Datasheet

ManualsBrandsPANASONIC ManualsSensors1 pc(s) Operating voltage (range): 5 - 24 Vdc (L x W x H) 20 x 15.5 x 16.5 mm

Panasonic Industrial Devices SUNX Co., Ltd.

Global Sales Department

2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan

■

Telephone: +81-568-33-7861

■

Facsimile: +81-568-33-8591

2016.03

panasonic.net/id/pidsx/global

No. CE-BEA-3 March, 2016

●

If you have any question about Optical Bubble Sensor,

please contact us by E-mail .

USA customers : usa-bmpj@ml.jp.panasonic.com

EURO customers : euro-bmpj@ml.jp.panasonic.com

Optical Bubble Sensor

For small diameter tubes

SERIES

Conforming to

EMC Directive

2016.03

panasonic.net/id/pidsx/global

Detects liquid and air bubbles

without fail!

Fits perfectly with applicable tube sizes!

Tube outer diameter

ø0.078

Tube outer diameter

ø0.125

Tube outer diameter

ø0.15 6

BE-A201□ BE-A301□ BE-A401□

Summary of content (4 pages)

PAGE 1
For small diameter tubes Optical Bubble Sensor BE-A SERIES Fits perfectly with applicable tube sizes! Conforming to EMC Directive Detects liquid and air bubbles without fail! Tube outer diameter ø2 mm ø0.078 in Tube outer diameter ø3 mm ø0.125 in Tube outer diameter ø4 mm ø0.156 in 2016.03 panasonic.
PAGE 2
Experience its ease of use! Optical bubble sensor is handy, simple, and precise! New proposals for ease of use One-touch attachment ø2 mm ø0.078 in tube type Simply attach the sensor with your hand! Hassle-free one-touch attachment without using tools! In the case of BE-A201□ / BE-A301□ In the case of BE-A401□ ø4 tube Push down Pull Pull Insert Tube ●Push down the tube into the sensor. New proposals for ease of use ●Stretch the tube and insert it into the sensor.
PAGE 3
Allows for close proximity attachment Staggered pattern Parallel pattern (10 mm 0.394 in pitch) (15.5 mm 0.610 in pitch) ø3 mm ø0.125 in ø4 mm ø0.156 in tube type Model No. : tube type BE-A301 (NPN output type) BE-A301P (PNP output type) Model No.
PAGE 4
BE-A SERIES Type NPN output PNP output Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F. 2) Sensing air gap refers to the width of an air bubble formed in the entire area of the inner diameter of the tube. Please note that this product cannot sense very small air bubbles or water drops. Refer to the figure 1 and 2. 3) Sensing is affected by dirt or residues adhered to the inner wall of the tube.