Model: CQ-C1335U/CQ-C1305U CQ-C1335L/CQ-C1305L Operating Instructions (CQ-C1335U) • Please read these instructions (including “Limited Warranty” and “Customer Services Directory”) carefully before using this product and keep this manual for future reference.
Safety Information Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual.
Caution Observe the following cautions when using this unit. Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. This unit is designed for use exclusively in automobiles. Do not operate the unit for a prolonged period with the engine turned off. Operating the audio system for a long period of time with the engine turned off will drain the battery. Do not expose the unit to direct sunlight or excessive heat.
Before Reading These Instructions Differences among 4 models Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. U.S.A. PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Accessories Instruction kit CQ-C1335U CQ-C1305U Operating Instructions (English: YEFM285905) (Français: YEFM285906) (Español: YEFM285907) Q’ty: 1 set Installation Instructions (YEFM294287) Q’ty: 1 Installation kit (YEP0FZ5698) Q’ty: 1 Mounting Collar Lock Cancel Plate (YEFX0217263A) Q’ty: 1 Trim Plate Mounting Bolt (5 mm ) (YEFC051020) Q’ty: 1 Power Connector Rubber Bushing (YGAJ021012) Q’ty: 1 Owners Information Card Q’ty: 1 Instruction kit CQ-C1335L CQ-C1335U CQ-C1335L Remote Control Uni
Battery Installation First Time Power On Preparation your car’s ignition switch to the ACC or 1 Set ON position. ACC ON 2 Press [SOURCE] (PWR: Power). CQ-C1335U CQ-C1335L Pull the insulation film out from the backside of the remote control gently. The 12-hour system is used for the clock. 1 Press [DISP].
Cleaning the Unit Maintenance/Fuse Your product is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exterior cleaning. Never use benzine, thinner, or other solvents. If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Servicenter. Fuse Warning • Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit directly without a fuse could cause fire or damage to the unit.
Notes on Discs If you use commercial CDs, they must have either of these labels shown at right. Some copy-protected music CDs are not playable.
Notes on MP3/WMA Note: MP3/WMA encoding and writing software is not supplied with this unit. Points to remember when making MP3/WMA files Common • High bit rate and high sampling frequency are recommended for high quality sounds. • Selecting VBR (Variable Bit Rate) is not recommended because playing time is not displayed properly and sound may be skipped. • The playback sound quality differs depending on the encoding circumstances.
Remote Control Unit CQ-C1335U CQ-C1335L Notes: • This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded) • Aim the remote control at the remote sensor and operate it. [0] to [9] selects a preset station (1 to 6), presets the current station (Hold it down for more than 2 seconds.), inputs the number in direct selection. [#] (NUMBER) executes the direct selection. [RANDOM] [SCAN] [REPEAT] toggles on/off each play mode.
General [SOURCE] (Source) selects a source. [PWR] (Power) toggles power on/off. [VOL] (Volume) [SQ] (Sound Quality) selects a sound type (SQ). Remote Control Sensor [MUTE] toggles mute on/off. Caution • Set the volume level to low enough before the AUX connection is completed. Failure to observe this, the loud noise may come out and damage your speakers and your hearing. Power On/Off Power on: Press [SOURCE] (PWR). Power off: Hold down [SOURCE] (PWR) for more than 1 second.
Radio (AM/FM) [SOURCE] (Source) selects a source. [DISP] (Display) switches the information on the display. [BAND] selects a band in the radio source. [APM] (Auto Preset Memory) executes APM in the radio source. (Hold it down for more than 2 seconds.) [TUNE ] [TUNE ] down/up the frequency. (Hold it down for more than 0.5 seconds and release it for seek tuning.) Preset buttons [1] to [6] selects a preset station in the radio source, and presets the current station.
Band Frequency Preset Number Display change Press [DISP] to change the display. Radio Source Display Radio mode display (Default) lights while receiving an FM stereo signal. Clock display Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively. Preset stations can be simply called up by pressing [1] to [6]. Auto Preset Memory (APM) Station Preset With this operation, stations with good receiving conditions can be automatically stored in the preset memory. 1 Select a band.
Audio Settings [VOL] selects a value in the audio menu. (PUSH SEL) (Push to select) selects items in the audio menu. [DISP] (Display) exits from the audio menu. [VOL] (PUSH SEL) to display the audio menu display. 1 Press Note: If no operation takes place for more than 5 seconds in the audio menu (2 seconds in Main volume adjustment), the display returns to the regular mode. Press [VOL] (PUSH SEL) to select a 2 mode to be adjusted. [VOL] clockwise or counterclockwise 3 Turn to adjust.
Player (Disc Player) Disc slot takes a disc in with the printed side facing up. Notes: • The power will be turned on automatically when a disc is loaded. • A disc which has both CD-DA data and MP3/WMA data on it may not be reproduced normally. [] (Eject) ejects the disc. Printed side up [SOURCE] (Source) selects a source. () (Play/Pause) toggles pause/play in the player source. [DISP] (Display) switches the information on the display. [] [] skip to the previous/next track/file in the player mode.
CD-DA mode display Track number Display change Play time Press [DISP] to change the display. Disc Player (CD-DA disc): Player Source Display Lights when the disc is loaded. Play Mode indicators MP3/WMA mode display Folder number File number Disc Player (MP3/WMA disc): Normal Normal Disc title Play time Track title Folder name/ Album* Clock File name/ Title, artist* Clock *ID3/WMA Tag On/Off Hold down [3] for more than 2 seconds. lights when folder random/ Play Mode repeat/scan is on.
Troubleshooting If You Suspect Something Wrong Check and take steps as described below. If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic Servicenter. The product should be serviced only by qualified personnel. Please refer the checking and the repair to professionals. Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking.
Specifications General Power supply Current consumption Maximum power output Tone adjustment range Speaker impedance Pre-amp output voltage Pre-amp output impedance Dimensions (W x H x D) Weight Front AUX input Input impedance Allowable external input Connector FM Stereo Radio : DC 12 V (11 V – 16 V DC), test voltage 14.4 V, negative ground : Less than 2.1 A (CD mode; 0.5 W x 4 channels) : 50 W x 4 channels (at 1 kHz), volume control maximum : Bass: ±12 dB at 100 Hz, Treble: ±12 dB at 10 kHz :4–8 : 2.
Memorandum
English WARNING/AVERTISSEMENT/ADVERTENCIA This installation information is designed for professional installers with knowledge of automobile electrical safety systems and is not intended for non-technical, do-it-yourself individuals. It does not contain instructions on the electrical installation and avoidance of potential harm to air bag, anti-theft and ABS braking or other systems necessary to install this product.
Installation/Montage/Instalación How to install the unit/Mode de montage de l’appareil/Instalación de la unidad Caution • Wear gloves for safety. • Make sure that wiring is completed before installation. 1 Remove the cable from the battery negative terminal. Retirez le câble de la borne négative de la batterie. Extraiga el cable del terminal negativo de la batería. 2 Mounting collar insertion. Bend mounting tabs. Insertion du cadre de montage . Repliez les languettes de fixation.
Wiring/Câblage/Conexiones eléctricas Caution To prevent damage to the unit, do not connect the power connector until the whole wiring is completed. Précaution Ne raccordez pas le connecteur d’alimentation sur l’appareil avant d’avoir effectué tous les raccordements pour éviter d’endommager l’appareil. Precaución Para evitar daños en la unidad, no conecte el conector de alimentación hasta haber completado todas las conexiones.
Final Installation/Installation finale/ Instalación final Final Check/Vérifications finales/ Comprobación final Lead Connections Connect all wires, making sure that each connection is insulated and secure. Bundle all loose wires and fasten them with tape so they will not fall down later. Now insert the unit into the mounting collar. Congratulations! After making a few final checks, you’re ready to enjoy your new auto stereo system. 1. Make sure that all wires are properly connected and insulated. 2.