VP300P.book 1 ページ ２００３年２月１９日 水曜日 午後７時８分 Operating Instructions Model No. POWER VCR AG- P /I EJECT PULL -OPEN STOP PLAY PICTURE TIMER MODE CHECK / REW OPEN / CLOSE STOP FF / DVD PLAY PROGRESSIVE OUT MUSIC REC CHECK WITH PICTURE / DVD Player/Video Cassette Recorder Before attempting to connect, operate or adjust this product, please read these instructions completely.
VP300P.book 2 ページ ２００３年２月１９日 水曜日 午後７時８分 Contents Before Use DVD Dear Customer ............................................................................ 3 Accessories .................................................................................. 3 Playing discs ............................................................................. 32 Basic play.................................................................................... 32 Starting play from where you stopped it...................
VP300P.book 3 ページ ２００３年２月１９日 水曜日 午後７時８分 Dear Customer ≥Operations in these instructions are described mainly with the remote control, but you can do the operations on the main unit if the controls are the same. Accessories The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. Please check and identify the supplied accessories.
VP300P.book 4 ページ ２００３年２月１９日 水曜日 午後７時８分 FCC NOTE: CAUTION! This equipment has been tested and found to comply with Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
VP300P.book 5 ページ ２００３年２月１９日 水曜日 午後７時８分 Usage Precautions Please read these precautions before you operate this unit. If this unit is suddenly moved from a cold to a warm place, dew may form on the tape and inside this unit. Keep this unit away from flower vases, tubs, sinks, etc. If liquids are spilled into this unit, serious damage could occur. If you spill any liquid into this unit, consult qualified service personnel.
VP300P.book 6 ページ ２００３年２月１９日 水曜日 午後７時８分 Disc information ª Discs that can be played Disc type Logo ª DVD-RAM discs The DVD-RAM you can play on this unit are those recorded with DVD video recorders, DVD video cameras, personal computers, etc. using Version 1.1 of the Video Recording Format (a unified video recording standard).
VP300P.book 7 ページ ２００３年２月１９日 水曜日 午後７時８分 Control reference guide This section describes in detail the function of each button, switch and connection socket.
VP300P.book 8 ページ ２００３年２月１９日 水曜日 午後７時８分 Control reference guide (continued) The unit’s display (1) (2) (3) SP LP EP VP REMAIN [B] (6) (7) On: while recording or while a timer recording is being performed VCR indicator .....................................(lpage 17,20) (6) Channel display ..................................... (lpage 20) ≥1, 2, 3, ....., 125 / A1, A2 ≥Indicates the channel while in the TV reception mode or the channel set for timer recording.
VP300P.book 9 ページ ２００３年２月１９日 水曜日 午後７時８分 Control reference guide (continued) When you operate the video cassette recorder, always select “VCR” with the [VCR/TV/DVD] switch. If “VCR” is not selected, normal operation will not be possible. The remote control unit for this unit is a universal remote controller. As such, some of its buttons are not used to operate this unit.
VP300P.book 10 ページ ２００３年２月１９日 水曜日 午後７時８分 Control reference guide (continued) ª DVD OPERATION When you operate the DVD, always select “DVD” with the [VCR/TV/DVD] switch. If “DVD” is not selected, normal operation will not be possible. (1) DVD POWER button (DVDÍ).................(lpage 32) VCR/ DVD Press [DVDÍ] to switch this unit from on to standby mode or vice versa. In standby mode, the unit is still connected to the main AC power.
２００３年２月１９日 水曜日 午後７時８分 The remote control Control reference guide (continued) ª TV OPERATION Installing the Batteries Only Panasonic TVs can be operated with the provided remote control. The settings for operating the TV with the remote control have already been made. No additional settings need to be performed. However, some Panasonic TVs cannot be operated using this remote control.
VP300P.book 12 ページ ２００３年２月１９日 水曜日 午後７時８分 Connections This section shows you how to connect the unit to an antenna, TV, etc. When the unit is turned on after connecting the antenna cable and the AC power cord, Plug in Auto Tuning and Auto Clock Setting start automatically. Basic Connections The following connections are required to record the video cassette and play back the video cassette and discs through the TV. Preparation ≥Refer to the television’s operating instructions.
VP300P.book 13 ページ ２００３年２月１９日 水曜日 午後７時８分 Connections (continued) The following connections are for the DVD section only. Carry out the Basic Connections described on the left page to view video from the VCR section. ≥You may need to change the video-input mode on the TV to view video from the VCR and DVD sections. Read your television’s operating instructions for details.
VP300P.book 14 ページ ２００３年２月１９日 水曜日 午後７時８分 Cable Connection Cable-This Unit-TV (For CATV/PAY Channels Recording/Playback) The unit has an extended range, and can tune the Low-Band, Mid-Band, Super-Band, Hyper-Band, Ultra-Band, and Special cable channels (Channels A-5sA-1, AsW, AAsFFF, GGGsWWW, WWWr1sWWWr12, 100s125, 5A). Also, the unit can tune to any of the 56 UHF channels (14s69). Refer to Channel Set on page 29 .
VP300P.book 15 ページ ２００３年２月１９日 水曜日 午後７時８分 Tuning the TV to your unit Auto Tuning searches for TV stations from VHF minimum to UHF maximum and memorizes every tuned program position. VCR/ DVD VCR/DVD/TV TV TV VCR Notes: ≥If the unit is turned on with the antenna not connected, all channels are skipped. ≥When Auto Tuning is canceled halfway, Auto Tuning is not executed even if the unit is turned off and then turned on again. In this case, see page 16 “To Restart Plug in Auto Tuning”.
VP300P.book 16 ページ ２００３年２月１９日 水曜日 午後７時８分 Tuning the TV to your unit (continued) ª To Restart Plug in Auto Tuning Make sure there is no video cassette and disc loaded in the unit. 1) Keep both [CH] I and J on this unit pressed simultaneously for 3 seconds or more while the unit is powered on. ≥The channel displayed on the unit’s display disappears for a moment then changes to 2.
Text 1.fm 17 ページ ２００３年２月２０日 木曜日 午前１０時３５分 VCR Playback Basic Playback VCR/ DVD TV TV VCR VCR VCR/DVD OUTPUT Preparations ≥Confirm that the TV is on and the unit viewing channel is selected. ≥Switch [VCR/TV/DVD] to “VCR”. ≥Press [VCR Í] to turn on the unit. ≥Press [VCR/TV] to select the VCR mode.
VP300P.book 18 ページ ２００３年２月１９日 水曜日 午後７時８分 VCR Playback (continued) Other Playback Functions VCR/ DVD VCR/DVD/TV TV To Stop Playback Automatically (Playback Off Timer Function) TV VCR DVD VCR VCR/TV/DVD REC VCR/DVD REC CHECK If you set the playback duration, the playback will stop automatically. After the set playback time has elapsed, this unit automatically stops playback and switches off.
VP300P.book 19 ページ ２００３年２月１９日 水曜日 午後７時８分 VCR Playback (continued) Tracking Adjustment and Vertical Locking Adjustment To Playback in the Desired Picture Quality (Picture Mode) Preparations ≥Switch [VCR/TV/DVD] to “VCR”. This function reproduces optimum playback picture from various kind of recorded tapes and contents. ª For manual tracking adjustment Press [PICTURE] and select the corresponding Picture Mode as follows.
VP300P.book 20 ページ ２００３年２月１９日 水曜日 午後７時８分 Manual Recording Operations Display Symbols 1 Insert a video cassette tape with an intact erasure prevention tab. VCR/ DVD TV TV VCR VCR VCR/DVD OUTPUT Numeric buttons ≥If it has already been inserted, press [VCRÍ] to turn the unit on. VCR/DVD/TV DVD VCR/TV/DVD 2 Press [VCR/TV] to select the VCR REC VCR/DVD REC CHECK mode. REC OUTPUT 1 2 3 4 5 6 CH TV station. CH ≥If you press and hold down these buttons, the channels changes quickly.
VP300P.book 21 ページ ２００３年２月１９日 水曜日 午後７時８分 Manual Recording (continued) OPEN/CLOSE EJECT TAPE TIMER REC REFRESH PLAY CH REC/OTR JET REW STOP PLAY PROGRESSIVE OUT VIDEO AV2 IN MUSIC REC CHECK WITH PICTURE REC CHECK PICTURE TIMER MODE CHECK To start recording quickly and for a set duration. Preparation ≥Insert a video cassette with an intact erasure prevention tab. Operations 1 While recording, Operations Switch [VCR/TV/DVD] to “DVD”.
VP300P.book 22 ページ ２００３年２月１９日 水曜日 午後７時８分 Timer Recording Operations On Screen Display 1 Press [PROG/CHECK]. VCR/ DVD The timer-programming screen appears. VCR/DVD/TV TV TV VCR 2 Press [PROG/CHECK] DVD VCR VCR/TV/DVD repeatedly to select a blank line and press [ENTER].
VP300P.book 23 ページ ２００３年２月１９日 水曜日 午後７時８分 Timer Recording (continued) Checking a Timer Program In step 3, select the desired day by pressing [Cursor]34. For example, SU (Sunday) On Screen Display ≥This unit must be turned on, or the timer recording indicator “ ≥Confirm that the TV is on and this unit viewing channel is selected.
VP300P.book 24 ページ ２００３年２月１９日 水曜日 午後７時８分 Search Functions Saving Jet Navigator data Operations 1 Press [MENU] to display the VCR MENU. VCR/ DVD VCR/DVD/TV TV 2 Select “OPTION” by pressing [Cursor]34 and then TV VCR DVD VCR/TV/DVD press [ENTER]. REC VCR/DVD REC CHECK 3 Select “JET NAVIGATOR” OUTPUT by pressing [Cursor]34 and then press [Cursor]21 to change the setting to “ON”.
VP300P.book 25 ページ ２００３年２月１９日 水曜日 午後７時８分 Search Functions (continued) To Set the Category When Recording Over the Same Location on a Tape: ≥The originally recorded program is deleted from the list. ≥Program contents starting near the start and end of the newly The category setting allows you to find what kind of programs are recorded by the character and the icon indications.
VP300P.book 26 ページ ２００３年２月１９日 水曜日 午後７時８分 Search Functions (continued) VCR/ DVD To Find the Beginning of Each Recording (VHS Index Search System) VCR/DVD/TV TV TV VCR DVD VCR/TV/DVD This unit automatically records special index signals on the tape every time a recording is started. The Index search function makes use of these index signals to let you find the beginning of a desired program quickly and easily.
２００３年２月１９日 水曜日 午後７時８分 Other Functions Search Functions (continued) Searching while checking the video cassette contents (Intro-Jet Scan) TAPE REFRESH The approximate beginnings of each recorded program are played in succession at high speed so that the program to be viewed can be located easily. AV2 IN Preparations ≥Confirm that the TV is on and the unit viewing channel is selected. ≥Switch [VCR/TV/DVD] to “VCR”. ≥Press [VCR/TV] to select the VCR mode. ≥Load the pre-recorded video cassette.
VP300P.book 28 ページ ２００３年２月１９日 水曜日 午後７時８分 Settings Using the On Screen Display Setting the Clock of your unit VCR/ DVD The clock is set automatically after Plug in Auto Tuning (lpage 15). Do the following if you want to set it again or if the time is not set correctly. VCR/DVD/TV TV TV VCR DVD Operations While the VCR MENU is displayed VCR/TV/DVD REC VCR/DVD REC CHECK OUTPUT 1 Select “CLOCK SET” by pressing [Cursor]34 and TRACKING/V-LOCK 1 2 3 4 5 6 7 8 9 0 100 then press [ENTER].
VP300P.book 29 ページ ２００３年２月１９日 水曜日 午後７時８分 Settings Using the On Screen Display (continued) Channel Set ª Manual Tuning The unit tunes automatically after you plug it in and turn it on for the first time (Plug in Auto Tuning lpage 15), but you can start the process again if necessary. 2 Select “MANUAL” by pressing [Cursor]34 and then press [ENTER]. 3 Press [Cursor]34 to Preparations ≥Select any program position except “A1” or “A2”. select “CH” and [Cursor]2 1 to select the channel.
VP300P.book 30 ページ ２００３年２月１９日 水曜日 午後７時８分 Settings Using the On Screen Display (continued) Option VCR/ DVD Operations While the VCR MENU is displayed (Common procedure lpage 28) VCR/DVD/TV TV TV VCR DVD 1 Select “OPTION” by pressing [Cursor]34 and then VCR/TV/DVD press [ENTER]. REC VCR/DVD REC CHECK OUTPUT 2 Press [Cursor]34 to TRACKING/V-LOCK 1 2 3 4 5 6 select the item and press [Cursor]2 1 to change the setting.
VP300P.book 31 ページ ２００３年２月１９日 水曜日 午後７時８分 Settings Using the On Screen Display (continued) Onscreen display Changing audio To see these displays, set the OSD item in the “OPTION” menu to “ON”. When a stereo and/or SAP broadcast is received, “STEREO” and/ or “SAP” light to show the type of broadcast. Press [DISPLAY]. The time and operation details appear on the screen for about 5 seconds. 1 2 3 4 5 0:00.22 ;¥ SP 1 STANDARD Press [AUDIO].
Text 2(DVD).fm 32 ページ ２００３年２月２０日 木曜日 午前１０時４３分 Playing discs ª When a menu screen appears on the television VCR/ DVD VCR/DVD/TV TV TV VCR DVD VCR/DVD OUTPUT Numeric buttons [DVD-V[ [VCD] Press the numeric buttons to select the desired item. Example: “03”; [3] “10”; [S10]l[1]l[0] ≥Play of the selected item now begins. DVD VCR/DVD/TV REC VCR/DVD REC CHECK ≥Some discs may take time for the menu screen, video or audio to be presented.
Text 2(DVD).fm 33 ページ ２００３年２月２０日 木曜日 午前１０時４３分 Playing discs (continued) Starting play from where you stopped it To view with progressive output [DVD-V[ You can enjoy higher image quality than that output from the conventional video out terminal or S-video terminal (Interlace and progressive output lpage 58).
VP300P.book 34 ページ ２００３年２月１９日 水曜日 午後７時８分 Playing discs (continued) Skipping chapter(s)/track(s) Press [: ] (backward) or [ 9] (forward). VCR/ DVD ≥Each press increases the number of skips. VCR/DVD/TV TV TV VCR DVD VCR/TV/DVD Notes: ≥This works while stopping on some discs. ≥After skipping, the unit returns to the previous state, play or pause. ≥ Pressing [: ] or [ 9] may take you to a menu screen depending on the disc or the portion played (e.g. Video CDs). This may not work on some discs.
VP300P.book 35 ページ ２００３年２月１９日 水曜日 午後７時８分 Other methods of play [DVD-V[ [RAM[ [VCD] [CD] [MP3] [WMA] Preparations ≥To view the video on a DVD or Video CD, turn on the TV and select the video input for this unit. ≥Switch [VCR/TV/DVD] to “DVD”. To play repeatedly (Repeat play) [DVD-V[ [RAM[ [VCD] [CD] [MP3] [WMA] (When the elapsed play time is displayed) Press [REPEAT] during play. Each press: [DVD-V[ Chapter l Title l Off To view missed scenes (Quick Replay) During play e.g.
VP300P.book 36 ページ ２００３年２月１９日 水曜日 午後７時８分 Other methods of play (continued) To play in your favorite order (Program play) VCR/ DVD [DVD-V[ [VCD] [CD] [MP3] [WMA] You can select up to 32 items to play in the order you choose. ≥This does not apply to DVD-RAM. This may not work with some DVD discs. VCR/DVD/TV TV TV VCR DVD VCR/TV/DVD REC VCR/DVD REC CHECK OUTPUT 1 While stopped TRACKING/V-LOCK Numeric buttons 1 2 3 4 PROGRAM 6 5 2 Press [ENTER].
VP300P.book 37 ページ ２００３年２月１９日 水曜日 午後７時８分 Playing the programs or play lists on DVD-RAM To play back favorite scenes only (Play lists) VCR/ DVD VCR/DVD/TV TV [RAM[ Play lists created on Panasonic DVD recorders (optional) can be played back. TV VCR DVD VCR/TV/DVD REC VCR/DVD REC CHECK OUTPUT Play list: It is a list of moving pictures edited on Panasonic DVD recorders (optional) by collecting only favorite scenes in programs or by replacing some scenes.
VP300P.book 38 ページ ２００３年２月１９日 水曜日 午後７時８分 MP3/WMA and CD text navigating menus ª To select a track from a group in the tree screen (showing the entire disc) to play. VCR/ DVD [MP3] [WMA] While the menu screen is displayed VCR/DVD/TV TV 1 Press [Cursor]1 while a track is highlighted to TV VCR DVD VCR/TV/DVD display a tree screen.
VP300P.book 39 ページ ２００３年２月１９日 水曜日 午後７時８分 MP3/WMA and CD text navigating menus (continued) ª Viewing the text information on tracks To find a file by entering part of the title [CDtext] While the menu screen is displayed You can find a file by entering part of the title. Only uppercase characters can be entered, but corresponding lowercase characters are also searched. 1 To view the information for a track, select it with [Cursor]34.
VP300P.book 40 ページ ２００３年２月１９日 水曜日 午後７時８分 To get more enjoyment from movies and music Soundtracks [DVD-V[ [RAM[ [VCD] (Discs with multiple soundtracks) VCR/ DVD During play Press [AUDIO]. VCR/DVD/TV TV TV VCR DVD VCR/TV/DVD [DVD-V[ The number changes each time you press the button. REC VCR/DVD REC CHECK OUTPUT Digital 1 English 3/2.
VP300P.book 41 ページ ２００３年２月１９日 水曜日 午後７時８分 To get more enjoyment from movies and music (continued) To change the settings in accordance with the software CINEMA Preparations ≥To view the video on a DVD or Video CD, turn on the TV and select the video input for this unit. ≥Switch [VCR/TV/DVD] to “DVD”. Press [CINEMA]. [DVD-V[ [RAM[ [VCD] You can change the picture quality for movie viewing. Cinema1 Each press: [#Cinema 1: Mellows images and enhances detail in dark scenes.
VP300P.book 42 ページ ２００３年２月１９日 水曜日 午後７時８分 To get more enjoyment from movies and music (continued) Variable Zoom function VCR/ DVD [RAM] [DVD-V] [VCD] Change the zoom ratio so the pictures expands to the optimum size to fill the screen. VCR/DVD/TV TV Preparation Change the setting “TV Aspect” to suit your television. (lpage 49) TV VCR DVD REC VCR/DVD REC CHECK OUTPUT During play TRACKING/V-LOCK 1 2 3 4 5 6 1 Press [DISPLAY] several times and select the Unit CH information.
VP300P.book 43 ページ ２００３年２月１９日 水曜日 午後７時８分 Using On-Screen Menu Icons [DVD-V[ [RAM[ [VCD] [CD] [MP3] [WMA] On-Screen Menu Icons are menus that contain information about the disc or unit. These menus allow you to perform operations by changing this information. VCR/ DVD VCR/DVD/TV TV TV VCR Preparations ≥Turn on the TV and select the video input for this unit. ≥Switch [VCR/TV/DVD] to “DVD”.
VP300P.book 44 ページ ２００３年２月１９日 水曜日 午後７時８分 MP3Using On-Screen Menu Icons (continued) Disc information e.g. [DVD-V[ Vocal 1 a b c d e f e.g. [MP3] [WMA] PG: PL: a G: T: b 2 3 12 18 a b h i Program number [RAM] Play list number [RAM] Group number [MP3] [WMA] Title number [DVD-V] Track number [VCD] [CD] Time [DVD-V] [RAM] Select a position to start play by specifying a time.
VP300P.book 45 ページ ２００３年２月１９日 水曜日 午後７時８分 MP3Using On-Screen Menu Icons (continued) Unit information Play Menu Audio Menu e.g.
VP300P.book 46 ページ ２００３年２月１９日 水曜日 午後７時８分 MP3Using On-Screen Menu Icons (continued) Picture Menu [DVD-V[ [RAM[ [VCD] ª When progressive output is on: N 480P ª When progressive output is off: Auto1 U1 U1 U1 0 0 0 U2 U2 U2 0 0 0 U3 U3 U3 480P Auto1 N a 480 I b U1 0 0 0 a d e f U2 0 0 0 a g h i U3 480 I b a Unless otherwise indicated, select items with [Cursor]2 1 and change with [Cursor]34. .
VP300P.book 47 ページ ２００３年２月１９日 水曜日 午後７時８分 Enjoying more powerful sound To connect to external audio devices You can enjoy Dolby digital sound and DTS surround sound. ª Enjoying 5.1-channel surround sound with Dolby Digital¢ and DTS ¢ Only discs supporting Dolby Digital or 5.1-ch surround Amplifier with built-in decoder (Not supplied) or, Decoder (Not supplied) + amplifier (Not supplied) Speaker (Not supplied) OPTICAL IN Example: Six speakers are connected. Insert fully, with this side facing up.
VP300P.book 48 ページ ２００３年２月１９日 水曜日 午後７時８分 Changing settings VCR/ DVD Change the settings to suit your preferences and to suit the unit to the environment in which it is being used. These settings are retained in memory until they are changed, even if the unit is turned off. ≥See the right page for menu and option details.
VP300P.book 49 ページ ２００３年２月１９日 水曜日 午後７時８分 Changing settings (continued) SET UP menus ≥Underlined items are the initial setting. Disc DVD-V Video DVD-V RAM [VCD] Audio DVD-V RAM [VCD] Display Others Items Options French Spanish Original Other ¢¢¢¢ The original language of each disc will be selected. Other ¢¢¢¢: Input a code number with the numeric buttons (l page 48). Audio Choose the preferred audio language.
VP300P.book 50 ページ ２００３年２月１９日 水曜日 午後７時８分 Changing settings (continued) Quick Setup VCR/ DVD The QUICK SETUP screen assists you to make basic settings for DVD.
VP300P.book 51 ページ ２００３年２月１９日 水曜日 午後７時８分 Changing settings (continued) Entering a password (Ratings) Digital output [DVD-V] While SET UP menus are displayed, select the “Disc” tab and then “Ratings” by following “Common procedures” (lpage 48, 49) to set a ratings level to limit DVD-Video play. [DVD-V[ Change the settings when you have connected equipment through this unit’s OPTICAL DIGITAL AUDIO OUT terminal.
VP300P.book 52 ページ ２００３年２月１９日 水曜日 午後７時８分 Editing Assemble Editing VCR/ DVD This function can be used to make up an edited tape from other recordings or video sources. A new scene can be added to the end of previous one. VCR/DVD/TV TV TV VCR DVD VCR/TV/DVD Preparations ≥Connect a camera or another VCR to this unit as shown. ≥Confirm that the TV is on and the unit viewing channel is selected. ≥Switch [VCR/TV/DVD] to “VCR”. ≥Insert a recorded cassette tape with an intact erasure prevention tab.
VP300P.book 53 ページ ２００３年２月１９日 水曜日 午後７時８分 Editing (continued) ª When playing back 4 Start playing on the camera. AV2 IN VCR EJECT TIMER REC TAPE REFRESH CH VIDEO L REC/OTR JET REW AUDIO STOP ≥Initially, the "A2" channel is selected. However, if the camera is not played (the external input is not used), you may press [CH]IJ to switch to the video of a TV program. (Audio stays on DVD.) PLAY R PICTURE MODE TI CH 5 Press [ 1](PLAY) to start playing the DVD on this unit.
VP300P.book 54 ページ ２００３年２月１９日 水曜日 午後７時８分 Error Messages Before requesting service, check the following points once again. On Screen Display ª VCR PLEASE PUT IN A VIDEO CASSETTE. ≥[REC¥] (¥REC/OTR) or [TIMER ]( TIMER REC) has been pressed without a video cassette inserted. Insert a video cassette with an intact erasure prevention tab. 20, 22 PLEASE STOP THE TAPE. ≥CHANNEL SET has been selected during playback. Stop the tape. 29 PLEASE SET THE CLOCK. ≥[TIMER ]( Set the clock.
VP300P.book 55 ページ ２００３年２月１９日 水曜日 午後７時８分 Before Requesting Service Before requesting service, check the following points once again. General No power. ≥Insert the AC power supply cord and system cable securely. 12 No response when buttons pressed. ≥Some operations may be prohibited by the disc. ≥The unit may not be operating properly due to lightning, static electricity or some other external factor.
VP300P.book 56 ページ ２００３年２月１９日 水曜日 午後７時８分 Before Requesting Service (continued) Picture No picture. ≥Check the connection. ≥Make sure the television is on. ≥Ensure the television’s video input setting is correct. When the audio/video cable is connected, Ensure the input is switched on the TV. (e.g. Video 1) When the audio/video cable is not connected, Ensure the video exclusive channel (e.g. Channel 3 or Channel 4) is selected. Also adjust Channel 3 or Channel 4 on the TV.
VP300P.book 57 ページ ２００３年２月１９日 水曜日 午後７時８分 Before Requesting Service (continued) Disc play Play doesn’t start (or stops immediately) when you press [1] (PLAY). ≥Condensation has formed: Wait 1 to 2 hours for it to evaporate. ≥This unit cannot play discs other than the ones listed in these operating instructions. ≥This unit cannot play DVD-Video with a region number other than “1”, “ALL” or multiple region numbers including “1”. ≥The disc may be dirty and may require cleaning.
VP300P.book 58 ページ ２００３年２月１９日 水曜日 午後７時８分 Glossary Audio channel for DVD (ch) Finalize Sound is divided into channels based on the sound’s role. Example: 5.1 channel ≥Front speakers— 1 left channel and 1 right channel ≥ Center speaker— 1 channel ≥ Surround speakers— 1 left channel and 1 right channel To process a DVD-R, CD-R or CD-RW disc recorded on by DVD recorder, etc. so that it can be played back by a player.
VP300P.book 59 ページ ２００３年２月１９日 水曜日 午後７時８分 Glossary (continued) MP3 (MPEG AUDIO Layer3 ) Title and chapter (DVD-Video) One of audio data compression methods adopted by MPEG. The audio data can be compressed into approx. 1/10 with only slight degradation of sound quality. The content of a DVD-Video is divided into larger segments (titles) and smaller segments (chapters). They are identified by title numbers and chapter numbers.
VP300P.book 60 ページ ２００３年２月１９日 水曜日 午後７時８分 Q&A Connection Timer recording I have a TV equipped with both the S-video input and the component video inputs. Which one should be used? ≥To view only the video on the DVD section, it is recommended to connect to the component video inputs. (lpage 13) The component video inputs allow the signals on a DVD to be output as they were recorded and reproduce colors with higher fidelity than using the S-video input terminal.
VP300P.book 61 ページ ２００３年２月１９日 水曜日 午後７時８分 Specifications AG-VP300P Power Supply: Power Consumption: Power Consumption When in Standby Mode: AC 120 V, 60 Hz 24 W 2.4 W ª VCR SECTION ª DISC SECTION Video Recording System: Playable Discs [8 cm (3q) or 12 cm (5q)]: 2 rotary heads, helical scanning system Video Heads: 4 heads Tape Speed: SP; 33.3 mm/s EP; 11.
VP300P.
VP300P.book 63 ページ ２００３年２月１９日 水曜日 午後７時８分 Index ∫P A-B repeat ........................................................................ 35, 45 Advanced Surround ............................................................... 41 Angle ................................................................................ 40, 44 Antenna system ..................................................................... 29 Assemble editing .................................................................... 52 Audio ....
VP300P.book 64 ページ ２００３年２月１９日 水曜日 午後７時８分 PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 WESTERN ZONE: 3330 Cahuenga Blvd W.
