User Guide

- 100 -
Other Functions
Menu items displayed are different depending on the position or setting of the mode switch.
The SD card can be formatted. (l 28)
≥ Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC, disc etc. (l 79)
The used space and remaining recordable time of the SD card can be checked.
≥ Touching [CHANGE MEDIA] switches the unit between the display for the SD card 1 and the
display for the SD card 2.
≥ When the mode switch is set to , remaining recordable time for the selected recording mode
is displayed.
≥ Touch [EXIT] to close the indication.
≥ The SD card requires some space to store information and manage system files, so the actual
usable space is slightly less than the indicated value. The usable space is generally calculated as
1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are expressed as
1GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of the capacity
appears to be smaller.
The wireless remote control (supplied) can be used. (l 25)
The recording lamp lights up during recording and flashes when the unit receives a signal from the
wireless remote control. When this is set to [OFF], it does not light during recording.
: [OTHER FUNCTION] # desired setting
[FORMAT CARD]
[CARD STATUS]
[REMOTE CONTROL]
[ON]/[OFF]
[REC LAMP]
[ON]/[OFF]
MENU
AG-AC90-VQT4M99_mst.book 100 ページ ２０１２年９月２５日 火曜日 午後１２時６分