Operating instructions

2
34
OFF
/
ON
TEMP
TIMER/CLOCK
MODE
QUIET/
POWERFUL
FAN SPEED
MODE
CHECK RESET
AIR SWING
OFF/ON
CANCELCLOCK
SET
SELECTUP
DOWN
AC RC
SETTING CURRENT DAY AND TIME
The current day and time need to be set when you turn on the power for the fi rst time or after a long time has
elapsed since the power was last turned on.
The current time becomes the standard time for all the Timer operations.
Set the current time and day accurately.
Example: Current Day is Wednesday and Current Time is 8:00
1 Turn on the power supply
OFF
/
ON
2 Press
CLOCK
TIMER/CLOCK
MODE
OFF/ON
CANCELCLOCK
SET
SELECTUP
DOWN
MON
“MON” and “12:00” will be
blinking
3 Select Current Day
Press
UP
or
DOWN
to select current day. (Refer to the above example; select WED)
To confi rm the selected day, press
SET
.
4 Select Current Time
Press
UP
or
DOWN
to select current time. (Refer to the above example; select 8:00)
To confi rm the selected time, press
SET
.
Note:
- Press
UP
to increase or
DOWN
to decrease (1-minute step) or hold the button to change the time
faster.
- If
UP
or
DOWN
is not pressed for 30 seconds during the day or time setting or if
SET
is pressed, the
setting at that moment is confi rmed and setting will end.
WED
Final CLOCK Display
“:” will be blinking
User Manual
Wired Remote Control
F566767
01/13
OFF
/
ON
TEMP
TIMER/CLOCK
MODE
QUIET/
POWERFUL
FAN SPEED
MODE
CHECK RESET
AIR SWING
OFF/ON
CANCELCLOCK
SET
SELECTUP
DOWN
AC RC
CZ - RD52CP
PRODUCT OVERVIEW PRODUCT OVERVIEW
7
11
14 15 17
19
18
20
2
4
5
3
109
6
8
1
12
13
1
Operation LED
11
Remote Control Reset Button
2
OFF/ON Button
12
OFF Indicator
3
Temperature Setting Button
13
Operation Mode Selection Indicators
4
Operation Mode Button
14
Timer/Clock Setting Display
5
Fan Speed Button
15
Fan Speed Display
6
Airfl ow Direction Selection Button
16
Airfl ow Direction Setting Display
7
Quiet/Powerful Operation Button
17
Temperature Setting Display
8
Timer Setting Button Group
18
Quiet Operation Indicator
9
Check Button
19
Powerful Operation Indicator
10
Air Conditioner Reset Button
20
System Error Display
16
OPERATIONS OPERATIONS REMOTE CONTROL PREPARATION REMOTE CONTROL PREPARATION
1 TO TURN ON OR OFF THE UNIT
OFF
/
ON
• Please be aware of the OFF indication on the remote control display to prevent the unit from
starting/stopping improperly.
• For normal operation, OFF indicator shown on remote control display when the unit is turn off.
2 TO SET TEMPERATURE
TEMP
• Selection range: 16°C ~ 30°C.
3 TO SELECT OPERATION MODE
MODE
AUTO mode - For your convenience
• Unit selects operation mode according to temperature setting, outdoor and room temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling operation.
• During soft dry operation, the indoor fan operates at a low fan speed.
• The louvers movement might not align with the remote control display.
4 TO SELECT FAN SPEED (5 options)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted according to the operation mode.
5 TO ADJUST VERTICAL AIRFLOW DIRECTION (5 options)
AIR SWING
• Keeps the room ventilated.
• If AUTO is set, the louvers swing up/down automatically.
• In heat mode, the air blows horizontally for a while, then starts to blow downwards.
6
POWERFUL NORMALQUIET
QUIET/
POWERFUL
QUIET - TO ENJOY QUIET ENVIRONMENT
• This operation reduces airfl ow noise.
POWERFUL - TO ACHIEVE TEMPERATURE QUICKLY
Panasonic Corporation
Website: http://panasonic.net/
ENGLISH
TABLE OF CONTENTS
Product Overview
Remote Control Preparation
Operations
How to Select the Timer
Daily Timer Setting
Weekly Timer Setting
Troubleshooting
2
3
4
5
6
7~8
8
© Panasonic HA Air-Conditioning (M) Sdn. Bhd. 2008.
Unauthorized copying and distribution is a violation
of law.
F566767-OSTH0901-01_1EN.indd 1F566767-OSTH0901-01_1EN.indd 1 1/13/2009 11:06:31 AM1/13/2009 11:06:31 AM