Operating Instructions Cordless Telephone KX-TGD510 KX-TGD512/KX-TG3712 KX-TGD513 Cordless Telephone with Digital Answering Machine Model No. KX-TGD530 KX-TGD432/KX-TGD532 KX-TG3722/KX-TG732SK KX-TGD433/KX-TGD533 KX-TG3723/KX-TG733SK KX-TGD534/KX-TG734SK KX-TGD535 Model No. Model shown is KX-TGD510. Before initial use, see “Getting Started” on page 9. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference.
Table of Contents Introduction Answering System Model composition .......................................3 Accessory information ..................................3 Graphical symbols for use on equipment and their descriptions ..........................................5 Answering system (KX-TGD530 series) ....28 Turning the answering system on/off .........28 Greeting message ......................................28 Listening to messages ...............................28 Remote operation ................
Introduction Model composition Base unit Handset Part No. Part No.
Introduction *4 *5 *6 *7 *8 *9 *10 *11 KX-TGD534/KX-TG734SK KX-TGD535 PNJA1186Z (Black cord), PNJA1193Z (Transparent cord) PNKL1044Y2 (Black), PNKL1044Y1 (White) See page 4 for replacement battery information. The handset cover comes attached to the handset. PNYNTGDA50BR (Black), PNYNTGDA50WR (White) PNLC1077ZB (Black), PNLC1077ZW (White) B A C D E F Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 46).
Introduction Graphical symbols for use on equipment and their descriptions Symbol Explanation Symbol Explanation Alternating current (A.C.) Class P equipment (equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) Direct current (D.C.
Important Information R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. For your safety To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock.
Important Information R This product is unable to make calls when: – the handset batteries need recharging or have failed. – there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
Important Information Other information Specifications CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. R Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) R Frequency range: 1.92 GHz to 1.93 GHz R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption: Base unit*1: Standby: 1.0 W Maximum: 3.5 W Base unit*2: Standby: 1.0 W Maximum: 4.3 W Charger: Standby: 0.
Getting Started Battery installation Setting up Connections Connect the AC adaptor to the unit by pressing the plug firmly. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (1). R Do NOT use alkaline/manganese/Ni-Cd batteries. ).
Getting Started Battery charging Charge for about 7 hours. Note for battery charging Controls Handset R Clean the charge contacts with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. G Battery level Icon H Battery level High A Medium I B Low Needs charging. C Empty Ni-MH battery performance (supplied batteries) Operation Operating time D E In continuous use 10 hours max.*1 F Not in use (standby) 5 days max.
Getting Started – – – – – Display MOFFN ( ) MFLASHNMCALL WAITN Charge contacts Soft keys Navigator key MDN, MCN, MFN, or MEN: Scroll through various lists and items. VOL. (Volume: MDN or MCN): Adjust the receiver or speaker volume while talking. MFN W: View the phonebook entry. MEN REDIAL: View the redial list. MCN CID (Caller ID): View the caller list. Charge contacts Speaker MLOCATORN Message counter MjN/MkN (VOL.
Getting Started 4 Item Meaning Line in use Someone is using the line. Base unit display item (KX-TGD530 series) Item Meaning “Greeting only” is selected. Caller messages are not recorded. (page 31) Language settings Display language 1 2 MMENUN#110 MbN: Select the desired setting. a MSAVEN a MOFFN Voice announcement language (KX-TGD530 series) You can select the language used for the following features. – Answering system guidance – Talking Caller ID 1 2 MMENUN#112 MbN: Select the desired setting.
Making/Answering Calls Making calls 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 M N or MZN R To adjust the receiver or speaker volume, press MDN or MCN repeatedly. 3 When you finish talking, press MOFFN. Note: R To switch to the speaker, press MZN. To switch back to the receiver, press MZN/ M N. R In step 1, you can store the dialed phone number to the phonebook by pressing MSAVEN.
Making/Answering Calls Flash MFLASHN allows you to use the special features of your host PBX. Note: R To change the flash time, see page 23. For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your phone service provider. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone.
Call Block Single phone numbers and ranges of numbers can be stored in the call block list up to 150 items in total.
Call Block 4 Enter the phone number (24 digits max.). a MSAVEN a MOFFN Storing a range of number 1 2 3 4 MCALL BLOCKN 2 3 4 MbN: “Block range of numbers” a MSELECTN MMENUN a MbN: “Add” a MSELECTN Enter the desired number (2-8 digits). a MSAVEN a MOFFN 1 2 You can block calls when no phone number is provided, such as private callers or out of area calls. 3 3 MCALL BLOCKN MbN: “Block unknown CID” a MSELECTN MbN: Select the desired entry. To edit a number: MEDITN a Edit the number.
Phonebook Phonebook You can add 100 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook. Adding phonebook entries 1 2 3 4 5 MFN W a MMENUN MbN: “Add new entry” a MSELECTN Enter the party’s name. a MOKN Enter the party’s phone number. a MOKN MbN: Select the desired group. a MSELECTN 2 times a MOFFN Note: R In step 3, you can switch the language for entering characters. # a MbN: Select the desired language.
Phonebook MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN: Select the desired ringer tone. a MSAVEN Finding and calling from a phonebook entry pauses after the number and PIN as necessary (page 13). R If you have rotary/pulse service, you need to press * before pressing MFN W in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding * to the beginning of phone numbers you wish to chain dial (page 17).
Phonebook Erasing an entry 1 2 3 Press and hold the desired speed dial key (1 to 9). a MMENUN MbN: “Erase” a MSELECTN MbN: “Yes” a MSELECTN a MOFFN Making a call Press and hold the desired speed dial key (1 to 9). a M N For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1129_ver031.
Programming Menu list Scrolling through the display menus: MMENUN a Press MCN or MDN to select the desired main menu. a MSELECTN OR Using the direct command code: MMENUN a Enter the desired code. Example: Press MMENUN#101. R To exit the operation, press MOFFN. Display menu tree and direct command code table Main menu: W “Phonebook” Operation Code Page Viewing the phonebook entry. #280 18 Operation Code Page Viewing the caller list.
Programming Main menu: “Voicemail access” Operation Code Page Listening to voicemail messages. #330 32 Operation Code Page Paging the desired unit. #274 14 Settings Code Page – #101 12 Once Daily Weekly #720 24 Manual #226 – Operation Code Page Viewing the speed dial entry.
Programming Sub-menu 1 Sub-menu 2 Set date & time Date and time Talking caller ID*1 Key detector setting*5 – 1: Add new device (for Detector1)*6 – 2: Add new device (for Detector2) – 3: Add new device (for Detector3) – 4: Add new device (for Detector4) Settings Code Page – #101 12 Memo alarm – Alarm1-3 Once Daily Weekly #720 24 Time adjustment*3 Manual #226 – Handset Off #162 26 Base unit On #G162 Change name Detector1 #6561 Detector2
Programming Sub-menu 1 Sub-menu 2 Settings Code Page – #104 25 On #105 25 – Off #165 – Caller ID edit – Off #214 26 Auto talk – On #200 13 Set dial mode Pulse #120 12 Set flash time 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms <700 ms> 900 ms #121 14 Set line mode*8 A #122 – Off #194 14 Handset name – Display name – Key tone Set tel line – Call sharing Registration Change language Register
Programming *1 *2 *3 *4 *5 *6 *7 *8 KX-TGD530 series This menu is not displayed when scrolling through the display menus. It is only available in direct command code. This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select “Caller ID auto”. To turn this feature off, select “Manual”. (Caller ID subscribers only) To use this feature, set the date and time first (page 12).
Programming Important: R If you have set the alarm, the alarm sounds even if the silent mode is turned on. 2 Turning silent mode on/off Registering a handset to the base unit 1 2 3 MMENUN#238 MbN: Select the desired setting. a MSAVEN Follow the directions on the display to complete the operation. Changing the start and end time 1 2 1 2 3 If for some reason the handset is not registered to the base unit, re-register the handset.
Caller ID Service Using Caller ID service Important: R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is announced. Caller list Caller ID features When an outside call is being received, the caller information is displayed.
Caller ID Service Erasing selected caller information 1 2 3 MCN CID MbN: Select the desired entry. MERASEN a MbN: “Yes” a MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1129_ver031.
Answering System Answering system (KX-TGD530 series) The answering system can answer calls and record caller messages. If you do not want to record messages, select “Greeting only” as the recording time setting (page 31). Recording capacity The total recording time is about 17 minutes, including your greeting message. Up to 64 messages can be recorded. Note: R When message memory becomes full: – “Messages full” is shown on the handset display.
Answering System Operating the answering system during playback Key Operation MjN or MkN Adjust the speaker volume Operation 8 Turn answering system on MPAUSEN Pause message*1 9 or MSTOPN Stop recording Stop playback 0 Turn answering system off *4 Erase currently playing message Stop playback *5 Erase all messages Erase currently playing message *6 Reset to a pre-recorded greeting message M N Repeat message M N Skip message M N (STOP) MERASEN Key *1 Erasing all messages Press
Answering System Using the answering system remotely *1 *2 For English voice guidance only For Spanish voice guidance only 1 Dial your phone number from a touch-tone phone. 2 Turning on the answering system remotely After the greeting message starts, enter your remote access code. 1 3 Follow the voice guidance prompts as necessary or control the unit using remote commands (page 30). Dial your phone number from a touch-tone phone. 2 Let the phone ring 15 times. R A long beep is heard.
Answering System Caller’s recording time You can change the maximum message recording time allowed for each caller. 1 2 MMENUN#305 MbN: Select the desired setting. a MSAVEN a MOFFN Selecting “Greeting only” You can select “Greeting only” which sets the unit to announce a greeting message to callers but not record messages. Select “Greeting only” in step 2 on “Caller’s recording time”, page 31. For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1129_ver031.
Useful Information Example: Voicemail service In addition to your unit’s answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the unit’s answering system.
Useful Information 3 Wall mounting Note: R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. Insert the hooks on the wall mounting adaptor into holes (1) and (2) on the base unit. 1 2 Base unit 1 Lead the AC adaptor cord and telephone line cord through the hole in the wall mounting adaptor in the direction of the arrow. 2 4 2 Tuck the telephone line cord inside the wall mounting adaptor (A). Connect the AC adaptor cord and telephone line cord (B).
Useful Information 5 Mount the unit on a wall then slide down to secure in place. 1 AC adaptor cord R This product is compliant with the following wall phone plate sizes (2 types). 2 83 mm (3 1/4 inches) 3 102 mm (4 inches) Fit the slots of the unit onto the corresponding wall phone plate tabs for (4) and (5) respectively. 1 To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B). A A B Charger Drive the screws (1) (not supplied) into the wall. 2 27.
Useful Information Error messages Display message Cause/solution Ask phone company for VM access # R You have not stored the voicemail access number. Store the number (page 32). Main unit no power or No link. Reconnect base AC adaptor. R Confirm the base unit’s AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base unit’s AC adaptor to reset the unit.
Useful Information Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then insert them into the handset again. General use Problem Cause/solution The handset does not turn on even after installing charged batteries. R Place the handset on the base unit or charger to turn on the handset. The unit does not work.
Useful Information Problem Cause/solution Noise is heard, sound cuts in and out. R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. The handset does not ring.
Useful Information Answering system Problem Cause/solution The unit does not record new messages. R The answering system is turned off. Turn it on (page 28). R The message memory is full. Erase unnecessary messages (page 29). R The recording time is set to “Greeting only”. Change the setting (page 31). R Your phone service provider’s voicemail service may be answering your calls before the unit’s answering system can answer your calls.
Useful Information FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. L Registration No.............(found on the bottom of the unit) L Ringer Equivalence No. (REN).......0.
Useful Information manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules.
Useful Information Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. Compatible with Hearing Aid T-Coil T TIA-1083 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1129_ver031.
Guía Rápida Española Guía Rápida Española Conexiones 1 Conecte el adaptador de corriente alterna a la unidad presionándolo firmemente. 2 Conecte el adaptador de corriente alterna a la toma de corriente. 3 Conecte el cable de la línea telefónica a la unidad, y después a la toma telefónica de una sola línea (RJ11C) hasta que escuche un clic. 4 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio. 2 1 3 4 3 Instalación y carga de la batería Cargue aproximadamente durante 7 horas.
Guía Rápida Española Sugerencias de operación Teclas de función Al oprimir una tecla de función, puede seleccionar la función que aparece directamente encima de ella en la pantalla. Preste atención a la pantalla para ver qué funciones están asignadas a las teclas de función durante la operación. Tecla navegadora - {^}, {V}, {<}, o {>}: Navegue por diversas listas y elementos. - VOL. (Volumen: {^} o {V}): Ajuste el volumen del receptor o el altavoz mientras habla.
Guía Rápida Española Operaciones básicas Cómo hacer y contestar llamadas (Auricular) Para hacer llamadas Marque el número telefónico. s {C}/{s} Para contestar llamadas {C}/{s} Para colgar {OFF} Para ajustar el volumen del receptor o del altavoz Oprima {^} o {V} repetidamente mientras habla. Cómo hacer una llamada usando la lista de remarcación {>} REDIAL s {r}: Seleccione la entrada deseada. s {C} Para ajustar el volumen del timbre del auricular Oprima {^} o {V} repetidamente mientras timbra.
Guía Rápida Española Preguntas frecuentes Pregunta Causa y solución ¿Por qué aparece _? L El auricular está demasiado lejos de la unidad base. Acérquelo. L El adaptador para corriente de la unidad base no está conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base. L El auricular no está registrado en la unidad base. Regístrelo. 1 Auricular: {MENU}(13) 2 Unidad base: Oprima y mantenga oprimido {LOCATOR} durante aproximadamente 5 segundos.
Appendix Customer services Shop Accessories! for all your Panasonic gear Go to hp://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & more… Customer Services Directory For Product Informa!on, Opera!ng Assistance, Parts, Owner’s Manuals, Dealer and Service info go to hp://shop.panasonic.
Appendix Limited Warranty (ONLY FOR U.S.A.
Appendix Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Index I K Index A B C D E F G H Additional handset: 4 Alarm: 24 Answering calls: 13 Answering system Call screening: 30 Erasing messages: 29, 30 Greeting message: 28 Greeting only: 31 Listening to messages: 28, 30 Number of rings: 30 Recording time: 31 Remote access code: 29 Remote operation: 29 Ring count: 30 Toll saver: 30 Turning on/off: 28 Auto talk: 13, 23 Battery: 9 Booster (Clarity booster): 11 Call block: 15 One ring for blocked call: 16 Call share: 14, 23 Call waiting: 14 Call Waiting Caller I
Notes 50 TGD51x_OI(en)_1129_ver031.
Notes 51 TGD51x_OI(en)_1129_ver031.
IMPORTANT! If your product is not working properly. . . 1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions. Visit our Web site: http://shop.panasonic.com/support L FAQ and troubleshooting hints are available.
