Operating instructions

E
N
G
L
I
S
H
34
CQ-DVR909U
53
The extent to which the volume is lowered depends on the MUTE/ATT setting. (➡ page 49)
Lowering the Volume Temporarily (Mute/Attenuator)
Multi Source Selector
It is possible to simultaneously listen to different sources on the front and rear speakers
(excluding the tuner).
LS
LR
RS
C
F
MAIN
S W
.
R
FRONT MAIN
LS
LR
RS
C
F
MAIN
S W
.
R
Regular mode
LS
LR
RS
C
F
MAIN
S W
.
R
REAR MAIN
Listening to Separate Sources on the Front and Rear Speakers
Normal volume
Volume goes to “0”
(silence).
For front speaker operation
For rear speaker operation
When MUTE is set:
Normal volume
Volume goes to 1/10 of
what it was.
When ATT is set:
MUTE
≥ When Mute/Attenuate is “ON”, “MUTE” blinks and you can not operate except for some buttons.
F / R
≥ “ MAIN” or “ MAIN” lights (or blinks
while an operation is in progress).
≥ No sound is output from the center speaker
and the subwoofer.
≥ The following settings can be made for the
front and rear speakers separately:
• Volume
• Source
• Sound settings (loudness, bass, treble,
balance) (➡ pages 43, 45)
RF
≥ The volume, source, and sound settings for
the front become the settings for the whole
system.
≥ If the F/R mode is cancelled when the front
mode is off, the power turns off.
≥ Turning off the power does not cancel the
separate front/rear settings.
To cancel:
F / R
Notes:
≥ The separate front/rear settings are not valid
when the unit is in TUNER mode.
≥ Pressing [MUTE](ATT) mutes the volume of
both sets of speakers to “0” (or “1/10”).
≥ The speaker output setting automatically
becomes “DOWN MIX ON”. (➡ page 43)
MUTE OFF
MUTE ON
ATT OFF
ATT ON
FRONT MAIN
REAR MAIN
Press
Press
Hold (2 seconds)