English Electronic Board [Stand (option)] [Wall-mounting (option)] Stand and Wall-mounting kit are optional. 中 文 Operating Instructions With Installation Manual (for qualified service personnel) UB-7320 Operating Instructions Model No. English . . . . . . . . . . . . . . . . . 1–42 中 文 . . . . . . . . . . . . . . . . . 43–83 Installation Manual • To assemble this unit, please refer to the Installation Manual.
Thank you for purchasing the Panasonic Electronic Board. For optimum performance and safety, please read these instructions carefully. Record these items for future reference Model number: _________________________ Date of purchase: ________________________ Serial number: _________________________ Dealer’s name: __________________________ Dealer’s address: ______________________________________________________________________ Tel: Accessories • • • • Markers (red, black, and blue) .
English Table of Contents Page For Your Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before You Start Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 • CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 • Control panel . . . . . . . . . . . . . . . . .
For Your Safety For Your Safety English CAUTION: TO PREVENT RISK OF ELECTRIC SHOCK HAZARD, DO NOT REMOVE THE COVER OF THIS PRODUCT, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE. THE SOCKET-OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY ACCESSIBLE. The product should be used only with the power cord that is supplied by the manufacturer.
English Precautions Precautions Do not position the electronic board in a location where it is unstable. Do not put drinks, other liquids or heavy items on the tray or screen. After installing or moving the electronic board, lock the casters and set the fall-prevention extension legs. Operating Instructions Never remove the cover, take apart or modify the product. This will void the warranty.
Precautions Do not lean against the screen or on the cover (lower), even if the electronic board is mounted on the wall. CHOKING HAZARD Keep the marker’s cap out of reach of children to prevent swallowing. Have the unit installed, removed and disposed of only by qualified service personnel. When the unit will no longer be used, in order to prevent it from falling, do not leave the unit installed, but remove it. If the unit falls, it can cause injury.
English Precautions Installation • Do not install the unit where it may be exposed to direct sunlight, near heating equipment, or near air-conditioning vents as this may cause stretching and/or discoloration of the screen. • Do not install the unit in strong sunlight or strong lighting. Proper copying may become impossible. • Do not install the unit in locations where the temperature may change suddenly as this may disable the unit’s ability to make copies.
Part Names and Functions Part Names and Functions Scanner Screen One screen (with no ruled lines) of four screens can also be used for a projector (see page 12). Printer Tray Stand The stand is optional. Output Port Control Panel (See page 9 for details.) Power Switch USB Connector (ON) (See page 14.) (OFF) AC Inlet Printer Door Open this door to load copy paper or to remove jammed paper. (See pages 10, 13.
English Part Names and Functions ■ Control panel Reverse Key Contrast Indicator Advance Key Contrast Key Copy Key Name Description Contrast Indicator This lamp indicator displays the printing contrast used during copying. Indicator off: Normal printing contrast Indicator on: Darker than normal printing contrast Contrast Key Each time this key is pressed, the unit will alternate between normal and dark contrast modes (Normal/Dark). Copy Key This key causes the screen to be copied.
Loading Copy Paper Note Loading Copy Paper 1 • Use copy paper roll with a core diameter of 25.4 mm (1 inch) or more. Using a copy paper roll with a smaller core could cause paper jams. Set the power switch to on ( I ). • “ ” will flash on the Multi-Copy/Error Indicator when copy paper has run out. • The screen will move to home position and stop. 4 Pass the paper over the paper feed roller and under the cutter cover, then through the output port about 4 cm.
Note Making Copies This section describes how to copy text and illustrations drawn on the screen. 1 • While copying, do not touch the paper, otherwise the paper may jam. • Text or images in shades of yellow will not copy. Set the power switch to on ( I ). • “ ” will light on the Multi-Copy/Error Indicator to indicate that the unit is ready to copy. • The screen will move to home position and stop. ■ Copy types and procedures [A] Copying the front of the screen Operating Instructions 1) Press *1.
Using the Projector Screen Using the Projector Screen One of four screens of this electronic board can also be used as the projector screen. The screen has no ruled lines so the projected image is easy to see. 1 Press or more than 2 seconds to move the screen to the projector screen. • “0” is displayed on the Multi-Copy/Error Indicator while the screen advances to the projector screen. or Press or to move the screen to the screen with no ruled lines. 2 Project an image on the screen.
4 Paper Jams To release jammed paper: 1 Push the door open button and open the printer door. English Paper Jams Pass the paper over the paper feed roller and under the cutter cover, then through the output port about 4 cm. (Refer to step 4 on page 10.) In case paper cannot go through, just put the paper on the paper feed roller and insert the top of the paper in the cutter cover as shown in the figure.
Computer Interfacing Computer Interfacing Drivers and software must be installed in your computer to use Board Image Capture, Quick Image Navigator, Panasonic-DMS, printer and TWAIN driver. ■ System requirements Computer CPU Interface IBM® PC/AT® or compatible machine with a CD-ROM drive Pentium® II or higher processor USB 2.0 or USB 1.1*1 OS Windows® 98*2 / Windows Me*3 / Windows 2000*4 / Windows XP*5 / Windows Vista®*6 (64-bit editions are not supported.
■ Installing Drivers / Board Image Capture 6 English Computer Interfacing When the following window appears, check that the electronic board is not connected to your computer and click [OK]. The USB, printer, TWAIN driver and Board Image Capture are installed in your computer by following procedures. Note • Do not yet connect a USB cable to the electronic board. Power on your computer and start Windows*1.
Computer Interfacing 8 • If the wizard window is displayed to select the file (##.inf) for the printer driver in Windows XP, select “windows\inf\oem##.inf”. • If the wizard window is displayed to connect to the Windows Update in Windows XP SP2, select [No]. • If the warning dialog is displayed in Windows 2000 / Windows XP, select [Yes] or [Continue Anyway] to continue the installation. In Windows Vista, no warning window is displayed and installation will continue.
2 3 In the Control Panel, double-click Add/ Remove Programs (Windows XP: Add or Remove Programs, Windows Vista: Uninstall a program). Select the software you want to remove, then remove it. • To remove the USB and TWAIN driver, select Panaboard UB5-7 Driver. To remove Board Image Capture, select Panasonic Board Image Capture. To remove Quick Image Navigator, select Panasonic Quick Image Navigator.
Computer Interfacing Note • Board Image Capture cannot be started while the Panaboard Operation Panel is displayed using Quick Image Navigator or Panasonic-DMS. To start Board Image Capture, click [Close] in the Panaboard Operation Panel window, then start Board Image Capture. • To stop Board Image Capture from starting automatically when the Panaboard is connected, follow the steps below: 1) Connect your computer and Panaboard with the USB cable.
■ Panaboard Operation Panel English Computer Interfacing It is possible to perform the same operations as with the electronic board control panel (page 9) from the following Panaboard Operation buttons. Note • While the Panaboard Operation Panel is displayed, the Copy Key on the electronic board control panel is used for scanning images into the computer. Panel Name Description This lamp indicator displays the contrast used during scanning or copying.
Computer Interfacing Panel Name Description The status box displays the status of the TWAIN driver and the electronic board. Stand by: Status Box The electronic board is stand by. Both of the Panaboard Operation Panel and the electronic board control panel are operational. Rotating: The electronic board is rotating the screen. Copying: The electronic board is copying the screen. Scanning: The electronic board is now scanning the images on the screen.
Daily Care and Maintenance Always turn off the power switch and unplug the power plug when cleaning outside and inside the unit. ■ Caring for the eraser English Daily Care and Maintenance When the erasing surface of the eraser becomes dirty, hold down the sheet under the top sheet with your finger and peel off the dirty sheet (white or gray sheet) by pulling in the direction of the arrow.
Daily Care and Maintenance ■ Cleaning the printer head and paper feed roller 3 Clean the Paper Feed Roller Wipe any dirt or stains off the paper feed roller. If black streaks appear on the copy, clean the printer head and the paper feed roller. 1 Push the door open button and open the printer door. Paper feed roller Door Open Button PUSH 2 OPEN Clean the Printer Head Dampen the tip of a cotton swab in ethyl alcohol and gently wipe the printer head.
English Troubleshooting Troubleshooting Treat problems according to the information given in the table below. If problems still persist, call your dealer for service. Symptom Power switch is on but the indicator is off. – The unit is out of copy paper. (The Error Indicator flashes “ Load new paper. 10 ”.) ”.) 10 Paper is jammed in the printer. Remove the jammed paper and cut off the wrinkled portion, then load paper again. 13 The paper feed roller is dirty.
Troubleshooting Symptom Care and Remedy See Page Panasonic Document Management System menu is remained in the Programs menu even if PanasonicDMS is uninstalled. The old Panasonic-DMS is not uninstalled if the old version of the Panasonic-DMS has been installed before installing the new one. Uninstall the old Panasonic-DMS from the Add / Remove Programs of the Control Panel.
English Specifications Specifications Model No. General Output Block Power supply Refer to the name plate on the printer Power consumption (Operational) Refer to the name plate on the printer External dimensions (Height × Width × Depth, without stand) 1504 mm × 1648 mm × 287 mm Mass (without stand) 41.
English Installation Manual (for qualified service personnel) Table of Contents page Assembling the Electronic Board . . . . . . . . . . . . . . . . . . . . . . . 28 ●Accessories for assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 ●Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Electronic Board Operations Check. . . . . . . . . . . . . . . . . . . . . 32 Repacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assembling the Electronic Board ■ Accessories for assembling The package includes the parts for setting up the electronic board shown below. Make sure that all of these parts are included in the package before proceeding. No.
■ Assembly 1 Assemble the optional stand or wall-mounting kit. 2 Remove the electronic board from the shipping box. English Assembling the Electronic Board ■ If you are using a stand, refer to page 34. ■ If you are using a wall-mounting kit, refer to page 38. Remove the joints, then remove the electronic board from the shipping box.
Assembling the Electronic Board 3 Install the electronic board. Install the electronic board using the stand (option) or wall-mounting kit (option). ■ Using the wall-mounting kit (option) 1) Hang the electronic board on the optional wallmounting fixtures. 2) Secure the wall-mounting fixture to the electronic board using the two wing-bolts [M5 x 12 mm (15/32”)] provided with the wallmounting kit (option). ■ Using the stand (option) 1) Hang the electronic board on the optional stand.
4 Attach the paper holders. 6 Install the paper holders to the holes in numerical order of the arrows (1), (2), (3) and (4). [First install the paper holder (A), then install the paper holder (B) on top of (A).] English Assembling the Electronic Board Wipe the screen film surface. Soak a soft cloth with water, wring well, and wipe the screen film surface. Paper holder (B) - hole (3), (4) Paper holder (A) - hole (1), (2) 5 Connect the power cord.
Electronic Board Operations Check After assembling the electronic board, perform the procedures presented in the following table to make sure it functions properly. Points to Check Step 1 2 3 Symptom Turn on the power switch. Open the printer door and load the copy paper, then close the printer door. • Loading the Copy Paper procedure (refer to the Operating Instructions on page 10) “ ” flashes after “ ” lights up. (Normal operation) (If not) Check power cord. (See step 5 on page 31.
English Repacking Perform Assembly Steps 2 through 5 on pages 29 - 31 in reverse to repack the electronic board and accessories. Use the joints to fasten the shipping box. Shipping box Paper holders Copy paper roll Power cord Markers Eraser Manuals, CD-ROM Electronic board Joints Joints Joints Installation Manual Joints Joints Joints Shipping box Caution • Do not touch the screen film surface, as this may damage it.
Assembling the Optional Stand (KX-B061) ■ Accessories The package box for the optional stand includes the parts noted below; please confirm that all parts are present before beginning installation . No. Part name Illustration Stand base Q’ty No.
■ Assembly 1 English Assembling the Optional Stand (KX-B061) Assembling the stand ■ Assembling the fall-prevention extension legs The fall-prevention extension legs increase the safety of the electronic board. Fall-prevention extension legs • Caster locks are attached to the back side. Caution • Install and always set the fall-prevention legs when using the stand. • When tightening the screw , hold the nut with pliers.
Assembling the Optional Stand (KX-B061) ■ Assembling the stand Assemble with the holes toward the front. 1 1 1 2 Locking casters side (rear) Pull the fall-prevention extension legs down (fall-prevention extension legs will be fixed by the lock pin.) Locking casters side (rear) Note *1 Do not tighten the screw 36 too much. This may deform the pipes.
2 Attach the fixtures 3 Assemble and install the electronic board. Refer to step 3 on page 30. English Assembling the Optional Stand (KX-B061) with the four wing-bolts.
Optional Wall-mounting Kit (KX-B063) Before attempting installation of this wall-mounting kit, we strongly recommend consulting with the building manager, engineer, or architect. The installer needs to know the type of construction used for the wall intended for this installation and the location of wall studs. Selection of hardware is critical for safe wall-mounting, and depends on the nature of wall construction. Installation should not occur until this consultation takes place.
■ Wall-mounting procedure 1 English Optional Wall-mounting Kit (KX-B063) Confirm that the wall is strong enough to support the weight of the electronic board. Caution The wall must be capable of supporting at least 2,010 N [205 kgf (452 lbs.)] for UB-7320. 2 Tape the Wall-mounting template on the wall. • Do not use the template included in the wall-mounting kit (KX-B063), but rather the one included with the electronic board (UB-7320). • When taping the template on the wall, make sure it is level.
Optional Wall-mounting Kit (KX-B063) ■ Attaching the wall-mounting fixtures The electronic board must be mounted with the method most suited to the material of the wall. Three methods are presented here. (Other options may be available in your area.) ● Attaching to metal or concrete walls Stud plugs (sold in stores) are needed. Drill bit Drill eight holes in the wall. For the correct hole size, refer to the instructions for the particular stud plugs used.
● Attaching English Optional Wall-mounting Kit (KX-B063) to plasterboard walls Split-wing toggles (sold in stores) are needed. Split-wing toggle Wall-mounting fixture Plasterboard Bolt Arms Arms Insert each bolt through a hole in the wall-mounting fixture and into the hole in the wall beneath so that the arms of the splitwing toggle are horizontal. For the correct hole size, refer to the instructions for the particular split-wing toggles used.