Printer Operating Instructions DA-MC700

22
2.2 Installing the Printer Driver (AdobePS 5.1)
Output Destination
Specify the type of output tray installed on your printer. The options
available are Main Tray/Finisher Tray 1 and Finisher Tray 2.
Staple Position
Specify whether you want the documents to be stapled and where
you want them stapled.
Punch Position
Specify whether you want the documents to be punched and where
you want them punched.
Bypass Feed Orientation
Specify Short Edge Setting or Long Edge Setting.
Select Substitute Tray
The following selections are available:
Use Printer Settings
Nearest size (Adjust to Fit)
Nearest size (No Zoom)
Next larger size (Adjust to Fit)
Next larger size (No Zoom)
Abort Job
Correct Custom Paper Direction
When you are using a non-standard paper size, select the paper
direction. Depending on the application, printing may be done
incorrectly on the non-standard sized paper. Select On to avoid this.