Operating Instructions

12
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular intervals.
Dirty unit may cause malfunction and you may
see error code “H 99”. Please consult authorised
dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fi n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Human activity sensor
Do not hit or violently press or poke it with a
sharp object. This can lead to damage and
malfunction.
Outdoor unit
Make sure the air outlet of the
outdoor unit is not blocked by
fallen leaves or snow.
Clear any blockage from the
drain pipe.
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damage to
the fi lter surface.
• Dry the fi lters thoroughly under shade,
away from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter Attach air fi lter
Insert into the unit
Front panel
Wash gently and dry.
Remove the front panel Close it securely
1
Release the hooks at
both ends.
2
Pull out and lift up.
1
Insert at
both sides.
2
Push in.
3
Close down.
4
Press both ends and center of the front panel.
Indoor unit
Aluminium fi n
Front panel
Air fi lters
Human activity
sensor
ACXF55-04930_01EN.indd 12ACXF55-04930_01EN.indd 12 12/22/2016 9:08:12 AM12/22/2016 9:08:12 AM