AG-AC90-VQT4M99_mst.book 1 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Operating Instructions Vol.2 Memory Card Camera-Recorder Model No. Register now!! This product is eligible for the AVCCAM 3 Year Warranty Repair Program. For details, see operating instructions Vol. 1. AG-AC90P AG-AC90PJ AG-AC90PX http://panasonic.biz/sav/pass_e/ Vol.2 This document explains in detail how to operate this device. Concerning basic operation, please refer to the enclosed “Operating Instructions Vol.1” (printed document).
AG-AC90-VQT4M99_mst.book 2 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Read this first ∫ Caution regarding laser beams ∫ About the recording format for recording motion pictures You can record motion pictures with AVCHD recording formats using this unit. (l 30, 89) ≥ AVCHD Progressive (1080/60p) supported. AVCHD Progressive: It is possible to record video with highest quality (1080/60p) possible with this unit.
AG-AC90-VQT4M99_mst.book 3 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Contents Read this first ................................................. 2 Preparation Names and Functions of Main Parts ............ 5 Power supply................................................ 11 Charging the battery .............................. 12 Inserting/removing the battery ............... 13 Charging and recording time ................. 14 Connecting to the AC outlet................... 15 Preparation of SD cards ..........................
AG-AC90-VQT4M99_mst.book 4 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Menu Using the Menu ............................................ 84 Camera Setup ....................................... 84 Recording Setup.................................... 89 Switch and display setting ..................... 95 Other Functions ................................... 100 Video Setup ......................................... 104 Picture Setup ....................................... 104 Display Indications .................................
AG-AC90-VQT4M99_mst.book 5 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Preparation Names and Functions of Main Parts 12 34 5 6 14 7 15 8 9 10 11 12 13 16 17 18 1 Shoulder strap fixture (l 8) 2 Handle 3 Sub zoom lever (l 35, 99) ≥ This lever functions in the same manner as the zoom lever. 4 Sub recording start/stop button (l 27, 99) ≥ This button functions in the same manner as the recording start/stop button.
AG-AC90-VQT4M99_mst.
AG-AC90-VQT4M99_mst.book 7 ページ ２０１２年９月２５日 火曜日 午後１２時６分 45 46 47 48 49 50 51 52 53 54 55 56 57 61 62 63 58 59 60 45 LCD monitor extract part [PULL] (l 19) 46 LCD monitor (Touch screen) (l 20) 47 Shoulder strap fixture (l 8) 48 Eye cup attachment part (l 8) 49 Eye cup (l 8) 50 Viewfinder (l 21) 51 Battery release button [PUSH] (l 13) 52 Battery holder (l 13) 53 DC input terminal [DC IN] (l 15) ≥ Do not use any other AC adaptors except the supplied one.
AG-AC90-VQT4M99_mst.book 8 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ Adjust the length of the grip belt so that it fits your hand. 1, 2 Flip the belt cover and the belt. 3 Adjust the length. 4, 5 Replace the belt. ∫ Attaching the eye cup Attach by aligning the notch of the eye cup attachment part with the protrusion at the inside of the eye cup.
AG-AC90-VQT4M99_mst.book 9 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ Attaching the microphone holder A B C D E F Microphone holder attachment part Microphone holder adaptor External microphone (optional) Microphone holder screws (6 mm) (0.24 q) Microphone holder Microphone holder screws (12 mm) (0.47 q) ≥ Attach by using a commercially available screw driver.
AG-AC90-VQT4M99_mst.book 10 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ Attaching the lens cap Protect the lens surface with the lens cap while the unit is not used. Attach or remove it by pinching on it. ∫ Attaching the INPUT terminal cap Attach the INPUT terminal cap while the audio input terminals 1, 2 (XLR 3 pin) is not used.
AG-AC90-VQT4M99_mst.book 11 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Preparation Power supply ∫ About batteries that you can use with this unit (AG-AC90P/PJ) The battery that can be used with this unit is CGA-D54. (AG-AC90PX) The battery that can be used with this unit is CGA-D54s. It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets.
AG-AC90-VQT4M99_mst.book 12 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Charging the battery When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time. Important: ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit. ≥ It is recommended to charge the battery in a temperature between 10 oC and 30 oC (50 °F to 86 °F).
AG-AC90-VQT4M99_mst.book 13 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure. Removing the battery Make sure that the power switch is set to OFF and the status indicator is turned off, and then remove by holding onto it taking care not to drop. (l 18) While pressing the battery release button, remove the battery. Insert the battery until it clicks and locks.
AG-AC90-VQT4M99_mst.book 14 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC (77 oF)/humidity: 60%RH ≥ When using the viewfinder (times in parentheses are when using the LCD monitor) Battery model number [Voltage/Capacity (minimum)] Supplied battery/ CGA-D54 and CGA-D54s (optional) [7.
AG-AC90-VQT4M99_mst.book 15 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Important: ≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit.
AG-AC90-VQT4M99_mst.book 16 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Preparation Preparation of SD cards The unit can record motion pictures or still pictures to an SD card. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording.
AG-AC90-VQT4M99_mst.book 17 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Inserting/removing an SD card When using a non Panasonic SD card for the first time, or one which was previously used on another equipment, it is necessary to format the SD card. (l 28) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Caution: Check that the access lamp has gone off. Access lamp A ≥ When this unit is accessing the SD card, the access lamp lights up.
AG-AC90-VQT4M99_mst.book 18 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Preparation Turning the unit on/off Set the power switch to ON while pressing the lock release button B to turn on the unit. A To turn off the unit Set the power switch to OFF while pressing the lock release button. The status indicator goes off. The status indicator lights on. ≥ To turn on the unit again after the [ECONOMY (BATT)] or [ECONOMY (AC)] is activated, set the power switch to OFF once, and then to ON again.
AG-AC90-VQT4M99_mst.book 19 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Preparation Using the LCD monitor/Viewfinder The viewfinder is turned off and the LCD monitor is turned on when the LCD monitor is extracted. The viewfinder is turned on when the LCD monitor is retracted. Using the LCD monitor 1 Extract the LCD monitor in the direction as indicated in the figure. ≥ Hold the LCD monitor extract part A when pulling out. 2 Rotate to the position that is easy to view.
AG-AC90-VQT4M99_mst.book 20 ページ ２０１２年９月２５日 火曜日 午後１２時６分 How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. ∫ Touch Touch and release the touch screen to select icon or picture. ≥ Touch the center of the icon. ≥ Touching the touch screen will not operate while you are touching another part of the touch screen. ∫ Slide while touching Move your finger while pressing on the touch screen.
AG-AC90-VQT4M99_mst.book 21 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [LCD SET] It adjusts brightness and color density on the LCD monitor. 1 Select the menu. (l 24) MENU 2 3 4 : [SW & DISP SETUP] # [LCD SET] Touch the desired setting item. [COLOR]: Color level of the LCD monitor [BRIGHTNESS]: Brightness of the LCD monitor [CONTRAST]: Contrast of the LCD monitor Touch / to adjust settings. Touch [ENTER]. ≥ Touch [EXIT] to exit the menu screen.
AG-AC90-VQT4M99_mst.book 22 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [EVF COLOR] The recording images or playback images on the viewfinder can be selected between color/black and white. Select the menu. (l 24) MENU : [SW & DISP SETUP] # [EVF COLOR]# [ON] or [OFF] [ON]: Displayed in color [OFF]: Displayed in black and white Recording yourself ≥ Change the mode to . Rotate the LCD monitor towards the lens side. ≥ Displaying during the recording yourself can be switched by setting [SELF SHOOT].
AG-AC90-VQT4M99_mst.book 23 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Preparation Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. 1 Select the menu. (l 24) MENU 2 : [OTHER FUNCTION] # [CLOCK SET] Touch the date or time to be set, then set the desired value using / . Example: AG-AC90PJ ≥ The year can be set between 2000 and 2039. 3 Touch [ENTER].
AG-AC90-VQT4M99_mst.book 24 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Preparation Using the menu screen MENU 1 2 3 Press the MENU button MENU . Touch the top menu A. Touch the submenu B. ≥ Next (Previous) page can be displayed by touching . 4 5 Touch the desired item to enter the setting. Touch [EXIT] to exit the menu setting.
AG-AC90-VQT4M99_mst.book 25 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Preparation Using with the wireless remote control 10 Menu button [MENU]* 11 OK button [OK] (l 26) * means that these buttons function in the same manner as the corresponding buttons on the unit. Select the menu. MENU : [OTHER FUNCTION] # [REMOTE CONTROL] # [ON] 1 2 3 4 START/ STOP /VOL DATE/TIME EXT DISPLAY SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV SKIP STOP 5 6 7 Remove the insulation sheet A before using.
AG-AC90-VQT4M99_mst.book 26 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ Wireless remote control usable range 15 15 15 15 A Wireless remote control sensor Distance: Within approx. 5 m (16 feet) Angle: Approx. 15o up, down, left and right ≥ The wireless remote control is intended for indoor operation. Outdoors or under strong light, the unit may not operate properly even within the usable ranges. Operation of direction buttons/OK button 1 Press a direction button. ≥ Selected item will become yellow.
AG-AC90-VQT4M99_mst.book 27 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Before recording ∫ Basic camera positioning Normal recording Low-angle recording ≥ For easier low-angle recording, the sub recording start/stop button and the sub zoom lever can be used. ≥ Put your hand through the grip belt and hold the unit with both hands.
AG-AC90-VQT4M99_mst.book 28 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. ≥ Hold the eye cup of the viewfinder as close as possible to your right eye. ≥ Adjust the angle of the LCD monitor according to the position in which the unit is held. ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording.
AG-AC90-VQT4M99_mst.book 29 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Selecting a media to record [SD CARD 1] and [SD CARD 2] can be selected separately to record motion pictures or still pictures. 1 Select the menu. MENU 2 : [SW & DISP SETUP] # [MEDIA SELECT] Touch the media to record motion pictures or still pictures. ≥ The media is selected separately for motion pictures or still pictures and is then highlighted in yellow. 3 Touch [ENTER].
AG-AC90-VQT4M99_mst.book 30 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Recording motion pictures 1 Change the mode to . ≥ Extract the LCD monitor. 2 Press the recording start/stop button C to start recording. ≥ Recording will stop when you press the recording start/stop button again. A B When you begin recording, ; changes to ¥.
AG-AC90-VQT4M99_mst.book 31 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Recording still pictures 1 Change the mode to . ≥ Extract the LCD monitor. 2 Press the button. ≥ When photos are being recorded, the remaining recordable number of photos and the photo operation display are displayed.
AG-AC90-VQT4M99_mst.book 32 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ About picture size The number of recording pixels changes depending on the [REC FORMAT] (l 89) and the [ASPECT] (l 92). Recording format ASPECT [PS 1080/60p], [PH 1080/60i], [PH 1080/30p], [PH 1080/24p], [HA 1080/60i], [HE 1080/60i] - [SA 480/60i] Picture size 3 M 2304k1296 16:9 4:3 2.2M 1728k1296 ≥ It is possible to record still pictures while recording motion pictures.
AG-AC90-VQT4M99_mst.book 33 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Intelligent Auto Mode/Manual Mode MANU iA/MANU switch Slide the switch to change the Intelligent Auto Mode/Manual Mode. ≥ MNL is displayed in the Manual Mode. ≥ The following modes appropriate for the condition are set just by pointing the unit to what you want to record in the Intelligent Auto Mode. Mode Effect Portrait Faces are detected and focused automatically, and the brightness is adjusted so it is recorded clearly.
AG-AC90-VQT4M99_mst.book 34 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ Intelligent Auto Mode When switching to Intelligent Auto Mode, the Auto White Balance and Auto Focus operate and automatically adjust the color balance and focusing. Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. ≥ Color balance and focus may not be adjusted automatically depending on light sources or scenes. If so, manually adjust these settings.
AG-AC90-VQT4M99_mst.book 35 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Using the zoom It can be zoomed up to 12k. ≥ It can zoom up to 25k when the [i.Zoom] is set to [ON]. (l 92) ≥ Zoom magnification can be checked in the screen display of Z00 to Z99. The value gets larger when zoomed in, and the value gets smaller when zoomed out. 99 is displayed during the i.Zoom.
AG-AC90-VQT4M99_mst.book 36 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ About the zoom speed ≥ The zoom speed will vary depending on how far the zoom lever is pressed or how fast the zoom ring is rotated. ≥ Zoom speed of the sub zoom lever will vary depending on the setting of [SUB ZOOM]. (l 99) ≥ The zoom speed does not vary when operating with the wireless remote control. ≥ If you take your finger off the zoom lever during zoom operation, the operation sound may be recorded.
AG-AC90-VQT4M99_mst.book 37 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Image Stabilizer Function Use the image stabilizer to reduce the effects of shake during recording. This unit is equipped with Hybrid Optical Image Stabilizer. Hybrid Optical Image Stabilizer is a hybrid of optical and electrical image stabilizer. O.I.S. Optical image stabilizer button Press the button to turn optical image stabilizer on/off. / # (setting canceled) ≥ When [HYBRID O.I.S.] is [ON], is displayed. When [OFF], is displayed.
AG-AC90-VQT4M99_mst.book 38 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Focus Perform focus adjustments using the focus ring. If auto focusing is difficult due to the conditions, then use Manual Focus. ≥ Switch to Manual Mode. (l 33) FOCUS ASSIST FOCUS A/M 1 A B C FOCUS ASSIST button FOCUS A/M/¶ button Focus ring Press the FOCUS A/M/¶ button to switch to Manual Focus. ≥ It will switch to MF from AF. 2 Adjust the focus by rotating the focus ring.
AG-AC90-VQT4M99_mst.book 39 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ Focus Assist When the FOCUS ASSIST button is pressed, Focus Assist can be set. The in-focus area is displayed in red. ≥ When it is pressed once more, the settings are canceled. ≥ The red display does not appear on the images actually recorded. ≥ The red display does not appear on TV. Utilizing the USER button When performing Manual Focus, Push AF can be used by setting the USER button.
AG-AC90-VQT4M99_mst.book 40 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording White Balance Automatic White Balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the White Balance manually. Switch the modes of White Balance by pressing the W.B. button. A W.B. button W.B. Mode ATW ATW Lock Settings It will automatically adjust in accordance with the recording condition. It will lock the setting for ATW. P3.
AG-AC90-VQT4M99_mst.book 41 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ To set the White Balance in accordance to the recording scene 1 2 Fill the screen with a white subject or place a white piece of paper in front of the lens. Press the W.B. button to display Ach. ≥ When the operation icon is displayed and Ach is touched, it will switch to Bch . (l 64) 3 Keep on pressing the W.B. button to start the White Balance adjustment. ≥ The screen goes dark momentarily, “WB SET OK” is displayed, and the adjustment ends.
AG-AC90-VQT4M99_mst.book 42 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Iris adjustment Perform Iris/Gain adjustments using the iris ring. Adjust it when the screen is too bright or too dark. MNL F4.0 IRIS A/M A Gain value B Iris value C Auto iris icon* * It is displayed in Auto Iris Mode. 1 2 IRIS A/M button Iris ring ≥ Switch to Manual Mode. (l 33) 1 Press the IRIS A/M button to switch to Manual Iris Mode. ≥ disappears. ≥ The gain is displayed in dB.
AG-AC90-VQT4M99_mst.book 43 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ Adjusting brightness during the Auto Iris Mode ≥ Switch to Manual Mode. (l 33) 1 Select the menu. MENU 2 3 : [CAMERA SETUP] # [AUTO IRIS LEVEL] Touch / to adjust settings. Touch [EXIT] to complete the setting. Utilizing the USER button It is convenient to use following functions of the USER button when it is set to Manual Iris. ≥ Please refer to page 55 for details about setting the USER button.
AG-AC90-VQT4M99_mst.book 44 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Manual shutter speed Adjust the shutter speed when recording fast-moving subjects. ≥ Switch to Manual Mode. (l 33) 1 2 Touch the LCD monitor to display the operation icons and touch Touch / SHTR . (l 64) to adjust settings. ≥ When [AUTO] is touched, the shutter speed is set automatically. ≥ Touch SHTR to complete the adjustment. Shutter speed: 1/60 to 1/2000 ≥ It will be 1/30 to 1/2000 when [AUTO SLOW SHTR] is set to [ON].
AG-AC90-VQT4M99_mst.book 45 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Audio Input This unit can record audio in 5.1 ch or 2 ch. (The voice recording method is Dolby® Digital ( )) When recording in 2 ch, it is possible to switch between built-in microphone, external microphone, or connected audio equipment for each channel. Microphone setup Recording setting of the built-in microphone can be adjusted. Select the menu.
AG-AC90-VQT4M99_mst.book 46 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Switching Audio Input INPUT1 LINE MIC +48V OFF CH1 ON INT(L) INPUT1 INPUT2 INPUT2 LINE MIC CH2 +48V OFF A B C D ON INT(R) INPUT2 CH1 switch CH2 switch INPUT1, 2 (+48V) switches INPUT1, 2 (LINE/MIC) switches ∫ Using the built-in microphone Audio is recorded with the built-in microphone (5.1 ch) when the [MIC SETUP] is set to anything other than [2ch].
AG-AC90-VQT4M99_mst.book 47 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ Using an external microphone or audio equipment ≥ Set [MIC SETUP] to [2ch]. (l 45) 1 2 Connect an external microphone or audio equipment to AUDIO INPUT1, 2 terminals (XLR 3 pin). (l 9) Use INPUT1, 2 (LINE/MIC) switches to switch the connected audio input signal. LINE: audio equipment is connected Input level is 0 dBu. MIC: an external microphone is connected Input level is -50 dBu. ≥ When [EXT. MIC GAIN1] or [EXT.
AG-AC90-VQT4M99_mst.book 48 ページ ２０１２年９月２５日 火曜日 午後１２時６分 To remove the external microphone, etc., from the audio input terminals 1, 2 (XLR 3 pin) Remove while pushing on the PUSH section of the audio input terminals 1, 2 (XLR 3 pin). ≥ Set the input signal to built-in microphone by switching the CH1, CH2 switches to INT (L) or INT (R) after removing the external microphone. Audio will not be recorded when motion picture is recorded without switching.
AG-AC90-VQT4M99_mst.book 49 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Adjusting the audio input level ∫ Adjusting the input level of the built-in microphone (5.1 ch) ≥ Set the [MIC SETUP] to anything other than [2ch]. (l 45) 1 Select the menu. MENU : [RECORD SETUP] # [5.1ch MIC LEVEL] # desired setting [AUTO]: ALC is activated, and the recording level is adjusted automatically. [SET]/[SETr 2 ]: (When [SET]/[SETr Touch level. / The desired recording level can be set.
AG-AC90-VQT4M99_mst.book 50 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Adjusting the input level of the built-in microphone (5.1 ch) using the operation icons ≥ Set the [MIC SETUP] to anything other than [2ch]. (l 45) ≥ Set [5.1ch MIC LEVEL] to [SET]/[SETr ]. (l 49) 1 2 3 Display the operation icons and touch Touch / to adjust settings. Touch to complete the setting. . (l 64) ∫ Adjusting the input level of the built-in microphone (2 ch), external microphone or audio device ≥ Set [MIC SETUP] to [2ch].
AG-AC90-VQT4M99_mst.book 51 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Counter display You can change a counter display that indicates how much time has elapsed during recording or playback. COUNTER COUNTER button Each time you press the button, the counter display changes. Time Code # User Information # Recording Counter # Setting canceled Counter display Time Code Indications TC 00:00:00:00 or TC 00:00:00.00 ≥ Display will change depending on the setting of the [TC MODE].
AG-AC90-VQT4M99_mst.book 52 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Setting the Time Code Time code will display the recording time in hours, minutes, seconds, and frames. TC 00:00:00:00 (hour : minute : second : frame [NDF]) TC 00:00:00.00 (hour : minute : second . frame [DF]) ≥ The frame (Number of frames counted every second) will vary depending on the [REC FORMAT] setting.
AG-AC90-VQT4M99_mst.book 53 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [TC PRESET] You can set the initial time code. 1 Select the menu. MENU 2 : [RECORD SETUP] # [TC PRESET] Touch the item to set and change with / . ≥ It will be set to 00h00m00s00f when the RESET button is pressed. ≥ “h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame. 3 Touch [ENTER]. ≥ Touch [EXIT] to complete the setting.
AG-AC90-VQT4M99_mst.book 54 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Setting the Recording Counter Recording Counter will display the recording time in seconds. 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL])) SCN 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [SCENE])) [REC COUNTER] Select the counting method during the recording. MENU : [SW & DISP SETUP] # [REC COUNTER] # desired setting [TOTAL]: The count continues to increase until the Recording Counter is resetted.
AG-AC90-VQT4M99_mst.book 55 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording USER button Each of the USER button can register one function from the 12 available functions. ≥ There are three USER buttons (USER1 to USER3) on the main body and four USER button icons (USER4 to USER7) displayed on the LCD monitor. Setting the USER button 1 Select the menu. MENU 2 : [SW & DISP SETUP] # [USER BUTTON SETUP] Touch the USER button you wish to set.
AG-AC90-VQT4M99_mst.book 56 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Using the USER button To use the set USER button, press USER1 to USER3 button or touch the USER4 to USER7 button icon displayed when you touch the LCD monitor. (When you use the USER1 to USER3) (When you use the USER4 to USER7) SCN1 SCN2 SCN3 SCN4 SCN5 SCN6 USER4 USER1 USER2 ATW USER5 ATW.L USER6 HIST USER7 MENU USER3 ≥ To cancel, press the USER button or touch the USER button icon again.
AG-AC90-VQT4M99_mst.book 57 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Functions of the USER button ∫ List of USER button function Icon Item Function [P.AF] [PUSH AF] Push AF [B.Light] [BACKLIGHT] Backlight Compensation [S.Light] [SPOTLIGHT] Spotlight [B.FD] [BLACK FADE] Black Fade [W.FD] [WHITE FADE] White Fade [ATW] [ATW] ATW [ATW.L] [ATW LOCK] ATW Lock [D.ZM] [D.ZOOM] Digital Zoom [HIST] [HISTOGRAM] Histogram [REC.
AG-AC90-VQT4M99_mst.book 58 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Spotlight Switches to automatic iris control for spotlight. Very bright object is recorded clearly. ≥ appears when it is set. ≥ It will return to standard Auto Iris Mode ( ) when it is canceled. (l 42) Black Fade Fade in/fade out effect (black) can be added to the video and audio that is being recorded. Press USER button or touch USER button icon in the recording screen. ≥ Fade out will start, and fade in will start after completing the fade out.
AG-AC90-VQT4M99_mst.book 59 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ATW Lock The White Balance can be changed to ATW Lock. (l 40) ≥ It will return to ATW when canceled. ≥ This cannot be set when the White Balance is set to anything other than ATW. Digital Zoom Press USER button or touch USER button icon in the recording screen. ≥ The zoom magnification will change every time the button is pressed or the button icon is touched.
AG-AC90-VQT4M99_mst.book 60 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Last Scene Delete The motion picture recorded last can be deleted. Deleted scenes cannot be restored. 1 2 Press USER button or touch USER button icon in the recording screen. Touch [YES]. ≥ It will return to recording screen without deleting by touching [NO].
AG-AC90-VQT4M99_mst.book 61 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Useful functions DISP/MODE CHK A B C D DISP/MODE CHK button ZEBRA button QUICK START button BARS button ZEBRA BARS QUICK START Quick Start 1 Press and hold down the QUICK START button until the display on the LCD monitor/ viewfinder disappears. The quick start lamp E flashes green and the unit goes into Quick Start Standby Mode. 2 Press the QUICK START button.
AG-AC90-VQT4M99_mst.book 62 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Zebra ZEBRA button It will switch between the zebra display and the marker display every time the button is pressed. Zebra 1 # Zebra 2* # Marker* # setting canceled * It is not displayed when the [ZEBRA DETECT 2]/[MARKER] is set to [OFF]. (l 96) Zebra display: Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern).
AG-AC90-VQT4M99_mst.book 63 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Switching the screen indications/mode information display DISP/MODE CHK button All the screen display other than the Counter display, Recording start/stop, Zebra display, Marker, and Safety Zone will disappear when this button is pressed. (l 105) ≥ To cancel, press the DISP/MODE CHK button again.
AG-AC90-VQT4M99_mst.book 64 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Using of Operation Icons You can use convenient functions just by the easy operation of touching the screen. 1 Touch the LCD monitor in the recording screen. SCN1 SCN2 SCN3 SCN4 SCN5 SCN6 ATW ≥ The operation icons are displayed. 2 ATW.L Touch an operation icon. HIST ≥ The following function is available. Refer to the respective pages for the operation. SCN1 , SCN2 etc. Customize Scene (l 84)*1 ATW , ATW.L etc.
AG-AC90-VQT4M99_mst.book 65 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Playback Motion picture/Still picture playback 1 2 3 Change the mode to . Touch the play mode select icon A. PH PH PH PS PS HA HE SA SA PH PH PH PS PS HA HE SA SA Select the [MEDIA] and [VIDEO/PICTURE] you wish to play back. ≥ Touch [ENTER]. 4 Touch the scene or the still picture to be played back. ≥ The recording format is displayed in the thumbnail display of the motion pictures. ( PH , PS , etc.
AG-AC90-VQT4M99_mst.book 66 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Motion picture playback 1/;: 6: 5: ∫: : Still picture playback Playback/Pause Fast rewind playback* Fast forward playback* Stops the playback and shows the thumbnails. Display the direct playback bar (l 69) 1/;: 2;: ;1: ∫: Slide show (playback of the still pictures in numerical order) start/ pause. Plays back the previous picture. Plays back the next picture. Stops the playback and shows the thumbnails.
AG-AC90-VQT4M99_mst.book 67 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ Speaker/Headphone volume adjustment Operate the volume lever or the sub zoom lever to adjust the speaker/ headphone volume during Motion Picture Playback Mode. T T Towards “r”: Increases the volume Towards “s”: Decreases the volume W W ≥ Sound will be heard only during normal playback. ≥ If pause play is continued for 5 minutes, the screen returns to the thumbnails.
AG-AC90-VQT4M99_mst.book 68 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Motion picture playback using operation icon For details on the basic playback operations, refer to page 65. Playback operation Playback display Skip playback (to the start of a scene) During Playback Slow-motion Playback During Pause Frame-by-frame playback Operating steps Press the : or 9 button during playback. (Operation is possible with the wireless remote control only.
AG-AC90-VQT4M99_mst.book 69 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Playback operation Playback display Operating steps 1) During Playback Direct playback Touch to display the direct playback bar A. 2) Touch the direct playback bar or slide it while touching. ≥ The playback pauses temporarily and skips to the position touched or slid to while touching. ≥ Playback will start by releasing your touching or sliding finger. ≥ Touch to display the operation icon.
AG-AC90-VQT4M99_mst.book 70 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Playback Useful functions Creating still picture from motion picture A single frame from the recorded motion picture can be saved as a still picture. The number of recording pixels of photos created changes depending on the recording format of video taken and the image aspect ratio. Recording format Aspect ratio Picture size PS/PH/HA/HE 16:9 2.1 M 1920k1080 16:9 0.2M 640k360 4:3 0.3M 640k480 SA Press the playback.
AG-AC90-VQT4M99_mst.book 71 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. MENU : [VIDEO SETUP] # [RESUME PLAY] # [ON] If playback of a motion picture is stopped, scene. appears on the thumbnail view of the stopped ≥ The memorized resume position is canceled if you turn off the unit or change the mode. (The setting of [RESUME PLAY] does not change.
AG-AC90-VQT4M99_mst.book 72 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Playing back still pictures by date The still pictures recorded on the same day can be played back in succession. ≥ Change the mode to and touch the play mode select icon. Then, set [VIDEO/PICTURE] to [PICTURE]. (l 65) 1 Touch the date select icon. 3D 3D 3D A 2 Date select icon Touch the playback date. The still pictures recorded on the date selected are displayed as thumbnails. 3 Touch the still picture to be played back.
AG-AC90-VQT4M99_mst.book 73 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Playback Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ≥ Change the mode to and touch the play mode select icon. Then, switch to the thumbnail display of the scenes or still pictures to delete. (l 65) 1 Select the menu. MENU : [VIDEO SETUP] or [PICT.
AG-AC90-VQT4M99_mst.book 74 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ≥ Scenes/still pictures that cannot be played back (the thumbnails are displayed as ) cannot be deleted. ≥ In case of [ALL SCENES], the deletion may take time if there are many scenes or still pictures. ≥ If you delete scenes recorded on other products or still pictures conforming to DCF standard with this unit, all the data related to the scenes/still pictures may be deleted.
AG-AC90-VQT4M99_mst.book 75 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Playback Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. A 1 2 3 High quality HDMI terminal Component terminal Video terminal ≥ Use the AV multi cable (supplied) or HDMI cable (optional) and check the output settings. (l 78) ≥ HDMI is the interface for digital devices.
AG-AC90-VQT4M99_mst.book 76 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ≥ Check that the plugs are inserted as far as they go. ≥ Please use “High Speed HDMI Cables” that have the HDMI logo (as shown on the cover). Cables not conforming to the HDMI standard will not work. Panasonic HDMI cable is recommended. Part No.: RP-CHES15 (1.5 m) (4.9 feet) ≥ Do not use any other AV multi cables except the supplied one. ≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable is not required.
AG-AC90-VQT4M99_mst.book 77 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ To watch images on a regular TV (4:3) or when both sides of the images do not appear on the screen ∫ To display the on-screen information on the TV Change the menu setting to display the images correctly. (Check the TV setting.) MENU When the menu setting is changed, the information displayed on the screen (operation icon and Counter display etc.) can be displayed/not displayed on the TV.
AG-AC90-VQT4M99_mst.book 78 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Connecting with a HDMI cable Select the desired method of HDMI output. MENU : [OTHER FUNCTION] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p] ≥ [AUTO] determines the output resolution automatically based on information from the connected TV. If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p], [1080i] or [480p] which enables the images to be displayed on your TV.
AG-AC90-VQT4M99_mst.book 79 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Editing Connecting to a PC (File transfer/nonlinear editing) When this device and a computer for editing are connected using a USB connection cable, image data in the SD card can be transferred. ≥ Concerning non-linear editing, refer to the instruction manual of your editing software.
AG-AC90-VQT4M99_mst.book 80 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ∫ If using Mac PC OS CPU RAM Interface Other requirements Mac Mac OS X 10.8.1 Intel Core 2 Duo or better 2 GB or more USB port Mouse or equivalent pointing device ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ The USB equipment operates with the driver installed as standard in the OS.
AG-AC90-VQT4M99_mst.book 81 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Connecting to a PC A USB cable (supplied) ≥ Insert the plugs as far as they will go. ≥ Insert the SD card. 1 Connect this unit to the AC adaptor. ≥ Use the AC adaptor to free you from worrying about the battery running down. 2 3 Turn on the unit. Connect this unit to a PC. ≥ The USB function selection screen will appear on the screen of the unit. 4 Touch [PC] on the screen of this unit.
AG-AC90-VQT4M99_mst.book 82 ページ ２０１２年９月２５日 火曜日 午後１２時６分 About the screen indication of the unit ≥ Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or card access icon ( ) appears on the unit screen. ≥ If the screen does not change when the unit is operated while connected to a PC, disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit back on.
AG-AC90-VQT4M99_mst.book 83 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Editing Dubbing Dubbing with a Blu-ray disc recorder ≥ In this manual, “Blu-ray disc recorder” is referred to as “BD recorder”. Insert a memory card containing video shot in AVCHD mode using the camera into a BD recorder manufactured by Panasonic to save the contents in a Blu-ray Disc, DVD, or HDD. ≥ Use a BD recorder that supports AVCHD. However, dubbing may not be performed even when AVCHD is supported.
AG-AC90-VQT4M99_mst.book 84 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Menu Using the Menu Refer to page 24 for how to set up the Menu. Camera Setup ≥ Switch to manual mode. (l 33) MENU : [CAMERA SETUP] # desired setting [CUSTOMIZE SCENE] [SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]/[SCENE6] Preferred camera setting information can be saved to each scene file. Switch the scene file in accordance with the recording conditions. 1 2 Touch [CUSTOMIZE SCENE]. Touch the scene file.
AG-AC90-VQT4M99_mst.book 85 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ≥ This function’s default setting is [SCENE1]. ≥ It is possible to switch the scene file by touching SCN1 to SCN6 while displaying the operation icons. (l 64) ≥ It will return to the default settings when [SCENE] is selected in [INITIAL SET]. (l 103) [DETAIL LEVEL] Adjusts the level of the image outline correction. 1 2 3 Touch [DETAIL LEVEL]. Touch / to adjust settings. Touch [EXIT] to exit the menu screen.
AG-AC90-VQT4M99_mst.book 86 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [MASTER PED] Adjustment of black level based on the image is performed. 1 2 3 Touch [MASTER PED]. Touch / to adjust the black level. Touch [EXIT] to exit the menu screen. [AUTO IRIS LEVEL] Adjusting brightness during the Auto Iris Mode. (l 42) [DRS] Selects the DRS (Dynamic Range Stretcher) function.
AG-AC90-VQT4M99_mst.book 87 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [GAMMA] Tone or contrast of the image is set in accordance with the recorded scenes. 1 2 Touch [GAMMA]. Touch the desired setting item. [HD NORM]: This gamma setting is suitable for high defenition picture quality recording. [LOW]: This is a gamma setting with gradual slope at the low illuminated area. It will produce tranquil image with sharper contrast. [SD NORM]: This is the standard picture quality images setting.
AG-AC90-VQT4M99_mst.book 88 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [MATRIX] Represents the color during the recording. 1 2 Touch [MATRIX]. Touch the desired setting item. [NORM1]: Suitable for recording in the open air or under a halogen lamp. [NORM2]: Suitable for brighter colors than the [NORM1] mode. [FLUO]: Suitable for recording indoors under fluorescent lamp. [CINE-LIKE]: Suitable for cinema-like image. 3 Touch [EXIT] to exit the menu screen.
AG-AC90-VQT4M99_mst.book 89 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Recording Setup MENU : [RECORD SETUP] # desired setting [REC FORMAT] Switch the picture quality of the motion pictures to record. The frame rate and the recording method will vary depending on the recording format.
AG-AC90-VQT4M99_mst.book 90 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [2 SLOTS FUNC.] You can set the auto switch recording and backup recording. ≥ Insert SD cards to card slot 1 and card slot 2. [OFF]: Cancel the setting. [AUTO SW]: Set the auto switch recording [BACKUP]: Set the backup recording ∫ Auto switch recording This is simple relay recording. It is possible to continuously record on the SD card in the other card slot even when the available capacity of the SD card runs out during the recording.
AG-AC90-VQT4M99_mst.book 91 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [TIME LAPSE REC] A scene that moves slowly for long period of time is recorded frame by frame with an interval, and is recorded as a short time motion picture. One frame is recorded every recording interval that is set. The scene of one second is made up by 30 frames. ≥ Switch to manual mode. (l 33) [OFF]: Cancel the setting. [1 SECOND]/[10 SECONDS]/[30 SECONDS]/[1 MINUTE]/[2 MINUTES]: Change the recording interval. ≥ appears on the screen.
AG-AC90-VQT4M99_mst.book 92 ページ ２０１２年９月２５日 火曜日 午後１２時６分 ≥ Images displayed on the thumbnail in Playback Mode will differ from the motion pictures displayed at the start of playback. [TC MODE] [DF]/[NDF] Select the compensation mode for the time code. (l 52) [TCG] [FREE RUN]/[REC RUN] Sets the way the time code will move. (l 52) [TC PRESET] Initial value of the time code can be set. (l 53) [UB PRESET] User Information can be set.
AG-AC90-VQT4M99_mst.book 93 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [HYBRID O.I.S.] [ON]/[OFF] You can set the Hybrid Optical Image Stabilizer. (l 37) [AUTO SLOW SHTR] [ON]/[OFF] You can record bright pictures even in dark places by slowing the shutter speed. ≥ The shutter speed is 1/30 or more depending on the ambient brightness.
AG-AC90-VQT4M99_mst.book 94 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [BASS SETTING] Change the lower setting of the built-in microphone (5.1 ch) according to your choice. ≥ Set the [MIC SETUP] to [SURROUND] or [ZOOM MIC]. (l 45) [0dB]/[+3dB]/[+6dB]/[LOWCUT] ≥ Normally set to [0dB]. ≥ Select [+3dB] or [+6dB] to get strong power feeling at bass level. [2ch MIC ALC] [ON]/[OFF] ≥ Set [MIC SETUP] to [2ch].
AG-AC90-VQT4M99_mst.book 95 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Switch and display setting Menu items displayed are different depending on the position or setting of the mode switch. MENU : [SW & DISP SETUP] # desired setting [MEDIA SELECT] [SD CARD 1] and [SD CARD 2] can be selected separately to record motion pictures or still pictures. (l 29) [IRIS RING] Sets the rotation direction and iris control of the iris ring. ≥ Switch to manual mode. (l 33) A B [DOWN OPEN]: Iris will open when it is turned toward B.
AG-AC90-VQT4M99_mst.book 96 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [ZEBRA DETECT 2] [SET]/[OFF] Selects the brightness level of the right-leaning zebra patterns on the screen. 1 Touch [ZEBRA DETECT 2]. ≥ Touch [SET]. 2 3 Touch / to adjust settings. Touch [ENTER]. ≥ Touch [EXIT] to exit the menu screen. ≥ Zebra 2 can be displayed by pressing the ZEBRA button after setting. (l 62) [MARKER] [ON]/[OFF] Displaying of the luminance level display marker can be switched.
AG-AC90-VQT4M99_mst.book 97 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [VIDEO OUT OSD] [ON]/[OFF] The information displayed on the screen (operation icon and counter display etc.) can be displayed/ not displayed on the TV. (l 77) [DATE/TIME] [OFF]/[TIME]/[DATE]/[DATE&TIME] It is possible to change the date and time display mode. ≥ You can also show or change the date and time display by repeatedly pressing the DATE/TIME button on the wireless remote control.
AG-AC90-VQT4M99_mst.book 98 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [FACE FRAMING] Detected faces appear with frames in the Intelligent Auto Mode. [OFF]: Cancel the setting. [PRIMARY]: Only the prioritized face framing is displayed. [ALL]: All face detection framings are displayed. ≥ Up to 15 frames are indicated. Larger faces and faces nearer to the center of the screen take preference over others. ∫ Prioritized face framing Prioritized face framing is displayed as orange frames.
AG-AC90-VQT4M99_mst.book 99 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [SUB REC BUTTON] Enable/disable of the sub recording start/stop button on the handle can be switched. [ON]: The sub recording start/stop button is enabled. [OFF]: The sub recording start/stop button is disabled. [SUB ZOOM] Enable/disable of the sub zoom lever on the handle can be switched. Zoom speed will be different depending on the setting. [OFF]: Sub zoom lever is disabled. [LOW]: Sub zoom lever is enabled.
AG-AC90-VQT4M99_mst.book 100 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Other Functions Menu items displayed are different depending on the position or setting of the mode switch. MENU : [OTHER FUNCTION] # desired setting [FORMAT CARD] The SD card can be formatted. (l 28) ≥ Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, disc etc.
AG-AC90-VQT4M99_mst.book 101 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [CLOCK SET] Set date and time. (l 23) [TIME ZONE] Set the time difference from Greenwich Mean Time. (l 23) [ALERT SOUND] [OFF]/ (Volume low)/ (Volume high) Touch screen operation, start and stop of recording can be confirmed with this sound. 2 Beeps for 4 times When an error occurs. Check the sentence displayed on the screen.
AG-AC90-VQT4M99_mst.book 102 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [QUICK POWER ON] [ON]/[OFF] The unit is put into recording pause approx. 2 seconds when the unit is turned on with the mode set to . ≥ Depending on the recording conditions, start time may be longer than 2 seconds. ≥ In the quick power on mode, the zoom magnification becomes approximately 1k. [TV ASPECT] [16:9]/[4:3] Change the menu setting to display the images correctly. (Check the TV setting.
AG-AC90-VQT4M99_mst.book 103 ページ ２０１２年９月２５日 火曜日 午後１２時６分 [INITIAL SET] The menu settings or [CUSTOMIZE SCENE] back to the default setting. (l 84) [ALL]: This is for initializing all menus. [SCENE]: This is for initializing the setting of customize scene. ≥ Settings for [REC FORMAT], [MEDIA SELECT], [CLOCK SET] and [LANGUAGE] will not be changed. [SYSTEM INFO] The version of the firmware of this device is displayed. [UPDATE] The firmware of this device is updated.
AG-AC90-VQT4M99_mst.book 104 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Video Setup ≥ Change the mode to and touch the play mode select icon. Then, set [VIDEO/PICTURE] to [VIDEO]. (l 65) MENU : [VIDEO SETUP] # desired setting [REPEAT PLAY] [ON]/[OFF] Playback of the first scene starts after playback of the last scene finishes when set to [ON]. (l 70) [RESUME PLAY] [ON]/[OFF] If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped when set to [ON].
AG-AC90-VQT4M99_mst.
AG-AC90-VQT4M99_mst.book 106 ペ ペ ペ ２ ２ ２ ２ 年９ 月２ ２ 日 火火日 午午２ ２ 時６ 分 C 5.
AG-AC90-VQT4M99_mst.book 107 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Display Messages Major confirmation/error messages to be indicated on the screen in text. CHECK CARD. This card is not compatible or it cannot be recognized by the unit. If this message appears even though motion pictures and still pictures are recorded on an SD card, the card may be unstable. Reinsert the SD card, then turn the unit off and then on again. INVALID/CANNOT SET.
AG-AC90-VQT4M99_mst.book 108 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Power Problem “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.” is displayed. Check points ≥ The unit has automatically detected an error. Restart the unit by turning off and on. ≥ The unit will be turned off in about 1 minute if the unit is not turned off and on. ≥ Repair is needed if it is repeatedly displayed even if it is restarted. Detach the power connected, and consult the dealer who you purchased this unit from.
AG-AC90-VQT4M99_mst.book 109 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Playback Problem Check points Scenes/still pictures cannot be played back. ≥ Any scenes/still pictures where the thumbnails are displayed as cannot be played back. Scenes/still pictures cannot be deleted. ≥ Release the protect setting. (l 74) ≥ Any scenes/still pictures where the thumbnails are displayed as cannot be deleted. If the scenes/still pictures are unnecessary, format the media to erase the data.
AG-AC90-VQT4M99_mst.book 110 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Others Problem Check points If the SD card is inserted in this unit, it is not recognized. ≥ If the SD card is formatted on a PC, it may not be recognized by this unit. Use this unit to format SD cards. (l 28) The wireless remote control does not function. ≥ [REMOTE CONTROL] of the [OTHER FUNCTION] is [OFF]. (l 25) ≥ The button-type battery of the wireless remote control may be run out. Replace it with a new button-type battery.
AG-AC90-VQT4M99_mst.book 111 ページ ２０１２年９月２５日 火曜日 午後１２時６分 About recovery If faulty management information is found, the messages may appear and a repair is performed. (Repairing may take time depending on the error.) ≥ is displayed when abnormal management information is detected when the scenes are displayed in thumbnail. ∫ AVCCAM Restorer Restoration can be performed using AVCCAM Restorer. It can be downloaded from the website below. http://pro-av.panasonic.
AG-AC90-VQT4M99_mst.book 112 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
AG-AC90-VQT4M99_mst.book 113 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Do not swing the unit around, shake it by, or allow it hang from the handle ≥ Do not jar, swing, or shake the unit by its handle. Any strong jolt to the handle may damage the unit or result in personal injury. Do not allow the cord to drag on the ground or pull a connected cord along the passage ≥ The cord will be damaged, causing fire or electrical shock, when the cord gets caught by the feet, excite will also cause personal injury.
AG-AC90-VQT4M99_mst.book 114 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Prepare spare batteries when going out for recording. ≥ Prepare batteries enough to last for 3 to 4 times the period you are planning to record for. Cold places such as a ski resort can shorten recording time. If you drop the battery accidentally, check to see if the terminals are damaged. ≥ When this unit or battery charger is attached with the terminal part in a deformed state, this unit or battery charger may be damaged.
AG-AC90-VQT4M99_mst.book 115 ページ ２０１２年９月２５日 火曜日 午後１２時６分 About the SD card LCD monitor/viewfinder When disposing of or giving away the SD card, note that: ≥ Formatting and deletion of this unit or computer only changes the file management information and does not completely delete the data in the SD card. ≥ It is recommended that the main SD card is either physically destroyed or the SD card is physically formatted using this unit when disposing of or giving away the SD card.
AG-AC90-VQT4M99_mst.book 116 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Others About copyright ∫ Carefully observe copyright laws IMPORTANT “Unauthorized recording of copyrighted television programs, video tapes and other materials may infringe the right of copyright owners and be contrary to copyright laws.” ∫ Licenses ≥ SDXC Logo is a trademark of SD-3C, LLC. ≥ “AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation.
AG-AC90-VQT4M99_mst.book 117 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Others Recording modes/approximate recordable time ≥ SD cards are only mentioned with their main memory size. The stated times are the approximate recordable times for continuous recording.
AG-AC90-VQT4M99_mst.book 118 ページ ２０１２年９月２５日 火曜日 午後１２時６分 Others Approximate number of recordable pictures ≥ SD cards are only mentioned with their main memory size. The stated number is the approximate number of recordable pictures. Picture size Aspect ratio SD card 3 M 2304k1296 16:9 2.2M 1728k1296 4:3 4 GB 16 GB 2300 9500 3100 12500 64 GB 39000 52000 ≥ Maximum number of recordable pictures that can be displayed is 9999. If the number of recordable pictures exceeds 9999, R 9999+ is displayed.
AG-AC90-VQT4M99_mst.book 119 ページ Web Site: http://panasonic.
