VQT0N05Eng.book 1 ページ 2004年11月22日 月曜日 午前10時12分 Operating Instructions SD Multi Camera Model No. SV-AS30 Before use, please read these instructions completely.
VQT0N05Eng.book 2 ページ 2004年11月22日 月曜日 午前10時12分 Contents Preparation Information for Your Safety............... 4 Introduction ....................................... 6 Accessories ...................................... 8 Available Card .................................. 9 Components ................................... 10 Inserting/Removing the Battery or the Card .................................. 12 Charging the Battery....................... 14 Turning This Unit On.......................
VQT0N05Eng.book 3 ページ 2004年11月22日 Connecting to PC Operating Environment of the Software ............................ Before Connecting to a PC for the First Time (Installation) ....... Installing the USB Driver ................. Installing SD Viewer ........................ Installing SD-Jukebox ..................... Connecting to a PC ......................... Checking that This Unit Is Properly Recognised by the PC................. Disconnecting the USB Cable Safely.....................................
VQT0N05Eng.book 4 ページ 2004年11月22日 月曜日 午前10時12分 Preparation Information for Your Safety WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES AND DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
VQT0N05Eng.book 5 ページ 2004年11月22日 月曜日 午前10時12分 IMPORTANT Please respect all copyrights. Whatever you have recorded and created can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights. ≥ Injury or material damage resulting from any kind of use that is not in accordance with the operating Instructions are the sole responsibility of the user.
VQT0N05Eng.book 6 ページ 2004年11月22日 月曜日 午前10時12分 Preparation (continued) Introduction Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic SD Multi Camera. Please read these Operating Instructions carefully and keep them handy for future reference. ≥ SD logo is a trademark. ≥ MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia.
VQT0N05Eng.book 7 ページ 2004年11月22日 月曜日 午前10時12分 ≥ Music recognition technology and related data are provided by Gracenote and the Gracenote CDDB music recognition service. Gracenote is the industry standard in music recognition technology and related content delivery. For more information visit www.gracenote.com. ≥ CD and music-related data from Gracenote, Inc., copyright C 2000– 2003 Gracenote. Gracenote CDDB® Client Software, copyright 2000–2003 Gracenote.
VQT0N05Eng.book 8 ページ 2004年11月22日 月曜日 Preparation (continued) Accessories Check the accessories before using this unit. SD Memory Card is not included.
VQT0N05Eng.book 9 ページ 2004年11月22日 月曜日 午前10時12分 ∫ Optional Accessory ≥ Battery Pack (CGA-S003E/1B) Available Card ≥ The card available for this unit is SD Memory Card. (MultiMediaCard is not available.) ≥ We recommend using Panasonic SD Memory Card. ∫ About SD Memory Card (optional) ≥ The SD Memory Card is a small, lightweight and removable external card. The SD Memory Card is equipped with a write-protect switch 1 that can inhibit writing and formatting.
VQT0N05Eng.book 10 ページ 2004年11月22日 月曜日 午前10時12分 Preparation (continued) Components ∫ Body 3 1 2 4 5 6 7 8 1 2 3 4 5 6 7 8 • It is used for setting the menu, playing files, zooming, adjusting the volume, etc. • It blinks (lights) in red (Recording Mode) or green (Playback Mode) when you switch the mode, operate the menu or turn this unit on.
VQT0N05Eng.book 18 19 20 21 22 18 19 20 21 22 1 2 6 3 4 5 7 月曜日 午前10時12分 Card Slot (P13) Connector for USB Cradle (P14) Battery Slot (P13) Battery Lock (P12) Card/Battery Door (P12) ∫ Remote Controller (P27, 63) 1 Stereo Earphone Socket 2 Volume Button [s VOL r] 3 Playback/Stop Button [1/∫] Shutter Button [¥] 4 Fast-forward Button [9] 5 Fast-rewind Button [:] 6 Hold Switch [1HOLD] • It locks buttons on the remote controller.
VQT0N05Eng.book 12 ページ 2004年11月22日 月曜日 午前10時12分 Preparation (continued) Inserting/Removing the Battery or the Card Be sure to turn this unit off before the following operations. 1 Open the Card/Battery Door at the bottom of this unit. • Slide the Door and then open it. 2 Insert/remove the battery or the card. • Read the next page carefully. 3 Close the Card/Battery Door. • Close the Door and then lock it while sliding. ≥ Never open the Card/Battery Door during the access.
VQT0N05Eng.book 13 ページ 2004年11月22日 月曜日 午前10時12分 ∫ When inserting the card/battery 1 2 3 1 Notch 2 Card Slot 3 Battery Slot • Be sure to confirm the direction to insert the card/battery. • Insert the card/battery fully and firmly. (The card clicks if it is fully inserted.) • Do not touch the connecting terminal on the rear of the card. ∫ When removing the card/battery 1 2 Press the card until it clicks and then pull out the card.
VQT0N05Eng.book 14 ページ 2004年11月22日 月曜日 午前10時12分 Preparation (continued) Charging the Battery Be sure to turn this unit off before the following procedure. (When this unit is turned on, the battery cannot be charged.) Use the AC adaptor supplied for this unit. 2 1 Connect the AC mains lead to the AC adaptor and the AC mains socket. And then connect the DC input lead to the USB cradle. • The AC mains lead does not fit entirely into the AC adaptor socket. A gap will remain as shown 1.
VQT0N05Eng.book 15 ページ 2004年11月22日 月曜日 午前10時12分 ∫ Charging time and the number of recordable pictures/ time (per a battery) Charging time Approx. 90 minutes The number of recordable pictures [Picture] Continuous recording time [MPEG4] Approx. 70 minutes Continuous playback time Approx. 140 pictures (Recording conditions by CIPA standards) [MPEG4] Approx. 160 minutes [Audio] Approx.
VQT0N05Eng.book 16 ページ 2004年11月22日 月曜日 午前10時12分 Preparation (continued) ≥ The battery is warmed during and after charging. The SD Multi Camera is also warmed during the operation, however, it is not a malfunction. ≥ When you do not use this unit, detach this unit from the USB cradle and disconnect the AC mains lead from the electrical outlet. Turning This Unit On 1 1 Slide the Power Switch to [ON]. • This unit is turned off when you slide the Power Switch to [OFF].
VQT0N05Eng.book 17 ページ 2004年11月22日 月曜日 午前10時12分 ∫ Battery indicator ≥ It is displayed on the LCD Monitor (P93) when this unit is turned on. ≥ As the remaining battery power is decreased, the indicator is changed as > > (blinking). When the indicator is shown as (blinking), the battery will be exhausted in a few minutes. Charge the battery. ≥ The indication of the remaining battery power may be increased or decreased depending on each mode. Check the indicator every time you switch the mode.
VQT0N05Eng.book 18 ページ 2004年11月22日 月曜日 午前10時12分 Preparation (continued) Picture MPEG4 EXIT 1 EXIT 2 MODE MODE 2 Tap the [MODE] button 1, and then roll the Jog Ball 2 to select the mode. – The selected icon is enlarged. • When the [MODE] button is tapped without a card in this unit, the demonstration mode (P92) is activated. 3 Press the Jog Ball to set. • Refer to P26 for the modes in the recording mode and refer to P43 for the modes in the playback mode.
VQT0N05Eng.book 19 ページ 2004年11月22日 月曜日 午前10時12分 Flash Auto MENU EXIT 2 MENU EXIT MODE MODE 2 Roll the Jog Ball 2 to select the sub-menu, and then press the Jog Ball to set. – The sub-menu screen appears. Flash off MENU EXIT MODE MODE MENU MENU 3 Roll the Job Ball to select the desired item, and then press the Jog Ball to set. – The setting is changed and the menu screen disappears. • If you have other items to select, repeat Step 3. ≥ To stop the operation, press the [MENU] button.
VQT0N05Eng.book 20 ページ 2004年11月22日 月曜日 午前10時12分 Preparation (continued) Setup Menu You can change the settings on this unit in the menu. 1 Press the [MENU] button and then set the desired items with the Jog Ball. (P18) Setup l Select the following items for the settings. ∫ Setting on the operation sound Beep ON Volume l Beep OFF Main volume Turns on the operation sound. Turns off the operation sound. Adjusts the volume of the stereo earphones.
VQT0N05Eng.book 21 ページ 2004年11月22日 月曜日 午前10時12分 ∫ Setting on the USB connection Connection (USB) l Connection (PC) PictBridge Connects to the PC. (P73) Connects to the printer. (P55) ∫ Setting on the LCD Monitor Display setup Icon display Displays or hides the icon display. Brightness Adjusts the brightness of the LCD Monitor. l ∫ Setting on the power 5min power off Auto power off l Cancel No operation for about 5 minutes leads to power off.
VQT0N05Eng.book 22 ページ 2004年11月22日 月曜日 午前10時12分 Preparation (continued) ∫ Setting on the clock Clock set Sets the date and time. ∫ Formatting (initialising) the card If the card is formatted, all the data (including protected files) cannot be recovered. Check the data before formatting. Format ∫ Restoring the settings Reset settings Resets to the initial settings except the clock setting. Setting the Clock The clock is not set at the time of purchase.
VQT0N05Eng.book 23 ページ 2004年11月22日 SEL 月曜日 午前10時12分 ENTER MENU EXIT MODE 2 Adjust the date and time with the Jog Ball. • The highlight moves between the items (Day, Month, Year, Hour Minute) every time you press the Jog Ball. When you roll the Jog Ball up or down, the value is changed. (You can set the year from 2000 to 2099.) • The time is displayed in 24 hour system. SEL ENTER MENU EXIT MODE MENU 3 Press the [MENU] button after adjusting the date and time. – The setup screen disappears.
VQT0N05Eng.book 24 ページ 2004年11月22日 月曜日 午前10時12分 Preparation (continued) Shortcut Menu 1 Press the [MENU] button for 1 or more seconds and then set the item with the Jog Ball. • Roll the Jog Ball up/down/left/right to select the item and then press the Jog Ball to set the item. • Press the [MENU] button to exit the shortcut menu.
VQT0N05Eng.book 25 ページ 2004年11月22日 月曜日 午前10時12分 Recording Before Recording ∫ How to hold the SD Multi Camera ≥ Put your arm on the side of your body. ≥ Fix the SD Multi Camera with your right hand and put your left hand on the SD Multi Camera. ≥ The shutter speed can be automatically adjusted. The shutter speed becomes slow in dark places such as shaded areas or in a room. Therefore, be careful not to shake the SD Multi Camera and press the shutter button gently.
VQT0N05Eng.book 26 ページ 2004年11月22日 月曜日 午前10時12分 Recording (continued) Recording This unit can focus on the subject at a distance of about 60 cm or more. When you record close subjects, use the Macro function (P34). ∫ Selecting the desired recording mode 1 Slide the Power Switch to [ON]. – The Power Lamp lights in red. Slide the Record/Playback Mode Switch to the recording mode [ 2 Picture EXIT ]. Press the [MODE] button and then select the desired mode with the Jog Ball.
VQT0N05Eng.book ∫ 27 ページ 2004年11月22日 午前10時12分 When selecting [Picture] 1 Tap the Shutter button for recording. MODE MENU ∫ 月曜日 • You can also use the Shutter button on the remote controller. • Recorded pictures are played for a few seconds after you finish recording pictures. When selecting [MPEG4] or [Voice] 1 Tap the Shutter button for recording. MODE – [¥] appears during recording. • You can also use the Shutter button on the remote controller.
VQT0N05Eng.book 28 ページ 2004年11月22日 月曜日 午前10時12分 Recording (continued) ≥ Do not cover the microphone with your finger or other objects during recording. Be careful not to touch the Jog Ball or any other buttons. Noises may be recorded. ∫ When recording in [Picture] mode [Advanced setup] > [Reset file No.] on the menu setting, you can reset the file number in recording to a card to 0001. (The folder number is increased by 1.
VQT0N05Eng.
VQT0N05Eng.book 30 ページ 2004年11月22日 月曜日 午前10時12分 Recording (continued) Voice 8 MB 25 min. 128 MB 8 h 30 min. 16 MB 58 min. 256 MB 16 h. 32 MB 2 h. 512 MB 33 h. 64 MB 4 h. 1 GB 66 h. ≥ The time listed above tables are approximate. ≥ The numbers of recordable pictures described in the above [Picture] ≥ ≥ ≥ ≥ 30 VQT0N05 table are applicable when the picture quality is set to [Fine]. The numbers in brackets are applicable in the case of [Normal].
VQT0N05Eng.book 31 ページ 2004年11月22日 月曜日 午前10時12分 Changing the Picture Size and Quality 1 ∫ Press the [MENU] button and then set the item with the Jog Ball. (P18) Size and quality of the picture recorded in [Picture] 2016a 1512 Fine HDTV l 1600a 1200 l Quality 1280a 960 Normal Gives priority to picture quality. (High picture quality) Gives priority to the number of recordable pictures.
VQT0N05Eng.book 32 ページ 2004年11月22日 月曜日 午前10時12分 Recording (continued) ≥ When [HDTV] (picture size: 1920a1080) is selected, the pictures ≥ ≥ ≥ ≥ ≥ ≥ ≥ ≥ 32 VQT0N05 are recorded with the aspect ratio equal to the High-Definition TV (16:9). The larger the picture size (values such as [640a480]) is, the larger the file size will become. If you select a larger picture size in the [Picture] mode, the printed picture will be clearer.
VQT0N05Eng.book 33 ページ 2004年11月22日 月曜日 午前10時12分 Enlarging Pictures (Digital Zoom) 1 Press the Jog Ball. – The zoom magnification appears. 1. 0t MODE 2 Roll the Jog Ball up or down to set the zoom magnification. 2. 0t MODE • You can enlarge the picture up to 4k. • The magnification is restored to 1k by pressing the Jog Ball. ≥ The more the picture is enlarged, the more the picture quality is deteriorated. ≥ You cannot enlarge pictures while pictures are recorded in [MPEG4] mode.
VQT0N05Eng.book 34 ページ 2004年11月22日 月曜日 午前10時12分 Recording (continued) Focusing on Close Subjects (Macro) You can take pictures with the subject focused at a distance of about 10 cm from the Lens. 1 Slide the Macro Switch to the left. ≥ We recommend recording the same picture several time and choosing a well-focused picture. ≥ If you do not record pictures with macro function, slide the Macro Switch back to the right. Reversing Pictures (Self-recording) 1 Rotate the Lens.
VQT0N05Eng.book 35 ページ 2004年11月22日 2 月曜日 午前10時12分 Press the [REV] button. – The picture on the screen is vertically reversed as if the picture is reflected in a mirror. 3 Press the Shutter button to take a picture. MODE MENU • Press the shutter button again to stop recording in MPEG4 mode. ≥ The focus range is about 60 cm or more away from the front surface of the lens. ≥ Pictures actually recorded will be horizontally reversed from the pictures on the LCD Monitor.
VQT0N05Eng.book 36 ページ 2004年11月22日 月曜日 午前10時12分 Recording (continued) Setting the Flash The available flash range is about 80 cm–120 cm. Turn the Lens to the front before the setting. If it is not turned to the front, the flash is not activated. 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) Auto Reduced red eye l Flash Flash off Flash on 36 VQT0N05 The flash is automatically activated according to the recording situation.
VQT0N05Eng.book ∫ 37 ページ 2004年11月22日 月曜日 午前10時12分 The flash is not activated ≥ The flash cannot be activated in the following cases. – When you rotate the Lens ([ ] appears on the LCD Monitor.) – When you set the flash to [Auto] or [Reduced red eye] in bright places – When recording in [MPEG4] mode ≥ When you record pictures without using the flash, set the ISO sensitivity to adjust the brightness (P42).
VQT0N05Eng.book 38 ページ 2004年11月22日 月曜日 午前10時12分 Recording (continued) Recording with the Self-timer 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) You can select the time 10 s between the shutter 2s button is pressed and the (s: second) picture is actually recorded. l Self timer OFF 2 The self-timer is turned off. Press the Shutter button to take a picture.
VQT0N05Eng.book 39 ページ 2004年11月22日 月曜日 午前10時12分 Adjusting the Colour to Natural Tone (White Balance) This mode allows you to reproduce a white colour closer to the tone in real life on the pictures recorded under sunlight, halogen lighting, etc. in which the white colour may appear reddish or bluish. 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) Auto Incandescent White balance ∫ l You can automatically record pictures with natural tones.
VQT0N05Eng.book 40 ページ 2004年11月22日 月曜日 午前10時12分 Recording (continued) ≥ The white balance may not be set depending on the condition of the scene or the light source (e.g. in dark places, etc.). ≥ It is effective to set the white balance in [Manual] in the following scenes. – When recording under reddish lighting (halogen light bulb, sodium vapor lamp, etc.
VQT0N05Eng.book 41 ページ 2004年11月22日 月曜日 午前10時12分 Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference of brightness between the subject and the background, etc. 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) EV auto The exposure is automatically determined. EV manual The exposure can be adjusted manually.
VQT0N05Eng.book 42 ページ 2004年11月22日 月曜日 午前10時12分 Recording (continued) Setting the ISO Sensitivity ISO sensitivity represents the sensitivity to light in values. It is convenient to take pictures without the flash. 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) Advanced setup l Sensitivity Auto 100 200 400 l The ISO setting is automatically adjusted according to the brightness.
VQT0N05Eng.book 43 ページ 2004年11月22日 月曜日 午前10時12分 Playback Playback ∫ Selecting the desired playback mode 1 Slide the Power Switch to [ON]. – The Power Lamp lights in red. Slide the Record/Playback Mode Switch to the playback mode [ ]. 2 Press the [MODE] button and then select the desired mode with the Jog Ball. Picture EXIT • Refer to the table below to select the mode.
VQT0N05Eng.book 44 ページ 2004年11月22日 月曜日 午前10時12分 Playback (continued) 3 Roll the Jog Ball right or left to select the file you want to play. MODE MENU • Roll the Jog Ball to the right to display the next file. • Roll the Jog Ball to the left to display the previous file. ∫ When selecting [MPEG4] or [Voice] After you select the file in Step 3, 4 Press the Jog Ball to start playback. MODE – [1] appears during playback. • If there are multiple files, the files will be played continuously.
VQT0N05Eng.book 45 ページ 2004年11月22日 月曜日 午前10時12分 ≥ When playing a still picture, the [ ] icon appears for a moment and the resolution of the picture may look deteriorated a little. However, the picture is played with normal quality later. ≥ When starting the resume playback, the file earlier a bit from the position where you stopped is played. ≥ Some files may not be played on this unit even the files are in JPEG or ASF (MPEG4) format. ≥ [Voice] files cannot be played on Panasonic IC recorders.
VQT0N05Eng.book 46 ページ 2004年11月22日 月曜日 午前10時12分 Playback (continued) Adjusting Volume during Playback 1 Tap the [MENU] button during playback. 2 Roll the Jog Ball right or left to adjust the volume. MODE • If the volume adjustment screen is not operated for a while after adjustment, it will automatically disappear. ≥ When you want to listen to the audio being played, connect the remote controller and the stereo earphones (supplied). (You cannot listen to the audio on this unit.
VQT0N05Eng.book 47 ページ 2004年11月22日 月曜日 午前10時12分 Playing Motion Images Repeatedly (Repeat Playback) 1 Set the mode to [MPEG4] mode. (P43) 2 Press the [MENU] button and then set the item with the Jog Ball. (P18) OFF Repeat one l Stops playback after the last file is played. Repeats playing a file. Repeat Repeat all Repeats playing all files. Deleting Files Once deleted, files cannot be recovered. Check the files before deleting. 1 Press the [MENU] button and then set the item with the Jog Ball.
VQT0N05Eng.book 48 ページ 2004年11月22日 月曜日 午前10時12分 Playback (continued) 2 MODE Select the files to be deleted and then press the Jog Ball. (Only when [Erase one] is selected) MENU 3 Select [Yes] on the confirmation screen and then press the Jog Ball. MODE • Press the [MENU] button to exit this setting. MENU ≥ You cannot delete protected files (P49), music files and files that do not conform to DCF standard on this unit. ≥ Be sure to delete [Voice] files on this unit.
VQT0N05Eng.book 49 ページ 2004年11月22日 月曜日 午前10時12分 Preventing Accidental Erasure of Files (Lock Setting) This function allows you to prevent deleting of altering precious files by mistake. 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) Lock 2 l Lock/Unlock Select the files to be protected and then press the Jog Ball. MODE MENU –[ ] appears on the bottom of the LCD Monitor. • You can select the desired files until you press the [MENU] button.
VQT0N05Eng.book 50 ページ 2004年11月22日 月曜日 午前10時12分 Playback (continued) Enlarging Pictures (Target Zoom) You can enlarge the picture up to 10k. 1 Select a picture in [Picture] mode. (P43) 2 Roll the Jog Ball upwards. – The target frame appears on the LCD Monitor. 1. 2t MODE 3 Roll the Jog Ball up or down to select the zoom magnification and then press the Jog Ball. 4. 0t MODE 4 • The more you roll the Jog Ball upwards, the more the zoom magnification is increased (up to 10k).
VQT0N05Eng.book 51 ページ 2004年11月22日 月曜日 午前10時12分 ≥ You can cancel the zoom by opening the menu screen. ≥ The more the picture is enlarged, the more the picture quality is deteriorated. ≥ The zoom may not be done on a picture recorded with other equipment. Registering Still Pictures as “Favourite” Only pictures registered as a “Favourite” can be displayed or watched on the slide show (P54). 1 Set the mode to [Picture] mode. (P43) 2 Press the [MENU] button and then set the item with the Jog Ball.
VQT0N05Eng.book 52 ページ 2004年11月22日 月曜日 午前10時12分 Playback (continued) ∫ When you cancel registration on all files Select [Unselect all] in Step 2, select [Yes] on the confirmation screen and then press the Jog Ball. All pictures registered are cancelled. ≥ Up to 999 pictures can be registered as a “Favourite”. Creating a Slide Show with Audio You can create a slide show with the audio file in the card added as a BGM. 1 Set the mode to [Picture] mode.
VQT0N05Eng.book 53 ページ 2004年11月22日 4 月曜日 午前10時12分 Press the [MENU] button. MODE • If no audio file is recorded in the card, a slide show without audio is created. MENU 5 DO YOU NEED BACKGROUND MUSIC? Yes No (When there are audio files in the card) Select [Yes] or [No] on the confirmation screen and then press the Jog Ball. • If you select [No], a slide show without audio is created.
VQT0N05Eng.book 54 ページ 2004年11月22日 月曜日 午前10時12分 Playback (continued) Playing Still Pictures on the Slide Show Still pictures are automatically played in sequence. This function is suitable for making a story with still pictures. 1 Set the mode to [Picture] mode. (P43) 2 Press the [MENU] button and then set the item with the Jog Ball. (P18) Slide show l Play slide show l Slide show (with audio) Plays slide shows with audio (P52) created on this unit.
VQT0N05Eng.book 55 ページ 2004年11月22日 月曜日 午前10時12分 ≥ When you want to listen to the audio being played, connect the remote controller and the stereo earphones (supplied). (You cannot listen to the audio on this unit.) Printing Pictures Directly Connecting to a Printer (PictBridge) You can print still pictures played on this unit from the printer supporting PictBridge connected to this unit with the USB cable (supplied). (Turn the printer on beforehand.) 1 Set the mode to [Picture] mode.
VQT0N05Eng.book 56 ページ 2004年11月22日 月曜日 午前10時12分 Playback (continued) 4 Select a picture and then press the Jog Ball. MODE MENU 5 Check the setting, select [Print start] and then press the Jog Ball. 㪧㫀㪺㫋㪙㫉㫀㪻㪾㪼 COUNT Size Date ᲴᲫ ᲴPrinterSetting ᲴOFF Change Print start Print start Print starts. Start Change settings Change Changes the print setting. – When printing is finished, the message [PRINTING COMPLETED] appears. • To cancel printing, press the [MENU] button.
VQT0N05Eng.book 57 ページ 2004年11月22日 月曜日 午前10時12分 ≥ Do not use any other USB cables except the supplied one. ≥ While printing or cancelling the print, do not disconnect the USB cable or remove this unit from the USB cradle. ≥ Pictures recorded on other devices or altered on a PC may not be printed. ≥ If you unplug the AC adaptor while connecting with the printer, operations of buttons on this unit will be disabled.
VQT0N05Eng.book 58 ページ 2004年11月22日 月曜日 午前10時12分 Playback (continued) ≥ Error messages also appear in the following cases. Check the message before connecting.
VQT0N05Eng.book 59 ページ 2004年11月22日 3 MODE 月曜日 午前10時12分 Roll the Jog Ball left or right to select the desired file. (Only when [Single print] is selected) MENU 4 COUNT SEL 0 ENTER MENU EXIT MODE 5 Roll the Jog Ball up or down to select the number of prints and then press the Jog Ball. • The number of prints can be set from 1 to 99. • If you want to set DPOF setting on other pictures when [Single print] is selected, repeat Steps 3–4. Press the [MENU] button. – The setting is completed.
VQT0N05Eng.book 60 ページ 2004年11月22日 月曜日 午前10時12分 Playback (continued) ∫ When you print the date in DPOF printing Select [Print date]>[ON] in Step 2, select [Yes] on the confirmation screen and then press the Jog Ball. • Date printing is set to all the pictures that DPOF setting is set. (You cannot set date printing for each picture.) • You cannot print the date on the pictures if the recording date is not recorded. • The date may be cut or not be displayed depending on the printer.
VQT0N05Eng.book 61 ページ 2004年11月22日 月曜日 午前10時12分 Playing Music Playing Music Files recorded onto a card with SD-Jukebox can be played on this unit. (You may not be able to play music depending on the file.) ≥ Audio file formats playable on this unit • MPEG2-AAC • WMA • MP3 Install SD-Jukebox from the supplied CD-ROM to the PC. Audio file Record audio files from a music CD to the PC. Connect this unit to the PC.
VQT0N05Eng.book 62 ページ 2004年11月22日 月曜日 午前10時12分 Playing Music (continued) 1 Insert a card which includes audio files. 1 Remote Controller (supplied) 2 Stereo Earphones (supplied) 2 1 2 Connect the remote controller and the stereo earphones. • You cannot listen to the audio on this unit. 3 Slide the Power Switch to [ON]. – The Power Lamp lights in red. Slide the Record/Playback Mode Switch to the playback mode [ ].
VQT0N05Eng.book 63 ページ 2004年11月22日 6 月曜日 午前10時12分 Roll the Jog Ball up or down to select the desired music file. MODE MENU 7 Play music. Remote Controller Playback/Stop Press 1/∫. This Unit Press the Jog Ball. Roll the Jog Ball right or left. (This operation is disabled during playback.) Index Tap : or 9. Fast-forward/ Fast-rewind Keep pressing : or 9. — Press the [MENU] button i: Turns up the volume. and then roll the Jog Ball j: Turns down the volume. right or left.
VQT0N05Eng.book 64 ページ 2004年11月22日 月曜日 午前10時12分 Playing Music (continued) • The sound quality cannot be switched when the menu screen or the 6 pictures multi playback screen is displayed. ∫ To prevent operation mistakes on this unit Press the [MODE] button on this unit for about 2 or more seconds. • The operations with the buttons on the body are disabled (except the Power Switch and Record/Playback Mode Switch) while [HOLD] is displayed.
VQT0N05Eng.book 65 ページ 2004年11月22日 月曜日 午前10時12分 Selecting Playlists You can select and play the playlist set in SD-Jukebox. 1 Press the [MENU] button and then Playlist select [Playlist] with the Jog MENU EXIT Ball. MODE MENU – When you select the item listed on the top, all of the recorded files are played. Playing Repeatedly (Repeat Playback) 1 Press the [MENU] button and then set the item with the Jog Ball. (P18) OFF l Stops playback after the last file is played.
VQT0N05Eng.book 66 ページ 2004年11月22日 月曜日 午前10時12分 Connecting to PC Operating Environment of the Software Windows 98SE Is the installation of the USB driver needed? Me 2000 Macintosh XP Mac OS 9 Mac OS X OS standard driver is available. Needed Are SD Viewer and SD-Jukebox available? Not needed Available Not available ≥ SD Viewer and SD-Jukebox are not compatible with Macintosh.
VQT0N05Eng.book 67 ページ 2004年11月22日 SD Viewer Ver. 3.2E for D-snap (SD Viewer) RAM 月曜日 SD-Jukebox Ver. 4.1 Light Edition (SD-Jukebox) 98SE 64 MB (recommended: Me 128 MB) or more 128 MB or more 2000 128 MB (recommended: XP 256 MB) or more 256 MB or more Free hard disc 400 MB or more space Display 100 MB or more High Colour (16 bit) or more (True Colour (24 bit) or more is recommended.) Desktop resolution of 800k600 or more (1024k768 pixels or more is recommended.
VQT0N05Eng.book 68 ページ 2004年11月22日 月曜日 午前10時12分 Connecting to PC (continued) ≥ Macintosh, Power Macintosh and Mac OS are trademarks of Apple Computer, Inc. of the U.S. ≥ IBM and PC/AT are registered trademarks of International Business Machines Corporation of the U.S. ≥ Intel, Pentium and Celeron are trademarks or registered trademarks of Intel Corporation in the United States and/or other countries. ≥ Even if the system requirements are fulfilled, some personal computers can not be used.
VQT0N05Eng.book 69 ページ 2004年11月22日 月曜日 午前10時12分 ≥ Depending on your computer system, you may experience problems such as being unable to record or use recorded music data. Please note that Matsushita is in no way liable for any music data you lose, or for any other direct or indirect damages. ≥ When you use the CDDB function, the environment for the Internet access is needed.
VQT0N05Eng.book 70 ページ 2004年11月22日 月曜日 午前10時12分 Connecting to PC (continued) Installing the USB Driver When your OS is Windows 2000 or XP, the installation of the USB driver is not required because the OS standard driver is used. 1 Click [USB Driver]. 2 Click [Finish]. • To enable the driver, restart the PC. Installing SD Viewer 70 1 Click [SD Viewer 3.2E]. 2 Click [Next].
VQT0N05Eng.book 3 4 5 71 ページ 2004年11月22日 月曜日 午前10時12分 Click [I agree]. Follow the message on the screen to continue the installation. Click [Finish]. • SD Viewer can be used after restarting the PC. ≥ When the message that informs the absence of Windows Media Player 6.4 or later appears, update Windows Media Player after the installation is completed. ≥ If Internet Explorer 5.5 or later is not installed, install it first and then install SD Viewer. ≥ If Microsoft Data Access Components 2.
VQT0N05Eng.book 72 ページ 2004年11月22日 月曜日 午前10時12分 Connecting to PC (continued) Installing SD-Jukebox 1 Click [SD-Jukebox 4.1]. 2 Click [Next]. 3 Click [Yes]. 4 Enter [Serial No.] (on the backside of the package of the CD-ROM) and [Name], and then click [Next]. 5 72 VQT0N05 Follow the message on the screen to continue the installation.
VQT0N05Eng.book 73 ページ 2004年11月22日 月曜日 午前10時12分 Click [Finish]. 6 • SD-Jukebox can be used after restarting the PC. Connecting to a PC When your OS is Windows 98SE or Me, the USB driver is required for connecting this unit to the PC. (Do not connect this unit to the PC until the USB driver is installed. (P70)) ≥ Turn the PC on beforehand. Turn this unit on and set to the playback mode. 1 • Be sure to insert the charged battery and the card into this unit.
VQT0N05Eng.book 74 ページ 2004年11月22日 月曜日 午前10時12分 Connecting to PC (continued) Insert this unit firmly to the USB cradle all the way. 3 1 • Be sure to use the AC adaptor 1 and the AC mains lead to connect the USB cradle to the power plug. Connect the USB cradle and the PC with the supplied USB cable 2. 4 2 – [ACCESSING PC] indication appears. • If the [ACCESSING PICTBRIDGE/ PTP] indication is displayed, once disconnect the USB cable and then confirm the setting in Step 2.
VQT0N05Eng.book 75 ページ 2004年11月22日 月曜日 午前10時12分 Checking that This Unit Is Properly Recognised by the PC If this unit is not properly recognised, check the connection again. ∫ In the case of Windows 1 Check that [Removable Disk] is added to [My Computer]. • The drive name (E: etc.) varies depending on the PC used. ∫ In the case of Macintosh 1 Check that the icon of [untitled] or [NO_NAME] disc is displayed on the desktop.
VQT0N05Eng.book 76 ページ 2004年11月22日 月曜日 午前10時12分 Connecting to PC (continued) Disconnecting the USB Cable Safely 1 Double-click the [ on the task tray. 2 Select [USB Mass Storage Device] and then click [Stop]. 3 Check that [MATSHITA SD Multi Camera USB Device] is selected and then click [OK]. 4 ] icon Click [Close] to close the dialogue. • You can disconnect the USB cable safely. ≥ Depending on the OS (Windows 98SE or Me, etc.), the icon for safe removal may not be displayed in the task tray.
VQT0N05Eng.book 77 ページ 2004年11月22日 月曜日 午前10時12分 Folder Structure of the Card Used for This Unit 100_PANA DCIM MISC SD Memory Card SD_AUDIO SD_VIDEO PRL001 SD_VOICE SD_VC100 ≥ Files recorded with this unit are saved in the following folders. Folder name File name (example) Picture 100_PANA P1000001.JPG MPEG4 PRL001 MOL001.ASF Voice SD_VC100 MOB001.VM1 Audio SD_AUDIO AOB001.SA1 ≥ Do not delete the folders in the card on the PC. You may not be able to read the card with this unit.
VQT0N05Eng.book 78 ページ 2004年11月22日 月曜日 午前10時12分 Connecting to PC (continued) Using Files in a Card on a PC ([Picture] • [MPEG4]) 1 Connect this unit to the PC. (P73) Open [My Computer] and double-click the folder in the [Removable Disk] which includes files. 2 • When your OS is Macintosh, double-click the folder in the [untitled] or [NO_NAME] icon. 3 P1000001 .JPG P1000002 .JPG P1000003 .JPG Drag and drop files to the destination folder (the hard disc of the PC).
VQT0N05Eng.book 79 ページ 2004年11月22日 月曜日 午前10時12分 • You can also browse [Picture] files and [MPEG4] files with SD Viewer (supplied). File type Software used for playing files Windows Macintosh Picture Depends on the setting on the PC. MPEG4 Windows Media Player 6.4 or later Windows Media Player for Macintosh ≥ When you use Windows PC to play [MPEG4] files (ASF format) recorded with the [Quality] set to [XF] on a PC, you need to install [MPEG4 Decoder Plug-in] from the Setup menu.
VQT0N05Eng.book 80 ページ 2004年11月22日 月曜日 午前10時12分 Connecting to PC (continued) Using SD Viewer ∫ Starting SD Viewer 1 Select [Start]> [All Programs]> [Panasonic]> [SD Viewer for D-snap]> [SD Viewer for D-snap]. • The indications on the screen may vary depending on OS and settings in your PC. Accordingly, the operation may be different from the one described above. ∫ Capturing files with SD Viewer in PC Connect this unit to the PC 1 (P73) and then click [Acquire].
VQT0N05Eng.book 81 ページ 2004年11月22日 月曜日 午前10時12分 ∫ Reading the operating instructions of SD Viewer Select [Help]>[Manual]. 1 • Adobe Acrobat Reader is required. (P83) ∫ Closing SD Viewer 1 Select [File]>[Exit]. • You can also close SD Viewer by clicking [k] on the upper right corner of the screen. ≥ Using SD Viewer • You can capture [Picture] files and [MPEG4] files in the card into the PC. • You can classify pictures by recording date or keywords. • You can print recorded pictures with date.
VQT0N05Eng.book 82 ページ 2004年11月22日 月曜日 午前10時12分 Connecting to PC (continued) Using SD-Jukebox ∫ Starting SD-Jukebox 1 Select [Start]> [All Programs]> [Panasonic]> [SD-JukeboxV4]> [SD-JukeboxV4]. • The indications on the screen may vary depending on OS and settings in your PC. Accordingly, the operation may be different from the one described above. • When SD-Jukebox is started for the first time, the file import screen (the screen to import audio files from the hard disk to SD-Jukebox) appears.
VQT0N05Eng.book 83 ページ 2004年11月22日 月曜日 午前10時12分 ∫ Closing SD-Jukebox 1 Click [t] on the upper right corner of the screen of SD-Jukebox. ≥ Using SD-Jukebox • You can save your favourite titles on the PC from a music CD or create a playlist of audio files. • You can save audio files or playlists saved on the PC to the card. • For details of the operation procedures, refer to the operating instructions of SD-Jukebox (PDF file). ≥ Do not disconnect the USB cable while SD-Jukebox is used.
VQT0N05Eng.book 84 ページ 2004年11月22日 月曜日 午前10時12分 Connecting to PC (continued) Uninstalling the Software If you do not need the software installed any more, uninstall (delete) it from the PC. 1 Select [Start]>[Control Panel] and then click [Add or Remove Programs]. 2 Select the software you want to delete and then click [Change/Remove]. ≥ Depending on the OS, the uninstallation procedure may vary. For details, refer to operating instructions of the OS used.
VQT0N05Eng.book 85 ページ 2004年11月22日 月曜日 午前10時12分 Cautions for Use This Unit Keep this unit away from magnetised equipment (such as a microwave oven, TV, video game equipment, etc.). ≥ If you use this unit on or near a TV, images and sounds may be disturbed due to electromagnetic wave radiation. ≥ Do not use near cell phone because doing so may cause noise to adversely affect the picture and sound.
VQT0N05Eng.book 86 ページ 2004年11月22日 月曜日 午前10時12分 Cautions for Use (continued) When carrying this unit, take care not to drop or hit it. Do not carry this unit in a pocket. ≥ The SD Multi Camera body may be destroyed by a strong shock, and it may cause a malfunction of this unit. Store this unit in the carrying case (supplied). Do not use benzine, thinner or alcohol for cleaning this unit. ≥ Remove the battery before cleaning this unit.
VQT0N05Eng.book 87 ページ 2004年11月22日 月曜日 午前10時12分 The Battery Lithium ion battery is compact and high-capacity battery. However, when the battery is cooled under low temperature (10xC or less) such as outside in winter, the available time of the battery becomes shorter and this unit may not work. In this case, warm the battery and insert it into this unit just before you use this unit. (If you use a pocket warmer, do not let the pocket warmer touch with the battery.
VQT0N05Eng.book 88 ページ 2004年11月22日 月曜日 午前10時12分 Cautions for Use (continued) Cautions to store the battery ≥ Store the battery in a cool and dry place with a relatively stable temperature. (Recommendable temperature: 15oC–25oC Recommendable humidity: 40%–60%) ≥ Extremely high or low temperature will shorten the life of the battery. ≥ If the battery is kept in hot, humid, smoky or dusty places, the terminals may rust and cause malfunctions.
VQT0N05Eng.book 89 ページ 2004年11月22日 月曜日 午前10時12分 When the charge lamp blinks approx. every 0.5 second (lighting approx. 0.25 second, turning off approx. 0.25 second): ≥ The room or the battery temperature is extremely high or low. Wait until the room or the battery temperature becomes adequate and then recharge the battery. If you still cannot charge the battery, there may be defective on this unit, the battery or the AC adaptor. Consult the dealer.
VQT0N05Eng.book 90 ページ 2004年11月22日 月曜日 午前10時12分 Cautions for Use (continued) When condensation has taken place ≥ Turn this unit off and leave this unit in this condition for about 1 hour. When this unit becomes close to the ambient temperature, the condensation disappears naturally. ≥ When you move this unit from a cold place to a hot place, put the camera into plastic bag and then take it out after the temperature of this unit becomes close to the ambient temperature to avoid condensation.
VQT0N05Eng.book 91 ページ 2004年11月22日 月曜日 午前10時12分 Card When the Card Access Lamp is blinking (or when the message [ACCESSING CARD] appears), do not open the Card/Battery Door to remove the card, turn this unit off, or subject it to vibration or impact. Do not leave the card in places where there is high temperature or direct sunlight, or where electromagnetic waves or static electricity are easily generated. Do not bend, drop, or subject it to strong vibration.
VQT0N05Eng.book 92 ページ 2004年11月22日 月曜日 午前10時12分 Cautions for Use (continued) Format ≥ Format a card on this unit. If you format the card using a PC, use SD-Jukebox. Particularly for the card containing audio files, check in the card using SD-Jukebox with which the audio files were recorded, then format it. (For details, read the operating instructions of SD-Jukebox.) ≥ Do not use a PC (Explorer) to format a card. Otherwise, it may not be recognised by this unit.
VQT0N05Eng.book 93 ページ 2004年11月22日 月曜日 午前10時12分 Others Screen Display ∫ Screen Display in Recording 1 2 3 4 5 6 7 2016 016 30 0h10m10s 21/12/2004 2.
VQT0N05Eng.book 94 ページ 2004年11月22日 月曜日 午前10時12分 Others (continued) ∫ Screen Display in Playback 1 Playback mode (P43) 2 Counter display 3 Repeat playback (P47) 7 4 Picture quality (P31) 2016 016 0h10m10s 100-0125 5 Picture size (P31) 6 Battery remaining (P17) 7 Folder/File number 8 Stop/Play/Reading display 21/12/2004 9 Lock setting (P49) 12:00 2 10 No.
VQT0N05Eng.book 95 ページ 2004年11月22日 月曜日 午前10時12分 Messages The confirmation/error message will be displayed on the LCD Monitor. Messages EMPTY BATTERY Countermeasures The battery remaining is insufficient. Recharge the battery. (P14) Insert the battery into this unit correctly. (P12, 13) INSERT BATTERY This message also appears when the battery is excessively discharged. Charge the battery. NO CARD Insert the card correctly. (P12, 13) MultiMediaCard is not available.
VQT0N05Eng.book 96 ページ 2004年11月22日 月曜日 午前10時12分 Others (continued) Messages CANNOT SET FILE Countermeasures Select the still picture recorded by this unit. Switch the Record/Playback Mode Switch to the SET TO PLAY MODE playback mode [ ] when connecting this unit to PC or printer. (P55, 73) USE BOTH AC ADAPTOR AND BATTERY Connect the AC adaptor when connecting this unit to PC or printer. (P55, 73) TURN POWER OFF AND ON Turn this unit on again.
VQT0N05Eng.book 97 ページ 2004年11月22日 Q (Question) A (Answer) The colour or the brightness of the LCD Monitor changes. 月曜日 午前10時12分 The colour or the brightness of the screen may look different under fluorescent light. The LCD Monitor is Adjust the brightness of the LCD Monitor properly. too bright or dark. (P21) Cannot record. Is the card inserted? You cannot record pictures when the write-protect switch is slid toward [LOCK].
VQT0N05Eng.book 98 ページ 2004年11月22日 月曜日 午前10時12分 Others (continued) Q (Question) A (Answer) The flash cannot be Is the flash set to [Flash off]? Check the flash mode. activated. (P36) The pictures recorded with a flash are dark. Is the flash covered with your finger? Is this unit too far away from the subject? The colours of the picture recorded with the flash are not similar to the subject in real life.
VQT0N05Eng.book 99 ページ 2004年11月22日 Q (Question) A (Answer) 月曜日 午前10時12分 When connecting to a PC, images cannot be transferred. Is this unit connected to the PC correctly? (P73) Does the PC recognise this unit properly? (P75) The pictures cannot be printed with printers supporting PictBridge. Set this unit to the playback mode and then check if [Setup]>[Connection (USB)]>[PictBridge] is selected in the menu. (P55) Black belts appear on the top and bottom of the printed pictures.
VQT0N05Eng.book 100 ページ 2004年11月22日 月曜日 午前10時12分 Others (continued) Q (Question) A (Answer) If you do not use this unit for a long period of time, the clock may be reset. When the screen of clock The clock is not set setting appears, set the clock again. correctly. If you record pictures without the clock setting, the date is recorded as [1/1/2000 0:00]. The retouch software does not start even if retouch files (extension “.ped”) are clicked on Windows Explorer etc.
VQT0N05Eng.book 101 ページ 2004年11月22日 月曜日 午前10時12分 Specifications ∫ SD Multi Camera Power source Power consumption Image sensor 1/3.2q CCD Interline type RGB primary colour filter Number of effective pixels Approx. 3,100,000 pixels Scanning Interlace scanning Standard illumination 3000 lx Minimum required illumination 80 lx Focal length 4.5 mm 35 mm equivalent 34.8 mm Digital zoom 4k F value 4.0 Shortest image distance Approx. 60 cm from Lens (Macro: Approx.
VQT0N05Eng.book 102 ページ 2004年11月22日 月曜日 午前10時12分 Specifications (continued) Audio input Monaural microphone (built-in) Audio output Earphone output: 3.5 mWi3.5 mW Load impedance 16 h Dimensions Approx. 53.2 mm (W)k103.0 mm (H)k14.0 mm (D) (Thinnest part 9.9 mm) Body weight Approx. 59 g (without battery pack and SD Memory Card) Body weight in operation Approx. 75 g (with battery pack and SD Memory Card) Operating temperature 0–40oC Operating humidity 10–80% ∫ USB cradle Input Output DC 4.8 V DC 4.
VQT0N05Eng.book 103 ページ 2004年11月22日 月曜日 午前10時12分 Before opening the CD-ROM package, please read the following. End User License Agreement You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
VQT0N05Eng.book 104 ページ 2004年11月22日 月曜日 午前10時12分 Matsushita Electric Industrial Co., Ltd. Web site: http://www.panasonic.co.