Operating Instructions Amplified Cordless Telephone Model No. KX-TGM430 KX-TGM460 Before initial use, see “Getting Started” on page 13. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 95. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Please register your product: http://shop.panasonic.
Table of Contents Introduction Model composition .................4 Accessory information ............4 Graphical symbols for use on equipment and their descriptions ............................7 Using assistive listening devices .................................33 Important Information For your safety .......................8 Important safety instructions ...........................10 For best performance ...........10 Other information ..................11 Specifications .......................
Table of Contents Link to Cell app .....................68 Text message (SMS) alert ....69 Alert settings for your DECT phone ...................................69 Using a Bluetooth headset (optional) ..............................70 Answering System for Landline Answering system for landline .................................72 Turning the answering system on/off ....................................72 Greeting message ................72 Listening to messages ..........
Introduction Model composition Base unit Handset Part No. Part No. KX-TGM430 KX-TGM430 KX-TGMA44 1 KX-TGM460 KX-TGM460 KX-TGMA45 1 Series Model No. KX-TGM430 series KX-TGM460 series Quantity Accessory information Supplied accessories No.
Introduction Accessory item Model number/Specifications Rechargeable batteries HHR-4DPA*1 R To order, please visit http://shop.panasonic.com/support Battery type: – Nickel metal hydride (Ni-MH) – 2 x AAA (R03) size for each handset Headset KX-TCA93, KX-TCA430 Range extender KX-TGA407*2 Key detector KX-TGA20*3 *1 *2 *3 Replacement batteries may have a different capacity from that of the supplied batteries.
Introduction Your Bluetooth cellular phone*1: 2 max. (for cellular calls: page 35) Your Bluetooth headset*1: 1 max. (for a wireless hands-free conversation: page 70) *1 Your cellular phone and headset must be Bluetooth wireless technology compatible. For more details and the list of compatible cellular phones, please visit our Web site: http://shop.panasonic.com/bluetooth-phone Trademarks R The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Introduction Graphical symbols for use on equipment and their descriptions Symbol Explanation Symbol Explanation Alternating current (A.C.) Class P equipment (equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) Direct current (D.C.
Important Information For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet.
Important Information Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The product operates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).) R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so.
Important Information Note when using alkaline batteries for power backup R The batteries should be used correctly, otherwise the unit may be damaged due to battery leakage. R Do not charge, short-circuit, disassemble, or heat the batteries. R Do not dispose of batteries in a fire. R Remove all the batteries when replacing. R Do not mix old, new or different types of batteries. R It is recommended that batteries are replaced annually. R It is recommended that batteries are replaced after a power outage.
Important Information R The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 °C (32 °F) or greater than 40 °C (104 °F). Damp basements should also be avoided. R The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc.
Important Information Specifications R Standard: Bluetooth wireless technology 2.1 R Frequency range: 1.92 GHz to 1.93 GHz (DECT) 2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption: Base unit*1: Standby: 1.0 W Maximum: 4.5 W Base unit*2: Standby: 1.2 W Maximum: 8.5 W R Operating conditions: 0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry) *1 KX-TGM430 *2 KX-TGM460 12 For assistance, please visit http://shop.
Getting Started Setting up Connections R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode to use this unit more conveniently (page 37). Connect the AC adaptor to the unit by pressing the plug firmly. Fasten the cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click.
Getting Started Handset battery charging 2 rechargeable Ni-MH batteries are installed in the handset at the time of shipment. Before initial use: Remove the yellow insulation sheet before using the handset. Charge for about 7 hours. R Confirm “Charging” is displayed (1). R When the batteries are fully charged, “Fully charged” is displayed. 1 R Follow the directions on the display to set up the unit. Handset battery level Icon Battery level High Medium Low Needs charging.
Getting Started *1 If eco mode is on and booster is off. Note: R Actual battery performance depends on usage and ambient environment. Handset battery installation (for replacement) R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (1). R Do NOT use alkaline/manganese/Ni-Cd batteries. R Confirm correct polarities ( , ). 1 Base unit backup batteries 2 rechargeable Ni-MH batteries are installed in the base unit at the time of shipment.
Getting Started Operation Operating time In continuous use 3 hours max. Not in use (standby) 4 hours max. Note: R Battery performance depends on the type of batteries. R Actual battery performance depends on usage and ambient environment. R If the base unit is running on battery power, the brightness of the message counter on the base unit is reduced to save battery power. R When the base unit is running on battery power, the maximum ringer volume of the base unit will be reduced.
Getting Started 4 Close the cover (D), then reconnect the telephone line cord (E). C A B D E Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.
Getting Started Controls Handset A J K C L D B E M A A B F G H I N O P Belt clip holes R The belt clip comes attached to the handset at the time of shipment. Speaker MTONEN (Tone control) MjN/MkN (VOL.: Volume up/down) MFLASHN MTALKN Dial keypad *: Temporary tone dialing 0: ( ) Ringer off Headset jack R This jack is used to connect an optional headset (page 4) or a user-supplied neckloop to the handset. You must set the “Headset type” setting to match the type of device connected (page 34).
Getting Started MZN (SP-PHONE: Speakerphone) Microphone Message indicator Receiver Display MOFFN MSLOWN (SLOW TALK) SLOW TALK indicator MBOOSTN BOOST indicator R Light off: Volume booster is turned off. Light in red: Volume booster is turned on. Note that when the BOOST indicator is lit in red, the volume booster feature is enabled and the product may emit sounds at very high volume.
Getting Started Base unit C A B L D E F G M N Q PO Charge contacts Speaker CELL 1 indicator CELL 2/HEADSET indicator MRINGER OFFN RINGER OFF indicator MFLASH/CALL WAITN MLOCATOR/INTERCOMN R You can locate a misplaced handset by pressing MLOCATOR/INTERCOMN.
Getting Started MZN (SP-PHONE: Speakerphone) SP-PHONE indicator (Z) Message indicator Microphone M N (PLAY/STOP) New Message/Play indicator ( ) MANSWER ON/OFFN ANSWER ON/OFF indicator ( ) Display icons/Indicators Handset display items Item Meaning Within base unit range Out of base unit range Sound enhancer is on. (page 42) The landline is in use. R When flashing: The call is put on hold. R When flashing rapidly: An incoming call is now being received. A cellular line is in use.
Getting Started Item Meaning Silent mode is on. (page 62) Call sharing mode is off. (page 60) Alarm is on. (page 61) Handset number Battery level Blocked call (page 46) In use Answering system is being used by another handset or the base unit. Cell1 in use Someone is using the corresponding line. Cell2 in use C1&C2 in use Line in use *1 *2 *3 *4 Corresponding lines (1, 2: cellular line) are indicated next to the item.
Getting Started Status Meaning Light off – A cellular phone is not paired to the base unit. – A cellular phone is not connected to the base unit (page 37). Bluetooth HEADSET indicator on the base unit The CELL 2/HEADSET indicator shows the Bluetooth headset status. Status Meaning On A Bluetooth headset is connected to the base unit. Ready to use it. Flashing – A Bluetooth headset is in use. – The base unit is searching for the paired Bluetooth headset.
Getting Started 2 MbN: Select the desired setting. a MSAVEN a MOFFN R The setting will be applied in about 5 seconds. Date and time 1 MMENUN#101 2 Enter the current month, date, and year by selecting 2 digits for each. Example: July 12, 2016 07 12 16 MOKN 3 4 Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each. Example: 9:30 09 30 *: Select “AM” or “PM”. 5 6 MSAVEN a MOFFN Note: R When English is selected as the display language, 12-hour clock format is used.
Getting Started Other settings Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”. “Tone”: For tone dial service. “Pulse”: For rotary/pulse dial service. 1 MMENUN#120 2 MbN: Select the desired setting. a MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.
Accessibility Accessibility This product is designed to provide not only optimal volume, but optimal sound quality as well, ensuring that every call is heard loud and clear. Tone control This feature clarifies the voice of the person you are talking to, producing a more natural-sounding voice that is easier to hear and understand. This feature can be set for each unit. The following settings are available.
Accessibility 3 MbN: Select the desired setting. a MOKN R If you select “Custom tone”, select the desired type. a MOKN R The selected setting is shown on the handset display while talking. Base unit 1 Press and hold MTONEN for about 2 seconds while talking. 2 Press MjN or MkN repeatedly to select the desired setting. R The selected setting flashes on the message counter while talking. 3 To exit, press MTONEN or wait for about 5 seconds.
Accessibility Note: R Noise reduction is automatically turned on when the booster is turned on. In this case, the menu that allows you to turn off noise reduction is not shown even after you press MMENUN while on a call. is not shown if the noise reduction feature was turned off before you turned on the R volume booster. R If the auto boost feature is turned on (page 28), volume booster turns on automatically when you make or answer a call.
Accessibility BOOST indicator Volume booster Available volume settings Light in red Turned on KX-TGM430 series Default Receiver: 12–40 15 Speakerphone: 18–30 21 Headset: 12–40 15 KX-TGM460 series Receiver: 12–50 15 Speakerphone: 18–40 21 Headset: 12–50 15 Speech booster (making your voice louder) This feature allows you to increase the volume of your voice heard by the other party. This feature can be set for each handset.
Accessibility – Name or phone numbers when searching the phonebook, caller list, redial list, memory dial entries, and call block list. Base unit: – Name or phone numbers when confirming memory dial keys (MM1N – MM3N). Setting the talking keypad and phonebook You can enable this feature by setting its volume to “High” or “Low”, and disable it by setting its volume to “Off”. The default setting is “Off”. This feature can be set for each unit.
Accessibility Message indicator The message indicator on the handset and base unit can indicate unit status, as explained below. Indicator Status Flashing rapidly – Outside call or intercom call is being received or on hold. (page 40, 41, 44) – The handset alarm is sounding. (page 61) – Notifications for Link to Cell app or text message (SMS) alert is being received. (page 69) Flashing slowly – There are new messages. (page 73) – There are new voicemails. (page 80) – There are missed calls.
Accessibility Slow talk This feature slows down the speed of the other party’s voice, which can make it easier to understand phone conversations, answering system messages, etc. Slow talk is available in the following situations. – When talking on outside calls (including conferences) – When playing answering system messages – When screening calls 32 For assistance, please visit http://shop.panasonic.
Accessibility Handset / Base unit – When talking on outside calls or screening calls, press MSLOWN on the handset or MSLOW TALKN on the base unit. Switches between normal speed and slow speed. SLOW TALK indicator Status Light off Normal speed Light on Slow speed – When playing answering system messages, press MSLOWN on the handset or MSLOW TALKN on the base unit more than once. Switches between normal speed, slow speed, and slower speed.
Accessibility To use with a T-coil-equipped hearing aid 1 Set your hearing aid to the "T" setting. R Refer to your hearing aid’s operating instructions for details. 2 Hold the handset near your hearing aid when talking. To use a neckloop When using a neckloop with the handset, you can speak using the neckloop’s microphone or using the handset’s microphone. Important: R You must set the headset type before use (page 34). 1 Connect the neckloop to the headset jack on the side of the 2 handset.
Link to Cell Link to cell feature You can connect your base unit and cellular phone using Bluetooth wireless technology, so that you can make or answer cellular calls using your phone system. This allows you to: – use the unit to talk on cellular calls even if some areas of your home have poor cellular reception, simply by placing your cellular phone in an area with good reception. – talk on cellular calls even if your cellular phone is in your pocket or bag.
Link to Cell 2 MbN: “Yes” a MSELECTN R When the cellular phone is unpaired, the CELL indicator is turned off. 3 MOFFN Link to cell settings Selecting which unit receives cellular calls You can select which unit rings and receives calls for a cellular line. When “All” is selected, all handsets and the base unit ring. 1 For CELL 1: MMENUN#6271 For CELL 2: MMENUN#6272 2 MbN: Select the desired handset or “All”.
Link to Cell unit range. You can set the interval. The default setting is “1 min”. 2 Important: R When 3 Bluetooth devices (2 cellular phones and 1 headset) are paired to the base unit, only 2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its connection from other Bluetooth devices. To automatically resume the connection to Bluetooth devices, leave the auto connection on.
Link to Cell When you use the landline again Before connecting the telephone line to the base unit, select “Off” in step 2, “Cellular line only mode (If you do not use the landline)”, page 37. Cellular line selection This feature determines which cellular line is selected to make cellular calls when: – you press MCELLN on the handset. – you press MTALKN or MZN on the handset while the cellular line only mode is turned on.
Making/Answering Calls Making cellular calls Important: R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line*1). R Before making calls, confirm that the corresponding on the handset is displayed (page 21). *1 You cannot use a Bluetooth headset to talk on a cellular line.
Making/Answering Calls Making landline calls Answering calls 1 Using the handset 2 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. Press MTALKN to make the call. R To make the call using the speakerphone, press MZN. 3 When you finish talking, press MOFFN or place the handset on the base unit or charger. Note: R While talking, you can switch between the receiver and the speakerphone by pressing MZN.
Making/Answering Calls Adjusting the ringer volume Handset n While the handset is ringing for an incoming call: Press MjN or MkN on the side repeatedly to select the desired volume. n While the handset is in standby mode: Press MjN or MkN on the side repeatedly to select the desired volume for landline call. R To turn the ringer off, press MkN repeatedly. Base unit n While the base unit is ringing for an incoming call: Press MjN or MkN repeatedly to select the desired volume.
Making/Answering Calls Flash for landline calls Handset / Base unit Handset sound enhancer This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary. R When this feature is turned on, is displayed.
Making/Answering Calls n While another unit is on a landline call: To join the conversation, press MTALKN. R To put the outside call on hold: MMENUN a MbN: “Hold” a MSELECTN To resume the conference: MMENUN a MbN: “Conference” a MSELECTN R To cancel the conference: MMENUN a MbN: “Stop conference” a MSELECTN You can continue the conversation with the outside caller. Base unit To join the conversation, select the line that is being used for the call: – for a cellular line press MCELL 1N or MCELL 2N.
Making/Answering Calls 1 2 During a conversation using a cellular phone, press MCELLN. R The call is transferred to the handset in the following situations. – Only 1 cellular phone is paired. – A specific line is set to make cellular calls (page 38). MbN: Select the corresponding cellular phone. a MSELECTN R The call is transferred to the handset. n From the base unit to a cellular phone During a cellular call, press and hold MCELL 1N or MCELL 2N until the SP-PHONE indicator goes out.
Making/Answering Calls Making an intercom call Handset 1 MMENUN a MbN: “Intercom” a MSELECTN 2 MbN: Select the desired unit or “Voice paging”. a MSELECTN R If you select “Voice paging”, speak into the microphone after the beep. Your voice will be heard from the speakers of the base unit and all handsets. Voice paging ends when you press MOFFN or when a handset user or base unit user answers your voice page. 3 When you finish talking, press MOFFN.
Call Block Call block In the following situations, you can disconnect the current call and add the caller’s phone number to the call block list. – When an outside call is being received – When an outside caller’s message is being recorded – When you are talking on an outside call 1 When an outside call is being received or When an outside caller’s message is being recorded Press MBLOCKN on the handset.
Call Block Press MEDITN repeatedly until the phone number is shown in the 10-digit format. a MSAVEN a MbN: “Call block” a MSELECTN a Go to step 4. 3 MbN: “Save call block” a MSELECTN MbN: “Yes” a MSELECTN 1 2 MMENUN#217 4 5 Edit the phone number if necessary (24 digits max.). a MSAVEN a MOFFN 3 MbN: Select the desired setting.
Phonebook Phonebook You can add 3,000 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 49). The following groups are available: – Group 1: “Home”*1 (default) – Group 2: “Cell 1”*1 – Group 3: “Cell 2”*1 – Group 4-9: You can change the group name for each group. *1 For groups 1-3, the group names cannot be changed. Important: R All entries can be shared by any registered handset.
Phonebook 2 MbN: Select the desired entry. a MSELECTN R To edit the number, press * (Edit) repeatedly until the phone number is shown in the desired format. 3 4 5 MSAVEN MbN: “Phonebook” a MSELECTN Continue from step 3, “Editing entries”, page 50. n When a cellular phone is not paired: 1 MCN CID 2 MbN: Select the desired entry. a MMENUN R To edit the number: MbN: “Edit” a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format.
Phonebook MbN: Select the desired cellular phone. a MSELECTN n Using a landline: MTALKN Editing entries 1 2 3 4 5 Find the desired entry (page 49). MMENUN a MbN: “Edit” a MSELECTN Edit the name if necessary. a MOKN Edit the phone number if necessary. a MOKN MbN: Select the desired group (page 49). a MSELECTN 2 times a MOFFN Erasing entries Erasing an entry 1 Find the desired entry (page 49).
Phonebook Editing an entry 1 Press and hold the desired memory dial key (1 to 9). a MMENUN 2 3 4 MbN: “Edit” a MSELECTN Edit the name if necessary. a MOKN Edit the phone number if necessary. a MOKN a MSELECTN a MOFFN Erasing an entry 1 Press and hold the desired memory dial key (1 to 9). a MMENUN 2 3 MbN: “Erase” a MSELECTN MbN: “Yes” a MSELECTN a MOFFN To confirm an entry Press the desired memory dial key (MM1N to MM3N). R The unit announces the name or phone number of the entry.
Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 MMENUN 2 3 4 Press MCN or MDN to select the desired main menu. a MSELECTN Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. 2 Select the desired setting. a MSAVEN Note: R To exit the operation, press MOFFN.
Programming Sub-menu 1 Sub-menu 2 Settings Code New message alert*1 Outgoing call – On/Off On #338 75 Outgoing call – Notification to Settings Outgoing call – Remote code Activate Base unit beep On #339 75 Ring count*1 Toll saver 2-7 rings <4 rings> #211 77 Recording time*1 <3 min> 1 min Greeting only*2 #305 78 Remote code*1 <111> #306 76 Screen call – Handset Off #310 77 Screen call – Base unit*1 Off #G310 Answer on*1 Answer off*1 Mai
Programming Main menu: “Bluetooth” Sub-menu 1 Sub-menu 2 Link to cell – 1:Add new device*4 (for CELL 1) – 2:Add new device*4 (for CELL 2) Connect*1/ Disconnect*1 Settings Code – #6251*5 Ringer volume – Handset Off–6 <6> Ringer volume – Base unit*1 Off–10 <1> Ringer tone – Handset*7, *8, *9 *5 *6 #6291*5 Ringer tone – Base unit*1, *8, *9 *5 *6 #G6291*5 Select unit to ring*1 Handset 1-6 #6271*5 Ring as cell (limited)*1
Programming Sub-menu 1 Sub-menu 2 Settings Code Settings Auto connect*1 Off <1 min> 3 min 5 min 10 min #632 36 #633 38 Cell line only mode*1 On – #157 37 Cell line select – Handset Cellphone 1*4 Cellphone 2*4 #634 38 Cell line select – Base unit*1 *4 Cellphone 2*4 #G634 Set PIN*1 <0000> Cell area code*1 #619 38 International code*1 – #117 67 Country code*1 – #118 prefix*1 – #119 Trunk Main menu: “Set date & time” Sub-menu 2 Sub-menu 1 Memo
Programming Main menu: “Settings” Sub-menu 1 Sub-menu 2 Settings Code Ring adjustments Ringer volume (Incoming) – Handset*3 Off–6 <6> #160 – Ringer volume (Incoming) – Base unit*1, *3 Off–10 <1> #G160 – Intercom ringer volume – Handset 1–6 <6> #175 – Intercom ringer volume – Base unit*1 1–10 <1> #G175 – Ringer tone (Incoming) – Handset*3, *7, *8, *9 #161 – Ringer tone (Incoming) – Base unit*1, *3, *8, *9 #G161 – Intercom ringer tone – Handset*7, *8, *9 <
Programming Sub-menu 1 Sub-menu 2 Settings Code Audio settings Talking dial – Handset Low High #750 Talking dial – Base unit*1 Low High #G750 Talking caller ID – Handset Off #162 Talking caller ID – Base unit*1 On #G162 Auto boost On #782 28 Boost speech On #783 29 Key tone – Handset Off High #165 30 Key tone – Base unit*1 Off High #G165 Interrupt tone – Handset*11 Off #201 Interrupt tone – Base unit*1, *11 Off #G2
Programming Sub-menu 1 Sub-menu 2 Settings Key detector setting*12 – 1: Add new device (for Detector1)*13 – 2: Add new device (for Detector2) – 3: Add new device (for Detector3) – 4: Add new device (for Detector4) Change name*1 Detector1 #6561 Detector2*14 #6562*14 Detector3*14 #6563*14 Detector4*14 #6564*14 Registration – Code #6571 – – #6572*14 #6573*14 #6574*14 Deregistration – #6581 – #6582*14 #6583*14 #6584*14 Call block*1 Block a single number – Block range of numbers – #2
Programming Sub-menu 1 Sub-menu 2 Settings Code Message indicator Handset – Incoming call Off #278 Handset – New message Off Handset – New VM Off Handset – Missed call On Handset – Alarm Off Handset – Application alert Off Base unit*1 – Incoming call Off Base unit*1 – New message Off Base unit*1 – New VM Off Base unit*1 – Missed call On Base unit*1 – Application alert Off 31 #G278 Caller ID edit (Caller ID number auto edi
Programming Sub-menu 1 Sub-menu 2 – Call sharing*1 Registration Main menu: Code #194 42 Register handset – #130 63 Deregistration*2 – #131 63 Neckloop with Mic Neckloop w/ o Mic #786 34 Display Español #110 23 Announcement*1 Español #112 23 Headset type – Change language Settings Off “Customer support” Operation Code Displaying customer support Web address.
Programming *12 This setting is available when you have the key detector (KX-TGA20). Read the installation manual for more information on the key detector. *13 For models with supplied key detectors, the display shows “1: Detector1”. *14 If you register 2 or more key detectors. *15 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature. *16 The flash time depends on your telephone exchange or host PBX.
Programming stop the snooze function before making the call. Silent mode Silent mode allows you to select a period of time during which the handset and/or base unit will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit. Using the phonebook’s group feature (page 49), you can also select groups of callers whose calls override silent mode and ring the unit (Caller ID subscribers only).
Programming Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to the base unit. Important: R See page 5 for information on the available model. Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset: MMENUN#130 2 Base unit: Press and hold MLOCATOR/INTERCOMN for about 5 seconds.
Caller ID Service Using Caller ID service Important: R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest.
Caller ID Service 3 To call back, press MSELECTN. To exit, press MOFFN. 2 MbN: Select the desired entry. a MMENUN 4 MCELLN R The unit starts dialing immediately in the following situations. – Only 1 cellular phone is paired. – A specific line is set to make cellular calls (page 38). 3 4 MbN: “Edit” a MSELECTN 5 MTALKN 5 MbN: Select the desired cellular phone. a MSELECTN n Using a landline 1 MCN CID 2 Press MCN to search from the most recent call, or MDN to search from the oldest call.
Caller ID Service Erasing all caller information 1 2 66 MCN CID MERASEN a MbN: “Yes” a MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.
Using Bluetooth® Devices Copying phonebook from a cellular phone (phonebook transfer) You can copy phonebook entries from the paired cellular phones or other cellular phones (not paired) to the unit’s phonebook. A cellular phone must be compatible with Bluetooth wireless technology. Important: R Your cellular phone must support Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If a copied entry has 2 or more phone numbers, each phone number (6 max.
Using Bluetooth® Devices – “Trunk prefix”: A trunk prefix; the initial digit(s) to be dialed in a domestic call, prior to the area code. 1 2 MMENUN To store “International code”: #117 To store “Country code”: #118 To store “Trunk prefix”: #119 3 Enter the desired number. a MSAVEN a MOFFN Note: R After you copy the entries, confirm that the numbers were transferred correctly.
Using Bluetooth® Devices – Android phone: [Application Alerts manager]*1 must be turned on. – Handset: “Alert On/Off” must be turned on (page 69). R If this feature does not work, turn on your device’s Bluetooth feature, unplug the base unit’s AC adaptor, and remove the batteries from the base unit. Then, reconnect AC adaptor and insert the batteries into the base unit. *1 Turning on [Application Alerts manager] Use the following procedure after installing the Link to Cell app. Android 2.
Using Bluetooth® Devices 2 MbN: Select the desired setting. a MSAVEN a MOFFN 3 If your headset’s PIN is “0000”, go to step 4. If your headset’s PIN is not “0000”, press MCLEARN, then enter your headset’s PIN. R Typically, the default PIN is “0000”. Refer to the headset’s operating instructions. 4 Press MOKN, then wait until a long beep sounds.
Using Bluetooth® Devices Operating a Bluetooth headset using a landline Important: R Refer to your headset’s operating instructions for details. Making landline calls with your headset Base unit 1 Press your headset’s button referring to your headset’s operating instructions. 2 Press the desired memory dial key (MM1N to MM3N). 3 When you finish talking, press your headset’s button referring to your headset’s operating instructions.
Answering System for Landline Answering system for landline The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting “Greeting only” as the recording time setting (page 78). Important: R Make sure the unit’s date and time setting is correct (page 24). Memory capacity (including your greeting message) The total recording capacity is about 18 minutes.
Answering System for Landline Using a pre-recorded greeting message The unit provides 2 pre-recorded greeting messages: – If you reset to pre-recorded greeting or do not record your own greeting message, the unit plays a pre-recorded greeting asking callers to leave a message. – If the message recording time (page 78) is set to “Greeting only”, callers’ messages are not recorded and the unit plays a different pre-recorded greeting message asking callers to call again.
Answering System for Landline Operating the answering system MMENUN a MbN: “Answering device” a MSELECTN Key Operation MjN or MkN Adjust the receiver/speaker volume (during playback) 1 or MFN Repeat message (during playback)*1 2 or MEN Skip message (during playback) 3 Enter the “Settings” menu 4 Play new messages 5 Play all messages 6 Play greeting message 76 Record greeting message 8 Turn answering system on MPAUSEN Pause message*2 9 or MSTOPN Stop recording Stop playback 0 Turn an
Answering System for Landline Advanced new message alerting features 4 n By entering a phone number: 1 MMENUN#338 Audible message alert This feature allows the base unit to beep to inform you of a new message arrival when new messages are recorded. The base unit beeps 2 times every minute until you listen to the messages, if the “Base unit beep” setting is turned on. The default setting is “Off”. 1 2 MMENUN#339 MbN: Select the desired setting.
Answering System for Landline Activating/inactivating the remote access code to play messages If you activate this feature, you must enter the remote access code (page 76) to play the new message from the new message alert call. This is so that unauthorized parties cannot listen to your messages. The default setting is “Inactivate”. – “Inactivate”: You can listen to the message by pressing 4 to play new messages (without entering the remote access code).
Answering System for Landline 1 to perform a specific operation, or press 2 to listen to more available operations. n When the Spanish voice guidance is selected To start the voice guidance, press 9. The voice guidance announces the available remote commands (page 77). Note: R If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call.
Answering System for Landline Caller’s recording time You can change the maximum message recording time allowed for each caller. The default setting is “3 min”. 1 2 MMENUN#305 MbN: Select the desired setting. a MSAVEN a MOFFN Selecting “Greeting only” You can select “Greeting only” which sets the unit to announce a greeting message to callers but not record messages. Select “Greeting only” in step 2 on “Caller’s recording time”, page 78.
Useful Information MDN (Pause) to add pauses (page 40) between the access number and the password as necessary. Contact your phone service provider for the required pause time. Voicemail service for landline In addition to your unit’s answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider.
Useful Information Listening to voicemail messages When new messages have been recorded: – “Voicemail msg. via phone co.” is displayed if message indication service is available. – The message indicator flashes slowly if the handset or base unit message indicator’s “New VM” setting is enabled (page 31). 1 MMENUN#330 R The speakerphone turns on. 2 3 Follow the pre-recorded instructions.
Useful Information 3 Insert the hooks on the wall mounting adaptor into holes (1) and (2) on the base unit. Fit the slots of the unit onto the corresponding wall phone plate tabs for (4) and (5) respectively. 1 2 1 2 1 4 5 4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. 4 2 3 5 To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B).
Useful Information Error messages Display message Cause/solution Ask phone company for VM access # R You have not stored the voicemail access number. Store the number (page 79). Busy R No cellular phone is paired to the base unit. Pair a cellular phone (page 35). R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again.
Useful Information Display message Cause/solution Use rechargeable battery. R A wrong type of battery such as alkaline or manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 5, 9. Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then insert them into the handset again.
Useful Information Problem Cause/solution I cannot connect a cellular phone to the base unit. R Confirm that your cellular phone is turned on. R Confirm that your cellular phone is within base unit range (page 21, 35). R Your cellular phone’s Bluetooth feature is turned off. Turn it on. R Depending on the state of the wireless environment, such as the presence of any electrical interference, there may be a delay even if the auto connection feature is turned on.
Useful Information Accessibility Problem Cause/solution I cannot search the phonebook, caller list, redial list, memory dial, or call block list. R Other units are in use and the system is busy. Try again later. The unit does not announce names or phone numbers when I search the phonebook, caller list, etc. R The default setting for the talking keypad and phonebook feature is “Off”. Change the setting (page 29). R Other units are in use and the system is busy. Try again later.
Useful Information Problem Cause/solution I fully charged the batteries, but – still flashes, – is displayed, or – the operating time seems to be shorter. R Clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 15). Making/answering calls, intercom Problem Cause/solution R The handset is too far from the base unit. Move closer. R The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit.
Useful Information Problem Cause/solution I cannot make or answer cellular calls with the handset or base unit. R Depending on the cellular phone’s compatibility (page 6), you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. R Make sure that the CELL indicator lights up on the base unit and is displayed on the handset (page 21, 22). R Make sure that the cellular phone is connected to the base unit (page 37).
Useful Information Problem Cause/solution Caller information is displayed or announced late. R Depending on your phone service provider, the unit may display or announce the caller’s information at the 2nd ring or later. R Move closer to the base unit. Caller information is not announced. R The ringer volume for landline is turned off. Adjust the ringer volume (page 56). R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 54).
Useful Information Using Bluetooth devices Problem Cause/solution I cannot copy phonebook entries from a cellular phone. R Confirm that the cellular phone supports Bluetooth wireless technology. R Confirm that the cellular phone supports the Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If the cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from the cellular phone.
Useful Information Problem Cause/solution App alert is not displayed or announced. or Text message alert is not displayed or announced. R Confirm that the cellular phone supports the Message Access Profile (MAP) specification to use text message alert feature. R Confirm that the cellular phone supports the Serial Port Profile (SPP) specification to use App alert feature. R Confirm that the [Application Alerts manager] setting of your Android phone is turned on. R “Alert On/Off” is set to “Off”.
Useful Information Problem Cause/solution The unit does not emit the specified number of rings. R If the first ring is turned off (“No”) (page 47), the number of rings decreases by 1 from the specified number of rings. Bluetooth PIN Problem Cause/solution I cannot remember the PIN. R Change the PIN using the following method. 1 2 3 4 MMENUN#619 *7000 Enter the new 4-digit PIN. a MOKN Enter the new 4-digit PIN again. a MSAVEN a MOFFN Voicemail Problem Cause/solution “Voicemail msg. via phone co.
Useful Information FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. L Registration No.............(found on the bottom of the unit) L Ringer Equivalence No. (REN).......0.
Useful Information manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules.
Useful Information Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. n To deactivate the charge only mode: – Press any key. – 24 hours passed after activating the charge only mode. Compatible with Hearing Aid T-Coil T TIA-1083 Charge only mode The charge only mode is the dedicated mode to charge the backup batteries of the base unit.
Guía Rápida Española Guía Rápida Española Para obtener ayuda, visite http://shop.panasonic.
Guía Rápida Española 96 Para obtener ayuda, visite http://shop.panasonic.
Guía Rápida Española Para obtener ayuda, visite http://shop.panasonic.
Appendix Customer services Shop Accessories! for all your Panasonic gear Go to hp://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & more… Customer Services Directory For Product Informa!on, Opera!ng Assistance, Parts, Owner’s Manuals, Dealer and Service info go to hp://shop.panasonic.
Appendix Limited Warranty (ONLY FOR U.S.A.
Appendix Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Index Index # A B C 3-way conference: 43 Accessibility Auto boost: 28 Booster (speech): 29 Booster (volume): 27 Headset type: 34 Message indicator: 31 Neckloop: 33 Talking dial: 29 Tone control: 26 Additional handset: 63 Alarm: 61 Answering calls: 40 Answering system Call screening: 77 Erasing messages: 73, 74, 77 Greeting message: 72 Greeting only: 78 Listening to messages: 73, 76 New message alerting: 75 Number of rings: 77 Recording time: 78 Remote access code: 76 Remote operation: 76 Ring count: 77
Index S T V W Intercom call (Handset): 56 Outside call (Base unit): 54, 56 Outside call (Handset): 54, 56 Rotary/pulse service: 42 Silent mode: 62 Sound enhancer: 42 SP-PHONE (Speakerphone): 40 Talking Caller ID: 64 Temporary tone dialing: 42 Time adjustment: 57 Transferring calls: 43 Troubleshooting: 83 TTY: 98 VM (Voicemail): 79 Voice announcement language: 23 Voice paging: 45 Voicemail: 79 Volume Receiver: 39 Ringer for intercom call (Base unit): 41, 56 Ringer for intercom call (Handset): 41, 56 Rin
Notes 103
IMPORTANT! If your product is not working properly. . . 1 Disconnect AC adaptor and remove batteries from base unit. 2 Reconnect AC adaptor and reinsert batteries into base unit. 3 Check if telephone line cord is connected. 4 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 5 Read troubleshooting page in the Operating Instructions. Visit our Web site: http://shop.panasonic.com/support L FAQ and troubleshooting hints are available.