [Landscape] / [Portrait] / [L.Monochrome] / [Show/Hide Photo Style] [L.Monochrome D] / [Cinelike D2] / [Cinelike V2] / [Like709] / [V-Log] / [Like2100(HLG)] / [MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] Sets Photo Style items to be displayed on the menu.
11. Menu Guide - [Custom] menu [Exposure Offset Adjust.] [Multi Metering] [-1 EV] to [+1 EV] ( [±0 EV]) [Center Weighted] [-1 EV] to [+1 EV] ( [±0 EV]) [Spot] [-1 EV] to [+1 EV] ( [±0 EV]) [Highlight Weighted] [-1 EV] to [+1 EV] ( [±0 EV]) Adjusts the exposure level that is the standard correct exposure for each item of [Metering Mode]. Adds the adjustment value from this function to the exposure compensation value ( 84 / Exposure Compensation) when recording.
11. Menu Guide - [Custom] menu [MF Assist] [Focus Ring] [ON] / [OFF] [AF Mode] [ON] / [OFF] [MF Assist Display] [FULL] / [PIP] This sets the display method of MF Assist (enlarged screen). [Focus Ring]: The screen is enlarged by focusing with the lens. [AF Mode]: The screen is enlarged by pressing a Fn button that has [AF Mode] registered. ( 160 / Register Functions to the Fn Buttons) [MF Assist Display]: Sets the display method (full screen mode/windowed mode) of MF Assist (enlarged screen).
11. Menu Guide - [Custom] menu [Custom] menu ([Operation]) : Default settings [Q.MENU Settings] [Layout Style] [MODE1] / [MODE2] [Item Customize (Video)] Customizes the Quick menu. ( 170 / Quick Menu Detailed Settings) [Lock Switch Setting] [ ] (Playback) button / [Q.MENU] button [ ] (Delete) button / [ / / ] (Cancel) button Cursor buttons / [MENU/SET] button / Control dial / Video rec.
11. Menu Guide - [Custom] menu [Fn Button Set] [Setting in REC mode] [Setting in PLAY mode] Registers a function to the Fn button. ( 160 / Register Functions to the Fn Buttons) [Video Rec. Button] [ON] / [OFF] Enables/disables the video rec. button. [Custom] menu ([Monitor / Display]) : Default settings [Histogram] [ON] / [OFF] This displays the histogram. Turning this [ON] displays the histogram transition screen. Press to set the position.
11. Menu Guide - [Custom] menu [Level Gauge] [ON] / [OFF] Displays the level gauge which is useful in correcting camera tilt. A Horizontal B Vertical C Green (no tilt) ●● Even after correcting the tilt, there may still be an error of approx. ±1°. ●● When the camera is tilted significantly upwards or downwards, the level gauge may not be displayed correctly. ●● You can adjust the level gauge and reset the adjusted values in [Level Gauge Adjust.] in the [Setup] ([Monitor / Display]) menu.
11. Menu Guide - [Custom] menu [V-Log View Assist] [Read LUT File] [LUT Select] [LUT View Assist (HDMI)] [ON] / [OFF] [LUT View Assist (SDI)] [ON] / [OFF] You can output images with LUT data applied via HDMI/SDI. ( 121 / [V-Log View Assist]) [HLG View Assist] [HDMI] [AUTO] / [MODE1] / [MODE2] / [OFF] [SDI] [MODE1] / [MODE2] / [OFF] At recording or playback of HLG video, this outputs images with converted color gamut and brightness over HDMI/SDI.
11. Menu Guide - [Custom] menu [Zebra Pattern] [ZEBRA1] / [ZEBRA2] / [ZEBRA1+2] / [OFF] [Zebra 1] [SET] [Zebra 2] Parts that are brighter than the benchmark value are displayed with stripes. ( 108 / [Zebra Pattern]) [Color Bars] [SMPTE] / [EBU] / [ARIB] The color bars are displayed on the recording screen. ( 109 / Color bars / Test Tone) [Red REC Frame Indicator] [ON] / [OFF] A red frame is displayed on the recording screen that indicates that video is being recorded.
11. Menu Guide - [Custom] menu [SDI Rec Output] [SDI Output Resolution] [1080p] / [1080i] / [1080PsF] / [720p] [SDI Recording Control] [ON] / [Sound Output (SDI)] [OFF] [ON] / [OFF] [0dB] / [-6dB] / [-8dB] [SDI Sound Output Gain Adj.] * Default setting specifications vary depending on the country or area where the camera was purchased. [SDI MF Assist Output] Sets the SDI output during recording. ( [ON] / [OFF] 142 / SDI output settings) ●● When [System Frequency] is set to [24.
11. Menu Guide - [Custom] menu [Custom] menu ([Lens / Others]) : Default settings [Lens Focus Resume] [ON] / [OFF] The camera saves the focus position when you turn it off.
11. Menu Guide - [Setup] menu [Setup] menu [Setup] menu ([Card/File]) : Default settings [Card Format] [Card Slot 1] / [Card Slot 2] Formats the card (initialization). ( 27 / Formatting Cards (Initialization)) [Double Card Slot Function] [Recording Method] [ ]/[ ]/[ This sets the way recording to the card slots 1 and 2 is performed.
11. Menu Guide - [Setup] menu [Setup] menu ([Monitor / Display]) [Level Gauge Adjust.] [Adjust.] Hold the camera in a horizontal position, and press [MENU/SET]. The level gauge will be adjusted. [Level Gauge Value Reset] Restores the default level gauge setting. [Setup] menu ([IN/OUT]) : Default settings [Headphone Volume] [0] to [LEVEL15] ( [LEVEL3]) Adjusts the volume when headphones are connected.
11. Menu Guide - [Setup] menu [USB Mode] [ ] [PC(Storage)] / [ ] [PC(Tether)] This sets the communication method to be used when the USB connection cable is connected. [ ] [PC(Storage)]: Select this setting to export images to a connected PC. ( [ 151 / Importing Images to a PC) ] [PC(Tether)]: Select this setting to control the camera from a PC installed with “LUMIX Tether”. ( 216 / Tethered Recording) [HDMI / SDI Connections] [SDI Output] [ON] / [OFF] This outputs via SDI.
11. Menu Guide - [Setup] menu [Info Display (HDMI/SDI)] [AUTO] / [HDMI] / [SDI] / [OFF] This sets the output destination of the recording information and menu screen. ( 34 / Information Display (HDMI/SDI)) [Power/Network Indicator] [ON] / [OFF] This will light up the status indicator and [NETWORK] connection lamp. [Card Access Light] [ON] / [OFF] The card access lamp will light up when the card is being accessed.
11. Menu Guide - [Setup] menu [Save/Restore Camera Setting] [Save] / [Load] / [Delete] / [Keep Settings While Format] Saves the camera’s settings information to the card. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. ( 177 / [Save/Restore Camera Setting]) [Reset] Returns the camera to its default settings. ( 45 / [Reset]) [Setup] menu ([Others]) [Clock Set] Sets the date and time. ( 30 / Clock Set) [Time Zone] Sets the time zone.
11. Menu Guide - [Setup] menu [Language] This set the language displayed on the screen. ●● If you set a different language by mistake, select [ ] from the menu icons to set the desired language. [Firmware Version] [Firmware Update] / [Software info] You can check the firmware versions of the camera and lens. In addition, you can update the firmware, and display information about the camera software. [Firmware Update]: Updates firmware. 6 / Firmware of Your Camera/Lens) 1 Download the firmware.
11. Menu Guide - [Playback] menu [Playback] menu How to Select an Image(s) in the [Playback] menu Follow the steps below when the image selection screen is displayed. ●● Images are displayed separately by card slot. To switch the card to display, press [Q.MENU] and select the card slot. ●● You can only select/edit images on one card at a time. ■■When [Single] has been selected Press to select the image. Set Press [MENU/SET].
11. Menu Guide - [Playback] menu [Playback] menu ([Playback Mode]) : Default settings [Anamorphic Desqueeze Display] [ ]/[ ]/[ ]/[ ]/[ ]/ [OFF] This displays the de-squeezed images suited to the magnification of the anamorphic lens. ( 129 / [Anamorphic Desqueeze Display]) ●● This is linked with [Anamorphic Desqueeze Display] of the [Custom] ([Monitor / Display]) menu. [Playback] menu ([Add/Delete Info.
11. Menu Guide - [Playback] menu [Playback] menu ([Edit Image]) : Default settings [Copy] [Copy Direction] [ ]/[ ] [Select Copy] / [Copy All in Folder] / [Copy All in Card] You can copy the images in one of the cards to the other card. ●● Copied images will be saved in a new folder. [Select Copy]: Copies selected images. 1 Select the folder containing the images to copy. 2 Select the images. ( 3 Press [Fn1] to execute.
11. Menu Guide - [Playback] menu [Playback] menu ([Others]) [Delete All Images] [Delete All] / [Delete All Non-rating] Deletes all images in a card. [Delete All]: Deletes all images in a card. [Delete All Non-rating]: Deletes all images except those with a rating set. ●● Images cannot be restored once they have been deleted. Carefully confirm the images before deletion. ●● Depending on the number of images to be deleted, it may take some time to delete them.
11. Menu Guide - Entering Characters Entering Characters Follow the steps below when the character entry screen is displayed. 1 Enter characters. to select characters and then press [MENU/SET] until the character to enter is displayed. (Repeat this) ●● Press ●● To repeatedly enter the same character, rotate to the right to move the entry position cursor.
12. Remote Operations - About Remote Operation 12. Remote Operations This chapter explains the remote operation of the camera. About Remote Operation Connect the camera to a PC or smartphone with a USB connection cable*1, LAN cable, or Wi-Fi / Bluetooth*2. *1 Only when connecting to a PC. *2 Bluetooth connection can be used only when connecting to a smartphone. Remote Operations from a PC You can record remotely using the software “LUMIX Tether”.
12. Remote Operations - About Remote Operation ■■Checking operation when connected to a network External monitor display : The Wi-Fi function is set to on, or there is a connection. : The Bluetooth function is set to on, or there is a connection. : Connected with a LAN cable. [NETWORK] connection lamp (blue) Lit: Connected with a LAN cable. When Wi-Fi/Bluetooth function is ON or connected. Blinking: When sending Tether recorded images to a PC from a camera.
12. Remote Operations - About Remote Operation ■■Fn Button Assigned with [LAN / Wi-Fi] You can perform the following operations by pressing the Fn button assigned with [LAN / Wi-Fi] during network connection. ●● About Fn buttons ( 160 / Register Functions to the Fn Buttons) [Terminate the Connection] [Change the Destination] [Register the Current Destination to Favorite] [Network Address Display (LAN)] [Network Address Display (Wi-Fi)] Terminates connection.
12. Remote Operations - Tethered Recording Tethered Recording If you install the “LUMIX Tether” camera control software on your PC, you can connect the camera to the PC and then control the camera from the PC and record while checking the live view on the PC screen (tethered recording). In addition, you can output via HDMI/SDI to an external monitor or TV etc. during tethered recording. Installing “LUMIX Tether” This software is for controlling the camera from a PC.
12. Remote Operations - Tethered Recording Operating the Camera from a PC Connect the camera and PC with a USB connection cable, LAN cable or Wi-Fi. ●● When connecting the camera directly to a PC with a USB connection cable or LAN cable, you can connect to “LUMIX Tether” with the default setting. Proceed to step 2. (Operate from step 1 if you change the default setting of [LAN / Wi-Fi] or [USB Mode] in the [Setup] ([IN/OUT]) menu.
12. Remote Operations - Tethered Recording Preparation: ●● Turn on the camera and PC. ●● Install “LUMIX Tether” on PC. 1 (When connecting with a USB connection cable) Set [USB Mode] to [PC(Tether)]. ●● [MENU/SET] [ ] [ ] [USB Mode] [PC(Tether)] (When connecting with a LAN cable) Set the camera to DHCP server before setting it to a wired LAN connection setting.
12. Remote Operations - Tethered Recording Terminating the Network Connection To terminate the network connection between the camera and PC, follow the steps below. On the PC, close the “LUMIX Tether”. Terminate the network connection. ●● [MENU/SET] [ ] [ ] [LAN / Wi-Fi] [LAN / Wi-Fi Function] [Yes] ●● You can also perform the same operation by pressing the Fn button assigned with [LAN / Wi-Fi].
12. Remote Operations - Tethered Recording Operating multiple cameras You can operate multiple cameras remotely using “LUMIX Tether”. The connecting method differs depends on whether you set the camera to a setting for DHCP server or DHCP client to connect. A A A A B C A LAN cable (commercially available) B Router (commercially available) C PC (commercially available) Example: When the DHCP server is within the LAN and the camera is set to DHCP client to connect. 1 Set the camera to a DHCP client.
12. Remote Operations - Tethered Recording Tether Connection Mode You can set the camera to tether connection mode by operating the camera remotely from “LUMIX Tether”. If you set the camera to tether connection mode when it is not recording, it enters a connection standby state for LUMIX Tether while maintaining the connection between the camera and PC, and it can quickly return to a state where remote shooting is possible. ●● The status indicator lights up (orange) during tether connection mode.
12. Remote Operations - Connecting to a Smartphone Connecting to a Smartphone Use the smartphone app “Panasonic LUMIX Sync” (hereafter “LUMIX Sync”) for remote recording and image transfers. Flow of connecting a smartphone ●● When performing connection setting, output the camera menu screen via HDMI/SDI to an external monitor etc. ( Connecting the external monitor) 1 2 Install “LUMIX Sync” on your smartphone. ( 223 / Installing “LUMIX Sync”) Connect to a smartphone.
12. Remote Operations - Connecting to a Smartphone Installing “LUMIX Sync” “LUMIX Sync” is an application for smartphones provided by Panasonic. Supported OS Android™: Android 7 or higher iOS: iOS 12 or higher 1 2 3 4 Connect the smartphone to a network. (Android) Select “Google Play™ Store”. (iOS) Select “App Store”. Enter “Panasonic LUMIX Sync” or “LUMIX” into the search box. Select and install the “Panasonic LUMIX Sync” . ●● Use the latest version.
12. Remote Operations - Connecting to a Smartphone Connecting to a Smartphone (Bluetooth Connection) Follow a simple connection setup procedure (pairing) to connect to a smartphone that supports Bluetooth Low Energy. When pairing is set up, the Wi-Fi connection will be established automatically by just operating “LUMIX Sync”. ●● For the first-time connection, pairing settings are required.
12. Remote Operations - Connecting to a Smartphone Operating the camera in accordance with the smartphone guide. 3 4 Set the camera to Bluetooth pairing standby state. ●● [MENU/SET] [ ] [ ] [Bluetooth] [Bluetooth] [SET] [Pairing] ●● The camera enters pairing standby state and the device name A is displayed. On the smartphone, select the camera’s device name. ●● (iOS devices) When a message to confirm the change of destination is displayed, select [Join].
12. Remote Operations - Connecting to a Smartphone ●● The paired smartphone is registered as a paired device. ●● During Bluetooth connection, [ ] is displayed in the recording screen. When the Bluetooth function is enabled, but a connection is not established with the smartphone, [ ] appears translucent. ●● Up to 16 smartphones can be registered. If you try to register more than 16 smartphones, the registration information will be deleted from the oldest first.
12. Remote Operations - Connecting to a Smartphone Connecting to a Paired Smartphone Connect paired smartphones using the following procedure. Enable the Bluetooth function of the camera. ●● [MENU/SET] [ ] [ ] [Bluetooth] [Bluetooth] [ON] On the smartphone, start up “LUMIX Sync”. ●● If a message is displayed indicating that the smartphone is searching for cameras, close the message. Select [ ]. Select [Bluetooth Setup]. Turn Bluetooth ON.
12. Remote Operations - Connecting to a Smartphone Canceling Pairing Cancel the pairing setting of the camera. ●● [MENU/SET] [ ] [ ] [Bluetooth] [Bluetooth] [SET] [Delete] Select the smartphone for which to cancel the pairing. ●● Also cancel the pairing setting on the smartphone. ●● When [Reset] in the [Setup] ([Setting]) menu is used to reset the network settings, the information for registered devices is deleted.
12. Remote Operations - Connecting to a Smartphone 4 5 On the smartphone, start up “LUMIX Sync”. (At the first connection) Confirm the device name displayed on the screen of the output destination and then select [Yes]. ●● When a device different than the one you want to connect to is displayed, the camera will automatically connect to that device if you select [Yes].
12. Remote Operations - Connecting to a Smartphone Using Password Authentication to Connect You can enhance Wi-Fi connection security by using password authentication through either QR code or manual input. ■■Scanning QR code to connect Set [Wi-Fi Password] on the camera to [ON]. ●● [MENU/SET] [ ] [ ] [LAN / Wi-Fi] [LAN / Wi-Fi Setup] [ ] [LAN / Wi-Fi] [LAN / Wi-Fi Function] [Wi-Fi Password] [ON] Display the QR code ( A ).
12. Remote Operations - Connecting to a Smartphone ■■Manually entering a password to connect Display the screen in Step of “Scanning QR code to connect”. ( 230 / Scanning QR code to connect) In the setting menu of the smartphone, turn the Wi-Fi function ON. On the Wi-Fi setup screen, select the SSID B displayed on the screen of the output destination. (At the first connection) Enter the password B displayed on the screen of the output destination. On the smartphone, start up “LUMIX Sync”.
12. Remote Operations - Connecting to a Smartphone Connection Methods Other Than the Default Settings When connecting with [Via Network], or [WPS Connection] in [Direct], follow the steps below: Display the connection method setting screen for the camera. ●● [MENU/SET] Smartphone] [ ] [ ] [LAN / Wi-Fi] [LAN / Wi-Fi Function] [New Connection] [Control With [Wi-Fi] Press [Fn1]. ■■Connecting via network 1 Select [Via Network] and then press [MENU/SET].
12. Remote Operations - Connecting to a Smartphone Connecting to a Smartphone (Wired LAN connection) Connect the camera to the smartphone by connecting it to a wireless access point to which the smartphone is connected with a LAN cable. Preparation: ●● Connect a smartphone to a wireless access point. 1 Set the camera to a DHCP client.
12. Remote Operations - Connecting to a Smartphone Terminating the Wired LAN Connection To end the connection between the camera and smartphone, follow the steps below. Set the camera to recording mode. Terminate the wired LAN connection. ●● [MENU/SET] [ ] [ ] [LAN / Wi-Fi] [LAN / Wi-Fi Function] [Yes] ●● You can also perform the same operation by pressing the Fn button assigned with [LAN / Wi-Fi]. ( Assigned with [LAN / Wi-Fi]) On the smartphone, close the “LUMIX Sync”.
12. Remote Operations - Operating the Camera with a Smartphone Operating the Camera with a Smartphone This explains the functions for operating the camera from a smartphone. Functions described in this document with the ) symbol require a Bluetooth connection by a smartphone that supports Bluetooth Low Energy. ( Getting started ●● Connect the camera to a smartphone. ( 222 / Connecting to a Smartphone) ●● On the smartphone, start up “LUMIX Sync”.
12. Remote Operations - Operating the Camera with a Smartphone [Remote shooting] You can use the smartphone to record from a remote location while viewing the live view images from the camera. 1 Select [ ] ([Remote shooting]) in the home screen. ●● (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. 2 Start recording. A Starts / ends the video recording ●● The recorded image is saved on the camera.
12. Remote Operations - Operating the Camera with a Smartphone [Import images] Transfer an image stored on the card to the smartphone. 1 Select [ ] ([Import images]) in the home screen. ●● (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. 2 Select the image to transfer. ●● You can switch the card displayed by touching A . 3 Transfer the image. ●● Select [ ]. ●● If the image is a video, you can play it back by touching [ ] at the center of the screen.
12. Remote Operations - Operating the Camera with a Smartphone [Location Logging] The smartphone sends its location information to the camera via Bluetooth, and the camera performs recording while writing the acquired location information. Preparation: ●● Enable the GPS function on the smartphone. 1 Enable [Location Logging] on the camera.
12. Remote Operations - Operating the Camera with a Smartphone [Remote Wakeup] Even when the camera is turned off, the smartphone can be used to start the camera and record images, or check the recorded images. Preparation: Enable [Remote Wakeup] on the camera. ●● [MENU/SET] [ ] [ ] [Bluetooth] [Remote Wakeup] [ON] ●● [Remote Wakeup] is not available when connected with a LAN cable.
12. Remote Operations - Operating the Camera with a Smartphone [Auto Clock Set] Synchronize the clock and the time zone setting of the camera with those of a smartphone. 1 Enable [Auto Clock Set] on the camera. ●● [MENU/SET] [ ] [ ] [Bluetooth] [Auto Clock Set] [ON] ●● [Auto Clock Set] is not available when connected with a LAN cable. [Camera settings copy] This saves the camera’s settings information to the smartphone.
12. Remote Operations - Wi-Fi Connections Wi-Fi Connections ●● When [Wi-Fi] has been selected in [New Connection] under [LAN / Wi-Fi Function] from [LAN / Wi-Fi] of the [Setup] ([IN/ OUT]) menu, select the connection method from either [Via Network] or [Direct] to connect. On the other hand, when you use [Select destination from History(Wi-Fi)] or [Select destination from Favorite(Wi-Fi)], the camera connects to the selected device with the previously-used settings.
12. Remote Operations - Wi-Fi Connections ■■[WPS (Push-Button)] Press the WPS button on the wireless access point to set up a connection. Press the wireless access point WPS button until it switches to WPS mode. Example) ■■[WPS (PIN code)] Enter a PIN code into the wireless access point to set up a connection. Select the wireless access point you are connecting to. Enter the PIN code displayed on the screen of the output destination into the wireless access point. Press [MENU/SET] on the camera.
12. Remote Operations - Wi-Fi Connections Connecting by Manual Input ●● Check the SSID, network authentication, encryption, and encryption key of the wireless access point you are using. In the screen in Step of “[From List]”, select [Manual Input]. Enter the SSID of the wireless access point you are connecting to, and then select [Set]. ●● For information on how to enter characters ( 212 / Entering Characters) Select the network authentication.
12. Remote Operations - Wi-Fi Connections [Direct] Directly connect the camera and the external device. 1 Select the method for connecting with the external device. [WPS (Push-Button)] Press the WPS button on the external device to connect. [WPS Connection] ●● On the camera, press [Fn1] to extend the connection wait time. [WPS (PIN code)] Enter the PIN code into the camera, and connect. Search for the camera on the external device to connect.
12. Remote Operations - Wi-Fi Connections Connect to Wi-Fi Using Previously Saved Settings Use the Wi-Fi connection history to connect using the same settings as previously. 1 Display the Wi-Fi connection history. ●● [MENU/SET] [ ] [ ] [LAN / Wi-Fi] [LAN / Wi-Fi Function] [Select destination from History(Wi-Fi)] / [Select destination from Favorite(Wi-Fi)] 2 Select the History item to connect to. ●● Press [Fn1] to confirm details of the connection history.
12. Remote Operations - Wi-Fi Connections Editing Items Registered in Favorite Display items registered to Favorite. ●● [MENU/SET] [ ] [ ] [LAN / Wi-Fi] [LAN / Wi-Fi Function] Select the History item to edit in Favorite and then press . [Remove from Favorite] [Change the Order in Favorite] [Select destination from Favorite(Wi-Fi)] ― Specify the destination location of the desired item to change the display order. [Change the Registered Enter characters to change the registered name.
12. Remote Operations - [LAN / Wi-Fi Setup] menu [LAN / Wi-Fi Setup] menu This configures the settings required for the wired LAN / Wi-Fi function. The settings cannot be changed when connected to wired LAN / Wi-Fi. 1 Displaying the [LAN / Wi-Fi Setup] menu. ●● [MENU/SET] [ ] [ ] [LAN / Wi-Fi] [LAN / Wi-Fi Setup] ●● Cannot be set during connection via USB. Set the IP address for wired LAN connection.
12. Remote Operations - [LAN / Wi-Fi Setup] menu To prevent incorrect operation and use of the wired LAN / Wi-Fi function by a third party and to protect personal information in the camera and included with images, protect the wired LAN / Wi-Fi function with a password. [Setup]: Enter any 4-digit numbers as the password. ●● For information on how to enter characters ( [LAN / Wi-Fi Function Lock] 212 / Entering Characters) [Cancel]: Cancel the password.
13. Streaming Function 13. Streaming Function Live stream the camera’s images and audio (AAC) over the internet. ●● This camera supports RTP/RTSP*1. *1 Communication protocol for streaming E B B A C D A [LAN] terminal B LAN cable (commercially available) C Router (commercially available) D PC E Video sharing website Preparation: ●● Install an RTP/RTSP compatible streaming software to the PC. 1 Set the [IP Address Setting (LAN)] to the same network as the PC.
13. Streaming Function ●● While using the streaming function, you can connect to “LUMIX Tether” via a LAN cable by just starting up “LUMIX Tether” without operating the camera. ( 216 / Tethered Recording) ●● When you press the video rec.
13. Streaming Function ■■[Streaming Quality] A Frame rate B Bit rate [System Frequency]: [59.94Hz (NTSC)] [Streaming Quality] Video compression format Resolution 59.94p / 50 Mbps H.265/4K/50M/60p*1 H.265/4K/25M/60p*1 3840x2160 H.265/4K/25M/30p H.265/4K/12.5M/30p H.265/FHD/20M/60p A / B 59.94p / 25 Mbps 29.97p / 25 Mbps 29.97p / 12.5 Mbps H.265/HEVC 59.94p / 20 Mbps H.265/FHD/16M/60p 1920x1080 H.265/FHD/12M/30p 59.94p / 16 Mbps 29.97p / 12 Mbps H.265/FHD/6M/30p 29.97p / 6 Mbps H.
13. Streaming Function A Frame rate B Bit rate [System Frequency]: [50.00Hz (PAL)] [Streaming Quality] H.265/4K/50M/50p* Video compression format Resolution H.265/4K/25M/50p*1 3840x2160 H.265/4K/25M/25p H.265/4K/12.5M/25p H.265/FHD/20M/50p A / B 50.00p / 50 Mbps 1 50.00p / 25 Mbps 25.00p / 25 Mbps 25.00p / 12.5 Mbps H.265/HEVC 50.00p / 20 Mbps H.265/FHD/16M/50p 1920x1080 H.265/FHD/12M/25p 50.00p / 16 Mbps 25.00p / 12 Mbps H.265/FHD/6M/25p 25.00p / 6 Mbps H.264/4K/50M/50p*1 50.
14. Materials - Optional Accessories 14. Materials Optional Accessories (Product numbers correct as of October 2021.) Battery Pack AG-VBR59, AG-VBR89, AG-VBR118 Battery Charger AG-BRD50 LED Video Light VW-LED1 Stereo Shotgun Microphone DMW-MS2 Stereo Microphone VW-VMS10 XLR Microphone Adaptor DMW-XLR1 Tripod adaptor*1 DMW-TA1 *1 Use if the attached lens is in contact with the tripod pedestal. ●● Some optional accessories may not be available in some countries.
14. Materials - External Monitor Displays External Monitor Displays Recording Screen 59.94p 00:00:00.00 100 AWBc AWBw F 4.0 [White Balance] ( 89 / White Balance (WB)) White balance adjustment ( [Photo Style] ( 24m59s 3200 92 / Adjusting the White Balance) 94 / [Photo Style]) [Filter Settings] ( 99 / [Filter Settings]) / Filter effect adjustment ( 100 / Adjusting the Filter Effect) LUT View Assist ( MP4 MOV 121 / [V-Log View Assist]) [HLG View Assist] ( 127 / [HLG View Assist]) [Rec.
14. Materials - External Monitor Displays Bluetooth connection status ( [Location Logging] ( 214 / Checking operation when connected to a network) 238 / [Location Logging]) [Image Stabilizer] ( 105 / [Image Stabilizer]) Jitter warning [Anamorphic Desqueeze Display] ( 129 / [Anamorphic Desqueeze Display]) [Loop Recording (video)] ( 131 / [Loop Recording (video)]) Streaming function is ON ( 249 / 13. Streaming Function) Currently streaming ( [Histogram] ( 249 / 13.
14. Materials - External Monitor Displays 2021.12. 1 10:00:00 [Time Stamp Rec.] ( 191 / [Time Stamp Rec.]) Recording state (lit in red) ( [Exposure Mode] ( 47 / Screen Displays While Video Recording) 48 / [Exposure Mode]), Recording mode ( 182 / [Rec Mode] menu) [Metering Mode] ( AEL [AE LOCK] ( 100 Shutter speed F4.0 Aperture value 83 / [Metering Mode]) 85 / Locking Focus and Exposure (AF/AE Lock)) [Exposure Comp.
14.
14. Materials - External Monitor Displays [Rec. File Format] ( 50 / [Rec.
14.
14. Materials - External Monitor Displays Playback Screen 2021.12. 1 10:00 100-0001 1/999 8m30s 00:00:00.00 100 2021.12. 1 10:00 F 4.0 59.
14. Materials - External Monitor Displays Group images ( 157 / Group Images) TC 00:00:00.00 Time code ( 48kHz/16bit [XLR Mic Adaptor Setting] ( MP4 MOV [Rec. File Format] ( FHD 420/8-L [Rec Quality] ( 59.94p Frame rate ( 60/59.94p Rate]) 61 / Time Code) 147 / XLR Microphone Adaptor (Optional)) 50 / [Rec.
14. Materials - External Monitor Displays ■■Detailed information display screen Card slot ( 25 / Inserting Cards (Optional)) Recording date and time ( Folder/file number ( 30 / Clock Set) 152 / Folder Structure Inside Card) Recording information (basic) Recording information (advanced) Detailed information display 1/5 3200 100 F4.0 2021.12. 1 10:00 100-0001 Histogram display 2/5 R G 3200 100 F4.0 B Y 2021.12. 1 10:00 100-0001 Photo Style display Standard 3200 100 F4.0 2021.12.
14. Materials - External Monitor Displays White balance display Auto White Balance 4/5 G A 3200 100 B F4.0 M 2021.12. 1 10:00 100-0001 Lens information display 5/5 Focal Length 24mm 35mm Focal Length 24mm ON Long Exposure NR OFF 3200 100 F4.0 Vignetting Comp. 2021.12. 1 10:00 100-0001 The focal length corresponding to the angle of view when using a full-frame lens with an image aspect ratio of 3:2.
14. Materials - Lamp / Indicator Display Lamp / Indicator Display Shows the status of the camera with the lamp/indicator. ■■Status indicator (Green / Orange) Lights up (Green) Lights up (Orange) The camera is turned on. Tether connect mode ( 221 / Tether Connection Mode) ●● When using PoE+ power supply. Determining PoE+. ( 17 / Supplying power from a PoE+ power supply) Blinks (Green, once/sec.) ●● When using battery. Low battery (It blinks in orange when in Tether connect mode.
14. Materials - Message Displays Message Displays Meanings of main messages and response methods. Card [Memory Card Error] / [Format this card?] ●● It is a format that cannot be used with the camera. Either insert another card, or back up any necessary data before formatting. ( 27 / Formatting Cards (Initialization)) [Memory Card Error] / [This memory card cannot be used] ●● Use a card compatible with the camera. ( 10 / Memory Cards That Can Be Used) [Insert memory card again.
14. Materials - Message Displays Others [Some pictures cannot be deleted] / [This picture cannot be deleted] ●● Images that do not comply with the DCF standard cannot be deleted. Back up any necessary data before formatting the card. ( 27 / Formatting Cards (Initialization)) [A folder cannot be created] ●● The maximum number of folder numbers has been reached, so new folders cannot be created. After formatting, execute [File Number Reset] in the [Setup] ([Card/File]) menu.
14. Materials - Troubleshooting Troubleshooting First, try out the following procedures. If the problem is not resolved, it may be improved by selecting [Reset] ( 45 / [Reset]) in the [Setup] ([Setting]) menu. Power The camera does not turn on. ●● You cannot use a PoE (IEEE 802.3af compliant) compatible switching hub or power supplying device. ●● Power may not be supplied if the total power limit is exceeded on power supply devices that allow connections to multiple PoE+ terminals.
14. Materials - Troubleshooting The images are not output to the external monitor or external recorder during playback. ●● Check the settings in [Output Resolution(Playback)] under [HDMI / SDI Connections] of the [Setup] ([IN/OUT]) menu. ( 204 / [Output Resolution(Playback)]) ●● Set the [SDI Output] to [ON] from the [HDMI / SDI Connections] of the [Setup] ([IN/OUT]) menu when the images do not show up on the SDI output destination. ●● When you press [Q.
14. Materials - Troubleshooting Recording Cannot record videos. ●● When using a large capacity card, you may not be able to record for a while after turning on the camera. Recording stops before finishing. Cannot use some functions. ●● Recording video requires a card of a supported Speed Class. Use a compatible card. ( 10 / Memory Cards That Can Be Used) ●● In high ambient temperatures or if the camera is used for continuous recording, the temperature of the camera will rise.
14. Materials - Troubleshooting Striping or flicker may appear under lighting such as fluorescent or LED lighting. ●● This is characteristic of CMOS sensors which serve as the camera’s pickup sensors. This is not a malfunction. ●● If flicker or horizontal stripes are noticeable when recording video, this can be mitigated by fixing the shutter speed. ●● You can fine-adjust the shutter speed with [Synchro Scan]. ( 130 / [Synchro Scan]) Stripes appear in high ISO sensitivity.
14. Materials - Troubleshooting Playback Cannot playback. There are no recorded pictures. ●● Folders and images processed on a PC cannot be played. ●● Videos recorded with a different [System Frequency] setting cannot be played back. Return the [System Frequency] setting to the one you used during the recording. ( 50 / [System Frequency]) Wi-Fi Function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed.
14. Materials - Troubleshooting Connection to a smartphone via Wi-Fi cannot be established. ●● Change the access point to connect to in the smartphone Wi-Fi settings to the camera. The PC is not recognized when I use a Wi-Fi connection. The camera cannot be connected to the PC using the Wi-Fi function. ●● When the clock settings of the PC connected to the camera differs considerably from those of the camera, the camera cannot be connected to the PC depending on the OS.
14. Materials - Cautions for Use Cautions for Use ■■The camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ●● If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. ●● Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
14. Materials - Cautions for Use ■■Cleaning Before cleaning the camera, disconnect the power plug from the electrical outlet. Then wipe the camera with a dry, soft cloth. ●● When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth. ●● Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the camera, since it may deteriorate the external case or the coating may peel off.
14. Materials - Cautions for Use ■■Personal Information Personal information is stored within the camera and in recorded images. We recommend that you enhance security by setting Wi-Fi password and a wired LAN/Wi-Fi function lock to protect personal information. ( 247 / [LAN / Wi-Fi Setup] menu) ●● Images may contain information that can be used to identify the user, such as recording dates and times, and location information. Confirm details carefully before uploading images to a web service.
14. Materials - Cautions for Use ■■Tripod / Unipod ●● Make sure the tripod/unipod is stable when the camera is attached to it. ●● Care is required because tightening the screw excessively may damage the camera, or cause the rating label to come off. ●● When using this unit with a large-diameter lens, the lens may come into contact with the pedestal depending on the tripod/unipod. Tightening the screw with the lens and pedestal in contact with each other may damage this unit or the lens.
14. Materials - Available Recording Time with the Battery Available Recording Time with the Battery Listed below are the time lengths available for recording when the battery is being used. ●● Using a Panasonic SDHC memory card. ●● Using the interchangeable lens (S-R24105). ●● When outputting via HDMI to an external monitor. ●● The values listed are approximate.
14. Materials - Available Recording Time with the Battery ■■AG-VBR89 [Rec. File Format]: [MP4] Continuous available recording time [Rec Quality] (Actual available recording time) (minutes) [Image Area of Video] [FULL] [S35mm] 4K/10bit/100M/60p — 360 (180) 4K/8bit/100M/30p 430 (215) 420 (210) FHD/8bit/28M/60p 470 (235) 410 (205) [Rec. File Format]: [MOV] Continuous available recording time [Rec Quality] (Actual available recording time) (minutes) [Image Area of Video] [FULL] [S35mm] 5.
14. Materials - Available Recording Time with the Battery ■■AG-VBR118 [Rec. File Format]: [MP4] Continuous available recording time [Rec Quality] (Actual available recording time) (minutes) [Image Area of Video] [FULL] [S35mm] 4K/10bit/100M/60p — 480 (240) 4K/8bit/100M/30p 570 (285) 560 (280) FHD/8bit/28M/60p 630 (315) 550 (275) [Rec. File Format]: [MOV] Continuous available recording time [Rec Quality] (Actual available recording time) (minutes) [Image Area of Video] [FULL] [S35mm] 5.
14. Materials - Video Recording Time with Cards Video Recording Time with Cards Listed below are the time lengths of videos that can be recorded on a card. ●● The values listed are approximate. ●● Video recording time is the total time of all the videos which have been recorded. [Rec. File Format]: [MP4] ■■[System Frequency]: [59.
14. Materials - Video Recording Time with Cards [Rec. File Format]: [MOV] ■■[System Frequency]: [59.94Hz (NTSC)] [Rec Quality] Card capacity 32 GB 64 GB 128 GB 10m00s 21m00s 42m00s 20m00s 42m00s 1h20m 27m00s 56m00s 1h50m 41m00s 1h25m 2h45m 1h20m 2h50m 5h35m [4K-A/30p/422/10-I] [4K-A/24p/422/10-I] [C4K/30p/422/10-I] [C4K/24p/422/10-I] [4K/30p/422/10-I] [4K/24p/422/10-I] [6K/24p/420/10-L] [5.9K/30p/420/10-L] [5.9K/24p/420/10-L] [5.
14. Materials - Video Recording Time with Cards ■■[System Frequency]: [50.00Hz (PAL)] [Rec Quality] Card capacity 32 GB 64 GB 128 GB 10m00s 21m00s 42m00s 20m00s 42m00s 1h20m 27m00s 56m00s 1h50m 41m00s 1h25m 2h45m 1h20m 2h50m 5h35m [4K-A/25p/422/10-I] [C4K/25p/422/10-I] [4K/25p/422/10-I] [5.9K/25p/420/10-L] [5.
14. Materials - Video Recording Time with Cards ■■[System Frequency]: [24.00Hz (CINEMA)] [Rec Quality] Card capacity 32 GB 64 GB 128 GB 10m00s 21m00s 42m00s 20m00s 42m00s 1h20m 27m00s 56m00s 1h50m 41m00s 1h25m 2h45m [4K-A/24p/422/10-I] [C4K/24p/422/10-I] [4K/24p/422/10-I] [6K/24p/420/10-L] [5.
14. Materials - List of Default Settings / Custom Saving / Settings Available for Copying List of Default Settings / Custom Saving / Settings Available for Copying : The function to return to default settings using [Reset]. : The function to save settings details in the Custom mode using [Save to Custom Mode]. : The function to copy settings details using [Save/Restore Camera Setting].
14. Materials - List of Default Settings / Custom Saving / Settings Available for Copying [Video]: [Image Format] When [System Frequency] is set to [59.94Hz (NTSC)] or [50.00Hz (PAL)]: [MP4] [Rec. File Format] When [System Frequency] is set to [24.00Hz (CINEMA)]: [MOV] [Image Area of Video] [FULL] When [System Frequency] is set to [59.94Hz (NTSC)]: [FHD/8bit/28M/60p] When [System Frequency] [Rec Quality] is set to [50.00Hz (PAL)]: [FHD/8bit/28M/50p] When [System Frequency] is set to [24.
14. Materials - List of Default Settings / Custom Saving / Settings Available for Copying [Video]: [Focus] [Focus Mode] [AF] [AF Mode] [ [AF Custom Setting(Video)] [ON] / [OFF] [OFF] [SET] — [Continuous AF] [Focus Peaking] [MODE2] [ON] / [OFF] [ON] [SET] — [1-Area AF Moving Speed] [Video]: ] [FAST] [Audio] [Sound Rec Level Disp.] [OFF] [Mute Sound Input] [OFF] [Sound Rec Gain Level] [STANDARD] [Sound Rec Level Adj.
14. Materials - List of Default Settings / Custom Saving / Settings Available for Copying [Video]: [Others] [Image Stabilizer] [Focus Transition] [Operation Mode] [ [E-Stabilization (Video)] [OFF] [Boost I.S. (Video)] [OFF] [Start] — — [Focus Pull Setting] — — [Focus Transition Speed] [M] [Focus Transition Rec] [OFF] [Focus Transition Wait] [OFF] ] [Loop Recording (video)] [OFF] [Segmented File Recording] [OFF] [Live Cropping] [OFF] [Time Stamp Rec.
14. Materials - List of Default Settings / Custom Saving / Settings Available for Copying [Custom]: [Focus/Shutter] [AF/AE Lock Hold] [OFF] [AF+MF] [OFF] [MF Assist] [Focus Ring] [ON] [AF Mode] [ON] [MF Assist Display] [PIP] [MF Guide] [ [Focus Ring Lock] [OFF] [Custom]: ]/[ [Operation] [Q.
14.
14. Materials - List of Default Settings / Custom Saving / Settings Available for Copying [Custom]: [IN/OUT] [HDMI Rec Output] [Down Convert] [AUTO] [HDMI Recording Control] [OFF] [Sound Down Convert] [OFF] [Sound Output (HDMI)] [ON] [HDMI MF Assist Output] [ON] When [System Frequency] is set to [59.94Hz (NTSC)] or [SDI Output Resolution] [50.00Hz(PAL)]: [1080p] When [System Frequency] is set to [24.
14. Materials - List of Default Settings / Custom Saving / Settings Available for Copying [Setup]: [Card/File] [Card Format] — [Double Card Slot Function] [Folder / File Settings] [Recording Method] [ ] [Destination Card Slot] [ [Select Folder] — — [Create a New Folder] — — [File Name Setting] [Folder Number Link] [File Number Reset] [Copyright Information] [Setup]: — — [Artist] [OFF] [Copyright Holder] [OFF] [Display Copyright Info.] — [Adjust.
14. Materials - List of Default Settings / Custom Saving / Settings Available for Copying [Setup]: [IN/OUT] [Headphone Volume] [LEVEL3] [LAN / Wi-Fi] — [Bluetooth] — [USB Mode] [ [SDI Output] *2 ] [PC(Tether)] [ON] When [SDI Output] is set to [ON]: [1080p] (It is [1080PsF] when [System [Output Resolution(Playback)] Frequency] is set to [24.
14. Materials - List of Default Settings / Custom Saving / Settings Available for Copying [Setup]: [Setting] [Save to Custom Mode] — [Load Custom Mode] — [Custom Mode Settings] [Save/Restore Camera Setting] [Limit No. of Custom Mode] [5] [Edit Title] — [How to Reload Custom Mode] — [Select Loading Details] — [Save] — — [Load] — — [Delete] — — [Keep Settings While Format] [OFF] [Reset] — — [Clock Set] 0:00:00 1/1/2021 — [Time Zone] *1 [Setup]: [Others] [59.
14. Materials - List of Default Settings / Custom Saving / Settings Available for Copying [Playback] menu: [Playback Mode] [Anamorphic Desqueeze Display] [Playback] menu: [OFF] [Add/Delete Info.] [Protect] — — [Rating] — — — — — — [Playback] menu: [Edit Image] [Copy] [Playback] menu: [Others] [Delete All Images] *1 Default setting specifications vary depending on the country or area where the camera was purchased.
14. Materials - Specifications Specifications The specifications are subject to change for performance enhancement. It is possible to record photos (still images) using software “LUMIX Tether”. Digital camera body (DC-BS1H): Information for your safety Power source: 12 V Power consumption: 8.1 W (when recording), 6.9 W (when playing back) [When the interchangeable lens S-R24105 is attached.
14. Materials - Specifications Recording format for video Video format MP4 (H.264/MPEG-4 AVC, H.265/HEVC) MOV (H.264/MPEG-4 AVC, H.265/HEVC) MP4: AAC (2ch) Audio format MOV: LPCM (2ch, 48 kHz/16 bit)*2 *2 When an XLR Microphone Adaptor (DMW-XLR1: optional) is attached, LPCM (2ch, 48 kHz/24-bit, 96 kHz/24-bit) can be selected Image quality for video Refer to [Rec Quality] in this document.
14. Materials - Specifications Exposure control Light metering system, Light 1728-zone metering, multi-metering / center-weighted metering / spot metering / highlight- metering mode weighted metering (only for video) Metering range EV 0 to EV 18 (F2.
14.
14. Materials - Specifications Interface Ø2.5 mm jack [REMOTE] Terminal for generic remote control unit (A Panasonic shutter remote control (DMW-RS2) cannot be used.) [DC IN 12 V] DC 12 V (11.4 V to 12.6 V), EIAJ Type 4 [MIC] Ø3.5 mm stereo mini jack Headphones Ø3.5 mm stereo mini jack LAN connector [SDI OUT] LAN terminal (RJ-45) for remote control×1, compatible with power supply by PoE+ (IEEE 802.3at compliant) BNC terminal×1, 0.
14. Materials - Specifications Wi-Fi Compliance standard Frequency range used (central frequency) IEEE 802.11b/g/n (standard wireless LAN protocol) Specifications vary depending on the country or area where the camera was purchased. Refer to the “Operating Instructions / Owner’s Manual ” (supplied) for details. Encryption method Wi-Fi compliant WPA™/WPA2™ Access method Infrastructure mode Bluetooth Compliance standard Frequency range used (central frequency) Bluetooth Ver. 4.
14. Materials - Trademarks and Licenses Trademarks and Licenses ●● L-Mount is a trademark or registered trademark of Leica Camera AG. ●● SDXC Logo is a trademark of SD-3C, LLC. ●● The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. ●● USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum.
14. Materials - Trademarks and Licenses ●● The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. ●● The Wi-Fi CERTIFIED™ Logo is a registered trademark of Wi-Fi Alliance®. ●● The Wi-Fi Protected Setup™ Logo is a trademark of Wi-Fi Alliance®. ●● “Wi-Fi®” is a registered trademark of Wi-Fi Alliance®.
14. Materials - Trademarks and Licenses This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0), (4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or (5) open source software other than the software licensed under the GPL V2.
14. Materials - Trademarks and Licenses Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
