CY-BT200U Hands Free Kit with Audio Streaming featuring Bluetooth® technology Kit mains libres avec streaming audio et technologie Bluetooth® Juego de manos libres con Audio Streaming y tecnología Bluetooth® CY-BT200U Operating Instructions Manuel d’instructions Manual de Instrucciones ¡Please read these instructions (including “Limited Warranty” and “Customer Services Directory”) carefully before using this product and keep this manual for future reference.
Safety Information ■ Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual. Warning This pictograph intends to alert you to the presence of important operating instructions and installation instructions.
❑ Use the proper power supply (12 V). This product is designed for operation with a negative grounded 12 V DC battery system. Never operate this product with other battery systems, especially a 24 V DC battery system. ❑ Do not disassemble or modify the unit. Do not disassemble, modify the unit or attempt to repair the product yourself. If the product needs to be repaired, consult your dealer or an authorized Panasonic Servicenter. ❑ Do not use the unit when it is out of order.
Safety Information (continued) Warning ❑ Check for piping, gasoline tank, electric wiring, and other items before installing the product. If you need to open a hole in the vehicle chassis to attach or wire the product, first check where the wire harness, gasoline tank, and electric wiring are located. Then open the hole from outside if possible. ❑ Never install the product in a location where it interferes with your field of vision.
Observe the following cautions when using this unit. ❑ Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. ❑ This unit is designed for use exclusively in automobiles. ❑ Do not expose the unit to direct sunlight or excessive heat. Otherwise these will raise the interior temperature of the unit, and it may lead to smoke, fire, or other damage to the unit.
Safety Information (continued) Caution ❑ Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury. ❑ Make sure that wiring is completed before installation. ❑ To prevent damage to the unit, do not connect the power connector until the whole wiring is completed.
Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.
Customer Services Directory U.S.A. Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/support or, contact us via the web at: http://www.panasonic.com/contactinfo You may also contact us directly at: 1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
WARRANTY SERVICE FOR PRODUCT OPERATION ASSISTANCE, please contact: Our Customer Care Centre: Telephone #: 1-800 #: Fax #: Email link: IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid, adequately insured and preferably in the original carton. Include details of the defect claimed, and proof of date of original purchase. English CANADA (905) 624-5505 1-800-561-5505 (905) 238-2360 “Contact Us” on www.panasonic.
Limited Warranty During the “Labor” warranty period, there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must carry in or mail in your product pre paid during the warranty period. If non-rechargeable batteries are included, they are not warranted. This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold “as is”.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Servicenter.
Components Operating Instructions Microphone with Bracket (5 m) (YFM264C099ZA) (L0FBBB000005) Q'ty: 1 Product Registration Card Q'ty: 1 System-up connecting cable (3 m) (YEAJ071812A) Q'ty: 1 Customer Care Plan Q'ty: 1 Double-sided Tape (YFX994C128ZA) Q'ty: 1 CY-BT200U Main Unit Q'ty: 2 Double-sided Tape (YFX994C129ZA) Q'ty: 1 Switch Unit (2 m) Q'ty: 1 Cable Clamp (ASMYSW100N) Q'ty: 1 Note: ¡ The number in parentheses underneath each accessory part name is the part number for maintenance and s
Safety Information ............................ 2 Customer Services Directory .......... 8 Limited Warranty ............................ 10 Components ................................... 12 Introduction .................................... 14 Glossary .......................................... 16 Names of Controls and Functions ... 17 Preparation (Bluetooth Audio) ....... 18 Basic Operation (Bluetooth Audio) .. 19 Preparation (Hands-Free Kit) ......... 20 Basic Operation (Hands-Free Kit) ....
Introduction Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company.
English ❑ Installation sample Microphone with Bracket Switch Unit Head unit Main Unit CY-BT200U 15
Glossary Bluetooth® Remote Control Profile) The Bluetooth word mark and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by Matsushita Electric Industrial Co.,Ltd. is under license. Other trademarks and trade name are those of their respective owners. Link key Bluetooth Bluetooth is a name of the wireless communication technology for the mobile information equipment such as portable PCs, PDAs, mobile phones, etc.
Main unit English Names of Controls and Functions Microphone with Bracket Switch Unit Status indicator (Blue LED) lights: Call waiting/Talking stays out: Not connected blinks rapidly: Receiving a call blinks slowly: Pairing/ Reconnecting CY-BT200U [Hang-on] /Blue LED [Hang-up] /Red LED System-up connector To a Head unit or a port of Expansion module Switch Unit connector To the Switch Unit Microphone connector To the microphone with Bracket 17
Preparation (Bluetooth Audio) Perform electrical wiring for CY-BT200U (this unit) and install it. (\ page 26, 27) Refer to the individual instructions for the devices to be connected as well. q Items for preparation ¡ CY-BT200U (this unit) ¡ Bluetooth-ready audio device Note: For the models to be supported, visit the Web Site at: http://www.panasonic.com (Refer to the description regarding Car Audio/AV.
The connected Bluetooth-ready device is operable from the head unit. Refer to the Operating Instructions of the head unit for further information. Note: Some audio devices may be inoperable from the head unit. ❑ Track selection [7] (TRACK): Next track [6] (TRACK): Preceding track (press twice) ❑ Automatic reconnection English Basic Operation (Bluetooth Audio) This unit stores the data of the device that was connected to this unit last time.
Preparation (Hands-Free Kit) Perform electrical wiring for CY-BT200U (this unit) and install it. (\ page 26, 27) Refer to the individual instructions for the devices to be connected as well. q Items for preparation ¡ CY-BT200U (this unit) ¡ Bluetooth-ready mobile phone Note: For the models to be supported, visit the Web Site at: http://www.panasonic.com (Refer to the description regarding Car Audio/AV.) We do not guarantee that all the functions of this unit are available on all mobile phones.
t Volume adjustment Position the microphone appropriately to catch sounds satisfactorily. The direction of the sun visor may change the volume. Note: The volume is adjustable only when receiving calls. r Communication test on paired mobile phone Check whether the paired mobile phone is available. (Call to the paired mobile phone.) English e Microphone positioning (head unit) q Adjust the ring volume. The ring tone may come from the mobile phone depending on your head unit or mobile phone.
Basic Operation (Hands-Free Kit) Note: Caution This unit is designed only for receiving calls with taking account of safety. No call can be made with this unit. (But a call-back call can be made.) ¡ Bluetooth connection will make the battery life of mobile phone shorter. ¡ Depending upon the mobile phone, the display backlight of a mobile phone remains on when the ignition switch is in the ACC ON position.
❑ Calling back A callback call can be made. However, the callback function is disabled after disconnecting Bluetooth communication. (e.g. communication disconnection between the Hands Free Kit with Audio Streaming featuring Bluetooth® technology and mobile phone, and communication disconnection by turning off the power of the Head unit) Refer to the Operating Instructions of the head unit for further information. Note: Some mobile phones cannot display the telephone number of an incoming call or callback.
Installation Warning ❑ Installation Hardware ¡This installation information is designed for professional installers with knowledge of automobile electrical safety systems and is not intended for non-technical, do-it-yourself individuals. It does not contain instructions on the electrical installation and avoidance of potential harm to air bag, anti-theft and ABS braking or other systems necessary to install this product.
¡ Make sure that wiring is completed before installation. ¡ Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury. 1 Remove the cable from the battery negative terminal. 2 Connect all the cables of CY-BT200U (this unit). 3 Secure the Main unit q, Switch Unit w and Microphone with Bracket e.
Wiring Connection between CY-BT200U (this unit) and the head unit Microphone with Bracket e Main Unit q Switch Unit w CY-BT200U ■ How to disconnect cord with lock Disconnect the cord while pressing the lock section in the arrow direction. ● Pulling the cord with excessive force may cause damage to the cord. ● Be sure to unlock the connection portion when disconnecting the cord. System-up connecting cable r Head unit (e.g.
English Connection among CY-BT200U (this unit) and two or more devices Head unit (e.g.
Troubleshooting If You Suspect Something Wrong Check and take steps as described below. If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic Servicenter. The product should be serviced only by qualified personnel. Please refer the checking and the repair to professionals. Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking.
Possible cause a Possible solution English Problem There is another wireless device near the unit. ● Switch off the wireless device or keep it away from these Hands Free Kit with Audio Streaming featuring Bluetooth® technology. The distance between this unit and the Bluetooth-ready device is too long, or the Bluetooth-ready device is hidden behind a metallic object from this unit. ● Change the location of the Bluetooth-ready device. ✽ Consult your dealer to move the main unit.
Troubleshooting (continued) ■ Hands-Free Kit Problem Possible cause a Possible solution The head unit is set to OFF. ● Turn on the power of the head unit. CY-BT200U (this unit) is set to the disconnection mode. ● Cancel the disconnection mode. CY-BT200U (this unit) cannot receive a call. Your mobile phone is out of service area. ● Drive your car to the service area of your mobile phone. Bluetooth connection is disconnected. (The blue indicator does not light up.) ● Establish Bluetooth connection again.
Possible cause a Possible solution English Problem There is another wireless device near the unit. ● Switch off the wireless device or keep it away from these Hands Free Kit with Audio Streaming featuring Bluetooth® technology. The voice quality of hands-free is low (Distortion, noise etc.). The distance between CY-BT200U (this unit) and the mobile phone is too long or too short. ● Keep a proper distance between CY-BT200U (this unit) and the mobile phone.
Troubleshooting (continued) Problem Talking volume is low or noisy.(claim from the person on the other end of the line) Possible cause a Possible solution Distance between the microphone and the talker is too long or the connection of microphone is not proper. ● Make the microphone closer to the talker. Or connect the microphone’s connector properly. The window is open, or the air conditioner blows air to the microphone.
Possible cause a Possible solution English Problem The Switch Unit is disconnected. ● Connect the Switch Unit securely and properly. The CY-BT200U (this unit) is inoperable. Audio output comes out of the mobile phone after reconnection. The power of the Head unit is set to off. ● Turn on the power of the Head unit. For other than the above ● Turn on and off the power of the Head unit. ● Toggle the ignition switch between ACC ON and ACC OFF of the car, or turn on and off the mobile phone.
Specifications Power supply Current consumption Communication Frequency Number of channels Channel width Communication mode RF output Service area Applicable Bluetooth version Supported profile Microphone impedance Dimensions (W x H x D) Weight 34 :DC 12 V (11 – 16 V), test voltage 14.4 V, negative ground (Supplied from a head unit or a Expansion Module) :Less than 1.0 A :2,402 MHz – 2,480 MHz :79 channels :1.0 MHz :Frequency hopped spread spectrum communication :–1 dBm (0.8 mW) :Within 10 m :Ver. 1.
English Note: ¡ Specifications and design are subject to modification without notice due to improvements. ¡ Some figures and illustrations in this manual may be different from your product.
Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 http://www.panasonic.com Panasonic Sales Company, Division of Panasonic Puerto Rico, Inc. (“PSC”) Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 http://www.panasonic.com YFM264C099ZA © 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved Panasonic Canada Inc.