User Guide

- 96 -
Selects the brightness level of the right-leaning zebra patterns on the screen.
1 Touch [ZEBRA DETECT 2].
≥ Touch [SET].
2 Touch / to adjust settings.
3 Touch [ENTER].
≥ Touch [EXIT] to exit the menu screen.
≥ Zebra 2 can be displayed by pressing the ZEBRA button after setting. (l 62)
Displaying of the luminance level display marker can be switched.
≥ Marker can be displayed by pressing ZEBRA button when set to [ON]. (l 62)
You can check if the image is level while recording motion pictures and still pictures. The function
can also be used to estimate the balance of the composition.
≥ The guidelines do not appear on the images actually recorded.
≥ When Focus Assist is set to on, the following occurs. (l 39)
j The guidelines are not displayed. (these are displayed on the TV when this unit is connected to
TV.)
j The setting cannot be changed.
Display of the range that can be displayed with the common household TV (safety zone) can be
switched.
≥ The safety zone is not displayed on the images that is actually recorded.
Selects the operation of the Recording Counter during recording. (l 54)
[ZEBRA DETECT 2]
[SET]/[OFF]
[MARKER]
[ON]/[OFF]
[GUIDE LINES]
[OFF]/ / /
[SAFETY ZONE]
[90%]/[OFF]
[REC COUNTER]
[TOTAL]/[SCENE]
AG-AC90-VQT4M99_mst.book 96 ページ ２０１２年９月２５日 火曜日 午後１２時６分