Getting To Know Your Machine Digital Imaging Systems DP-8020E / 8020P / 8016P Before operating this machine, please carefully read this manual, and keep this documentation in a safe place for future reference. (Illustration shows optional accessories that may not be installed on your machine.) English Appendix Problem Solving Network Scanner Accessories Function Model No.
Getting To Know Your Machine Useful Office Functions/Operating Instructions Copy Fax/Email • Copy up to Ledger size originals. • Capable of copying text/photos/ halftone originals. • Plain Paper High-speed Super G3 compatible Fax with JBIG compression when optional Fax Communication Board (DA-FG180) is installed. (For DP-8020E/8020P∗ only) • Quick-Scan • Quick Memory Transmission • Email Function capability. Scan/File • Monochrome scanner capability.
Getting To Know Your Machine Operating Instructions Outline Getting To Know Your Machine ● Precautions (See pages 7-13) ● Quick Operation Chart, Adding Paper (See pages 14, 15) ● Problem Solving, Memory Full, Replacing Toner Bottle/Toner Waste Container, Removing Misfed Paper, Error Codes (U Code/J Code) (See pages 15-21) Before Starting ● Control Panel Key/Indicator Names Making Copies ● Operating Instructions for making copies (See pages 24-51) Function Accessories Network Scanner Problem Solvi
Getting To Know Your Machine Symbols/Icons A B C The following Symbols/Icons are used throughout this operating instructions manual. Place original(s) on the ADF/i-ADF Getting to know your machine Before starting Place original on the Platen (Book) When making copies Place original on the Platen (Sheet) Press any Hard Key on the Control Panel When setting the machine modes Press Hard Key Accessories Input numbers ● Number of Copies, etc.
Getting To Know Your Machine Getting To Know Your Machine Table of Contents Getting to Know Your Machine Useful Office Functions/Operating Instructions .......................................................................... 2 Multi-Tasking Job Table .................................................................................................................. 2 Operating Instructions Outline ......................................................................................................
Getting To Know Your Machine Table of Contents Function ■ Using Function Modes to Change the Initial Machine Modes ........................ 52 ■ Procedure ....................................................................................................... 52 ■ General Settings ............................................................................................ 54 ■ General Settings (For Key Operator) ............................................................. 54 ■ Copier Settings ..............
Getting To Know Your Machine Getting To Know Your Machine Safety Information For Your Safety To prevent severe injury and loss of life, read this section carefully before using the Panasonic DP-8020E/8020P/8016P to ensure proper, and safe operation of your machine. ■ This section explains the Warnings and Cautions used in this Operating Instructions manual. WARNING Denotes a potential hazard that could result in serious injury or death.
Getting To Know Your Machine Safety Information Be sure to switch Off, and unplug the machine before accessing the interior of the machine for cleaning, maintenance or fault clearance. Access to a live machine’s interior can cause an electric shock. Once a month, unplug the machine and check the power cord for the following. If you notice any unusual condition, contact your authorized Panasonic dealer. ● The power cord is plugged firmly into the receptacle.
Getting To Know Your Machine CAUTION Installation and Relocation Cautions Do not place the machine near heaters or volatile, flammable, or combustible materials such as curtains that may catch fire. Do not place the machine in a hot, humid, dusty or poorly ventilated environment. Prolonged exposure to these adverse conditions can cause fire or electric shocks. Place the machine on a level and sturdy surface that can withstand a weight of 95 lb (43.3 kg) (DP-8020E) / 93 lb (42.3 kg) (DP-8020P/8016P).
Getting To Know Your Machine Safety Information For Your Safety CAUTION Consumable Safeguards Be sure to use the specified type of batteries only. Ensure that batteries are installed with correct polarity. Incorrectly installed batteries can burst or leak, resulting in spillage or injuries. Others ■ The machine has a built-in circuit for protection against lightning-induced surge current.
Getting To Know Your Machine Precautions Precautions ■ Laser Safety LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Getting To Know Your Machine Precautions Installation ■ The maximum power consumption is 1.3 kW. A properly wired (grounded), dedicated, 12 A, 120 V AC outlet is required. Do not use an extension cord. The power cord on this machine must be used to disconnect the main power. Please ensure that the machine is installed near a wall outlet and is easily accessible. Supplies ■ Store the Toner and paper in cool areas with low humidity.
Getting To Know Your Machine Handling ■ Do not turn the Power Switch Off, or open the Front Cover during copying/printing. ■ Sleep/Shutdown Mode Notice ● The following functions will not work if the Sleep/Off Mode setting is set to the Shutdown mode. When using any of the following functions, we recommend that you leave the Sleep/Off Mode in the initial factory default setting (Sleep mode). - Turn OFF the Power Switch on the Right Side of the machine.
Getting To Know Your Machine Operation Chart ■ Quick Operation Chart 1 2 Face Up A B C From ADF/i-ADF (Option) Original Guides∗ Tray or If set to other function mode (DP-8020E/8020P only) Adjust to the (Max. 50 Letter original's width size originals) ∗ Hold the guides by the center when adjusting the width Original Guides From Platen LGL LGL LDR Face Down LDR LTR LTR-R INV-R INV INV ● If the original is not positioned properly, a portion of the original may not be copied.
Getting To Know Your Machine 3 4 Reduction/ Enlargement only From Platen only LTR ->LTR [LTR ] ZOOM:100% COPIES:001 5 LTR ->INV [INV ] ZOOM: 65% COPIES:001 Number of Copies (Max.
Getting To Know Your Machine Operation Chart ■ Problem Solving ● Replacing Toner Bottle/Toner Waste Container 1 ATTENTION ● For optimum copy quality use the recommended Panasonic Toner. Store Toner Bottle in a cool dark place. Do not unseal the Toner Bottle unless you are ready to use it. Front Cover 2 Toner Waste Container 6 Corona Cleaner 7 NOTE: Do not reuse the toner from the Toner Waste Container.
Getting To Know Your Machine 3 Cap 4 5 Corona Cleaner Handle 6 Toner Waste Container Toner Bottle (Empty) To Release 8 9 Toner Bottle (New) Toner Waste Container (New) Toner Bottle (New) To Lock 3 Misfed Paper 10 Close the Front Cover.
Getting To Know Your Machine Operation Chart ■ Problem Solving ● Removing Misfed Paper (ADF: Option for DP-8020E/8020P/8016P) (J70, J71, J79, J92, J93) 1 2 (Ex.) REMOVE MISFED PAPER J70 Misfed Paper ADF Cover ● Removing Misfed Paper (i-ADF: Option for DP-8020E) (J70, J71, J72, J73, J76, J78, J79, J92, J93) 1 2 (Ex.
Getting To Know Your Machine 3 4 ADF Misfed Paper ADF Cover 3 5 4 Misfed Paper 6 Exit Unit ADF Tray 8 Misfed Paper 9 10 2 1 ADF Cover 3 4 Misfed Paper 5 6 Paper Tray Lift Upward and Pull Out Misfed Paper 19
Getting To Know Your Machine Operation Chart ■ Problem Solving ● Removing Misfed Paper (J19, J32, J82, J85, J87: ADU for DP-8020E only) 1 EX. REMOVE MISFED PAPER J82 2 Left Cover Misfed Paper ● User Error Codes (U Code) U20 U21 U90 U01 U13 U14 U15 U16 U25 U07 Code U01 U07 U13 U14 U15 U16 20 Check Points Front and/or Left Cover is open. Feed Cover is open. (See page 18) Low Toner, or Out of Toner. Toner Waste Container is full. Toner Waste Container is incorrectly installed.
Getting To Know Your Machine 3 Misfed Paper 4 5 Misfed Paper Jam Removal Knob Left Cover Note: • Do not pull Misfed Paper from the front, it may cause damage. ● Jam Error Codes (J Code) Code J00 J01 J02, J03, J04 J07, J08, J09, J12, J13, J14, J22, J23, J24 Check Points Remove paper from the Sheet Bypass. Open, and close the Left Cover (as illustrated in Steps 1 and 5 above).
Before Starting Control Panel 1 2 3 4 5 16 15 14 6 7 8 9 Icon 1 3 29 Contents INTERRUPT Key Interrupts other copy job while making copies. (See page 48) ERASE Key Selects Edge, Book or Margin mode. (See page 39) No. Icon 2 6 8 Energy Saver Key Saves power while the machine is not in use. (See page 48) ORIGINAL SIZE Key To select an original size. 9 11 10 12 DUPLEX Key Selects a 2-Sided or 1-Sided copy. (See pages 27-31) 2-Sided Copy: DP-8020E only N in 1 Key Selects N in 1 copy mode.
19 20 21 22 Before Starting 18 ∗ Used for Fax, Internet Fax, and Email Functions. (except for the ABBR Key, see page 50.) 23 27 26 No. 17 19 20 Icon 25 24 Contents PAPER TRAY Key Selects the paper tray. No. 18 Cursor Key To select the zoom ratio, etc. Keypad Sets copy quantities, etc. Icon Contents Warning Indications When unit is used as a photocopier.
Making Copies Basic Copy ■ Copying the Same Size Originals (1:1) Copy size is automatically selected. 1 2 For ADF For i-ADF From Platen only LDR : Ledger 100% or LGL : Legal LTR : Letter LTR : Letter-R INV : Invoice INV : Invoice-R ■ Position of the Original(s) For Platen (Face Down) Original Guides INV LGL LGL LDR LDR LTR LTR-R INV INV INV-R For ADF/i-ADF∗ (Face Up) INV ∗ ADF for DP-8020E/8020P/ INV LTR LGL LTR LDR ● When copying a thick Booklet, do not close the ADF/i-ADF.
3 Select type of Original(s) PHOTO : Mainly Photo TEXT/PHOTO: Text and Photo combined TEXT : Mainly Text Making Copies 4 Number of Copies (Max.
Making Copies Creative Features ■1 2 Copy, 2 2 Copy, 2 1 Copy (DP-8020E with optional i-ADF) 1 For i-ADF 2 1 2 Copy 1-Sided 2-Sided Copy 2 2 Copy 2-Sided 2-Sided Copy or (1 2 1 Copy 2-Sided From Platen only for 1 2 Copy 2 Copy only) 1-Sided Copy Steps 6 to 9 for 1 : Ledger LGL : Legal LTR : Letter LTR : Letter-R INV : Invoice INV : Invoice-R 2 Copy from Platen: 6 7 ANOTHER ORIGINAL? 1:YES 2:NO 1: YES Go to next step.
5 4 6 1-Sided Original to 2-Sided Copy 2-Sided Original to 2-Sided Copy 2-Sided Original to 1-Sided Copy 8 9 From Platen only. Bind Position (Select within 10 sec.) 2 Copy, 2 1 Copy) (For 1 Long Edge ~ Number of Copies (Max. 999) Short Edge 9 10 The following steps, illustrate how to make multiple copies when the Sort Mode is selected. (See page 42) ANOTHER ORIGINAL? 1:YES 2:NO 1: YES 2: NO Continues to copy another original, repeat steps 1 and 5- 2 to step 8. Starts making copies.
Making Copies Creative Features 2 Copy (DP-8020E with optional ADF) 1 Copy (DP-8020E/8020P∗/8016P with optional ADF) Copying 2 2 or 2 ADF (not i-ADF) 2 2 Copy 1 Copy with optional 2-Sided 1 2 For ADF only A B C ■2 2 2-Sided Copy 5 Odd Number Pages Long Edge Short Edge Originals Originals 1-Sided Copy NOTE: If the memory overflows while scanning originals, all scanned data will be cancelled. If this occurs, restart from Step 1.
4 3 Making Copies 5 Bind Position (Select within 10 sec.) 1 Copy only) (For 2 Long Edge Number of Copies (Max. 999) Short Edge 6 PRESS START TO CONTINUE 7 8 SET ORIGINALS ON ADF NOTE: If the page count for the Back side does not match the page count for the Front side (i.e. page double-fed) of the 2Sided originals, a "TOTAL PAGE MISMATCH" will be displayed and all scanned data will be cancelled. If this occurs, restart from Step 1 and Step 4- 2 to Step 6. Exits this mode.
Making Copies Creative Features ■ Book Book 2 Copy (DP-8020E only) For Book Format is Flipping: 2-Sided Copy The book format and page order can be set in the Copier Settings, Parameter No. 2 DEFAULT). (See page 58) 14 (BOOK 2 1 Original Size: Ledger, Letter-R (Book Format: Flipping) (Page Order: L Select Ledger or Letter-R size∗ R) 5 The following steps, illustrate how to make multiple copies when the Sort Mode is selected.
4 3 For Sort Mode only Select Book Original to 2-Sided Copy∗ Number of Copies (Max. 999) 6 Exits this mode. 3 NOTE: ∗ The copy size will be automatically selected. If the selected paper size is not set into the paper tray(s), set paper on the Sheet Bypass (see page 14) or select another copy size with COPY SIZE Key (See page 25).
Making Copies Creative Features ■ N in 1 From two/four 1-Sided originals, side by side, to 1-Sided pages. 1 2 For ADF ● 2 in 1 Copy For i-ADF From Platen only ● 4 in 1 Copy 1 or 1 2 3 4 LDR : Ledger LGL : Legal LTR : Letter LTR : Letter-R INV : Invoice INV : Invoice-R 2 3 4 NOTE: If the original's Orientation is incorrect when N in 1 copy mode is used, the copy sequence may not reproduce properly.
3 For Preset Ratios 4 For Variable Zoom Ratios LDR : Ledger LGL : Legal LTR : Letter LTR : Letter-R INV : Invoice-R Making Copies 5 Up to 200% in 1% Down to 50% in 1% 6 7 Step 7 to 11 for Platen only ANOTHER ORIGINAL? 1:YES 2:NO 1: YES Go to next step. Number of Copies (Max. 999) NOTE: If “2: NO” is selected, the machine will start copying one side of the scanned original. 12 11 For 4 in 1 Copy ANOTHER ORIGINAL? 1:YES 2:NO ANOTHER ORIGINAL? 1:YES 2:NO Select “1: YES”.
Making Copies Creative Features ■ 2 Page Copy Copying two facing pages or a Ledger size original on two separate Letter size sheets. 1 2 Platen Example: Ledger size original Ledger Page Order: L→R Starts copying from the Left page Letter Ledger Page Order: R→L Starts copying from the Right page NOTE: The page order can be set in the Copier Settings, Parameter No. 16 (2 PAGE MODE DEF.
3 4 5 6 Ledger or Letter size only∗1 Original Size Ledger Letter Making Copies Select a Copy Size∗2 Copy Size Letter Letter-R Invoice Number of Copies (Max. 999) 7 NOTE: ∗1 If the selected original size is not corrected, the book original image will not be copied correctly. ∗2 A copy size will be automatically selected. Exits this mode.
Making Copies Creative Features ■ Double Exposure From 2-Sided originals to 1-Sided copies (side-by-side image). Original Size: Letter or Invoice 1 Copy Size: Letter-R ex. Invoice NOTE: When copying portrait original, set the Portrait in the Copier settings, "1:ORIENTATION of Parameter No. 05 N in 1 DEF." (See page 57) A B C A B C Front Side Image ex.
2 4 3 5 Making Copies Select Invoice or Letter Number of Copies (Max. 999) 6 7 8 The following steps, illustrate how to make multiple copies when the Sort Mode is selected. (See page 42) Back Side of Original 9 ANOTHER ORIGINAL? 1:YES 2:NO 1: YES 2: NO Continues to copy another original, repeat steps 1 and 4- 2 to step 7. Starts making copies.
Making Copies Creative Features ■ Erase (Margin/Edge) Margin Shifts image to left, right, top or bottom.∗ 1 2 For ADF For i-ADF From Platen only Edge Creates a blank edge.∗ NOTE: ∗ Shift position of Margin and blank edge value can be changed with Copier Setting Mode.
4 3 5 ERASE MODE (1-3) ENTER NO. OR ∨ ^ 1:MARGIN? PRESS SET TO SELECT or This Key will flash. or 6 Making Copies 2:EDGE? PRESS SET TO SELECT : MARGIN : EDGE 8 7 Exits this mode. Number of Copies (Max. 999) 3 4 5 ERASE MODE (1-3) ENTER NO. OR ∨ ^ 3:BOOK? PRESS SET TO SELECT 6 or 7 : Book 8 Exits this mode. Number of Copies (Max.
Making Copies Creative Features ■ Effects (Centering/Image Repeat) 1 Centering 2 Copy image can be centred automatically on selected paper. Open the ADF or Platen Cover Image Repeat Creates continuous copy image on one sheet. Minimum original size: 20 x 20 mm. The dotted line can be set to “None” or “Print” by the Copier Settings, Parameter No. 15 (IMAG. REPEAT DOT.) (See page 58).
3 4 EFFECTS (1-2) ENTER NO. OR ∨ ^ 5 1:CENTERING? PRESS SET TO SELECT PAPER TRAY TRAY-1 ∨ ^ or or Making Copies 6 2:IMAGE REPEAT? PRESS SET TO SELECT : Centering : Image Repeat TRAY-1 TRAY-2 TRAY-3 TRAY-4 BYPASS NOTE: Tray-2, 3 and 4 are options. (See page 69) 7 Exits this mode.
Making Copies Creative Features ■ Sort 1 Sort Multiple copy sets are sorted automatically. 1 2 1 3 2 1 3 2 2 For ADF For i-ADF 3 Lights Sort mode is selected. Rotate-Sort Multiple copy sets are sorted automatically and are stored on the Output Tray in alternate direction (rotate). Initial Sort-Rotate Mode is “1:OFF”, this setting can be selected within the Copier's General Settings.
4 3 5 LGL : Legal LTR : Letter LTR : Letter-R INV : Invoice INV : Invoice-R 7 PRESS START TO CONTINUE Making Copies : Ledger 8 From Platen only From Platen only LDR ~ Number of Copies (Max. 999) 8 ANOTHER ORIGINAL? 1:YES 2:NO : YES Continues to copy another original, repeat steps 1 and 4- 2 to step 7. : NO Starts making copies.
Making Copies Other Features ■ Skyshot Mode Skyshot allows copying a manuscript without generating dark borders even if the Platen Cover or ADF is opened. Two types of Skyshot modes can be selected; Digital Skyshot Mode : The scanning area (size) is not pre-determined. Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) in advance. ■ Digital Skyshot Mode The default setting of Digital Skyshot Mode is “NORMAL”. This default setting can be changed in the Copier Settings.
Making Copies 2 3 LDR : Ledger LGL : Legal LTR : Letter LTR : Letter-R INV : Invoice INV : Invoice-R 2 Number of Copies (Max. 999) NOTE ● An incorrect position detection of the original may occur when a strong light shines onto the glass during digital skyshot mode. ● An incorrect exposure may occur when there is a black line at the edge of the original or an image which the machine interprets as a black pattern in the digital skyshot mode.
Making Copies Other Features ■ Job Build and SADF Mode Special originals (like thin paper, etc.) can be fed from the ADF Tray and copied continuously using the Job Build and SADF Mode. 1 NOTE: Set the Copier Settings, Parameter No. 12 (SADF DEFAULT) to “OFF” position in advance. (See page 59) Thin paper: minimum 15 lb (55 g/m2) Example: To make 5 sets of sorted copies of 80 sheets of originals.
3 4 For ADF Starts the printing process. Making Copies For i-ADF Place the next original within 5 sec. of last ejected original. Number of Copies (Max. 999) 3 5 4 For ADF Place the next original within 5 sec. of last ejected original. (30 sheets) For i-ADF Select the Sort mode Lights Sort mode is selected. Number of Copies (Max. 999) (ex. 5) 3 4 When starting the printing process: Set the next copy job, repeat steps 1 to 3. Next original(s) will be scanned. Starts the printing process. (ex.
Making Copies Other Features ■ Interrupt Mode This mode interrupts the current running copy job and allows other copy jobs to be processed. 1 2 Other Job For ADF or For i-ADF (See pages 24-43) ■ Energy Saver (Power Saver Mode, Sleep/Shutdown Mode) These modes save power while the machine is not in use. Power Saver Mode To enter To exit Automatically enters the Power Saver or Mode after 10 minutes from the last job.
3 4 5 6 Making Copies Other Job is completed Power Consumption Warm Up Time Unavailable Functions Standby Modes Approx. 120 W — ———————— Power Saver Approx. 19.5 W Approx. 30 sec. ———————— Sleep Approx. 8.5 W Approx. 30 sec. ———————— Shutdown Approx. 1.6 W Approx. 30 sec.
Making Copies Other Features ■ Completion Notice If Completion Notice is set, you will be notified on your computer when copying is completed. Before using this function, install the Panasonic Document Management System (Communications Utility), and the Printer Driver (with Job Status Utility) on your computer, and then configure each software referring to Setting up the Scanner Configuration using the Communications Utility, and Setting up the Completion Notice.
2 3 For ADF and or Making Copies 4-1 For i-ADF Press COPY key and FUNCTION key simultaneously COMPLETION NOTICE SELECT DESTINATION 4-2 5 6 ABBR No. (2-digit) [01]SALES 10.74.252.66 4-2 Number of Copies (Max. 999) Copy Job Completed Notice will be displayed on your PC. Enter letter(s) (See page 70) ENTER LETTER(S) SA_ 3 [06]SALES_3 [05]SALES_2 10.74.252.66 [01]SALES 10.74.252.66 10.74.252.
Function ■ Using Function Modes to Change the Initial Machine Modes Option General Settings Copier Settings Scanner∗ Settings Printer Settings Fax/Email∗ Settings ∗ DP-8020E/8020P only Input Key Operator Password (See page 13) General Settings for Key Operator Copier Settings for Key Operator General Settings: Printer Settings for Key Operator Changing the Initial Machine Modes ● Power On Default Mode, Key Operator Mode, etc.
Copier Settings: Changing the Initial Copier Modes ● Default function of each copy mode. (See pages 57 and 58) For Key Operator: Original mode, Contrast, etc. (See pages 58 and 59) Printer Settings: Changing the Initial Printer Modes Scanner Settings: Function ● Default function of each print mode. (See page 59) For Key Operator: Job completion time, Page protection, Error page print, Spool function, PS configuration, Font list print, Mailbox data handling, etc.
Function ■ General Settings No. Modes Function Initial Setting 00 POWER ON DEFAULT Selects the default operation mode. 1:COPY / 2:FAX / 3:PRINTER / 4:SCANNER (Fax is option, see page 69) 1: COPY 01 SORT MEMORY USAGE Selects whether to display the amount of sort memory used on the control panel. 1:OFF / 2:DISPLAY 1: OFF 02 DEPT. COUNTER Displays the Total Copy usage and copy limit of Consult your authorized the selected department.
■ General Settings (For Key Operator) (Continued) Modes Initial Setting Function 08 SPECIAL TRAY 2 Selects the paper tray to use for special paper. 1:NONE / 2:TRAY-1 / 3:TRAY-2 / 4:TRAY-3 / 5:TRAY-4 / 6:BYPASS (Only available when optional TRAY-2 and 3/4 are installed. see page 69) 1:NONE 09 KEY/TOUCH BEEP Selects the default key sound level. 1:OFF / 2:SOFT / 3:LOUD 2:SOFT 10 BYPASS SET BEEP Selects whether to sound a Beep when paper is 1:INVALID set on the Sheet Bypass.
Function ■ General Settings (For Key Operator) (Continued) No. Initial Setting Function 23 DNS SERVER ADDR.∗2 Selects whether to enable the DNS Server, and 2:VALID sets its settings for Internet Fax/Email Function. 1:INVALID 2:VALID 1:HOST NAME / 2:DOMAIN NAME / 3:PRI. DNS SERVER (IP ADDRESS1) / 4:SEC. DNS SERVER (IP ADDRESS2) 24 MAC ADDRESS Indicates the MAC address. 25 HARD DISK FORMAT∗ 26 HARD DISK ERR CHK∗4 Selects the provision for the hard disk error check.
■ Copier Settings No. Modes Initial Setting Function MARGIN DEFAULT Selects the margin shift value. 1:LEFT 1:POSITION / 2:VALUE 10 mm 1:LEFT / 2:RIGHT / 3:TOP / 4:BOTTOM Procedure: Select "1:POSITION" and select a Margin position then, select "2:VALUE" and input a shift value with Keypad. 01 EDGE DEFAULT Selects the edge width. 1:EQUAL RATE (X & Y) / 2:INDIVIDUAL Procedure: Select "1:EQUAL RATE (X & Y) " or "2:INDIVIDUAL" then, input a edge value with Keypad.
Function ■ Copier Settings (Continued) No. Modes Initial Setting Function 11 SORT PRIOR. GLASS Selects the sort priority when using the Platen. 1:NON-SORT / 2:SORT 1:NON-SORT 12 1→2 BINDING DEF. Selects the binding location for 1→2 Copy. 1:LONG EDGE / 2:SHORT EDGE 1:LONG EDGE 13 2→1 BINDING DEF. Selects the binding location for 2→1 Copy. 1:LONG EDGE / 2:SHORT EDGE 1:LONG EDGE 14 BOOK → 2 DEFAULT Selects the page layout of the Book→2 copy.
No. Modes Initial Setting Function 10 TONER SAVE (T/P) Selects the Toner Save Level to use for the Text/Photo mode. 1:NONE / 2:LEVEL1 / 3:LEVEL2 1:NONE 11 TONER SAVE (PHOTO) Selects the Toner Save Level to use for the Photo mode. 1:NONE / 2:LEVEL1 / 3:LEVEL2 1:NONE 12 SADF DEFAULT Selects whether the Job Build and SADF Mode is enabled. 1:OFF / 2:ON 1:OFF ■ Printer Settings Modes Initial Setting Function 00 NUMBER OF PRINTS Sets the default number of prints.
Function The following Parameter Settings require the input of the Key Operator Password: ■ Printer Settings (For Key Operator) No. Modes Initial Setting Function 00 PRINTER SETTINGS Prints the printer settings. PRESS SET TO PRINT 01 COMPLETION TIME Sets the job completion time setting. 1-999SEC 02 PAGE PROTECTION Selects whether to enable automatic 1:OFF compression when the received data exceeds the page memory capacity.
■ Scanner Settings (Scan Parameters) Modes Function Initial Setting 00 SCANNER SETTINGS Prints the scanner settings. PRESS SET TO PRINT 01 ORIGINAL MODE Selects the default Halftone setting for the originals. 2:TEXT/PHOTO 1:TEXT / 2:TEXT/PHOTO / 3:PHOTO 02 COMPRESSION MODE Selects the default compression mode setting. 1:MH / 2:MR / 3:MMR / 4:JBIG 4:JBIG 03 RESOLUTION Sets the default resolution setting.
Function For Example ■ Changing the Paper Size (Paper Tray) The Paper Trays are designed to accommodate Invoice, Letter, and Legal Size paper. 1 2 3 FUNCTION MODE (1-2) ENTER NO. OR ∨ ^ 1:GENERAL SETTINGS PRESS SET TO SELECT or 1: General Settings 6 7 KEY OPR.MODE (00-34) ENTER NO. OR ∨ ^ 8 Select a Paper Tray 01 PAPER SIZE 1:TRAY-1[LETTER ] or 1:TRAY-1 2:TRAY-2 3:TRAY-3 4:TRAY-4 01 PAPER SIZE NOTE: TRAY-2, 3, 4 are options (See page 69) 12 13 14 Paper Tray Paper Guide B ex.
4 5 09 KEY OPERATOR MODE ENTER PASSWORD= GENERAL PARAM. (0-9) ENTER NO.
Function For Example ■ Department Counter The Department Counter feature can limit the number of copies, administer counters and Identification Code numbers for each department. (Maximum Number of Departments: 300) Contact your authorized Panasonic dealer to enable the Department Counter feature. 1 2 3 FUNCTION MODE (1-2) ENTER NO. OR ∨ ^ or 1: General Settings 6 7 KEY OPR. MODE(00-34) ENTER NO. OR ∨ ^ 13 DEPT. COUNTER MODE 1: TOTAL COUNTER or 13 (DEPT. COUNTER MODE) 11 10 DEPT.
4 5 GENERAL PARAM. (0-9) ENTER NO. OR ∨ ^ 09 KEY OPERATOR MODE ENTER PASSWORD= 6 or 3-digit (See page 13) 9 (09 "KEY OPERATOR MODE") DEPT. CODE (1-300) ENTER NO. OR ∨ ^ For Department Counter DEPT. COUNTER 001 123145 For ID (Identification) Code ID CODE 001 12345678 10 Department No (01-300) ID Code (1 to 8-digit) Clear the counter to "0".
Function For Example ■ Network Settings When the Parameter No. 22 (DHCP DEFAULT) is set to “INVALID”, the Key Operator must administer the Network settings manually. Enter these required Network Setting: Parameter No. 19 (TCP/IP ADDRESS), 20 (TCP/IP SUBNET MSK) and 21 (TCP/IP G/W ADDR.), in the same manner as shown in the following example. 1 2 Same procedure as steps 2 to 5 above. 6 19 TCP/IP ADDRESS 19 TCP/IP ADDRESS 192.168.1.100 Input the TCP/IP Address Ex.: 192.168.1.
4 3 KEY OPR. MODE (00-34) ENTER NO. OR ∨ ^ 5 Select 19 (TCP/IP ADDRESS) 22 DHCP DEFAULT 2:VALID :INVALID 6 or (4 times) 22 (DHCP DEFAULT) 8 20 TCP/IP SUBNET MSK 21 TCP/IP G/W ADDR. Input the Subnet Mask same procedure as in step 6. Input the Gateway Address same procedure as in step 6.
Function Combined Function Table 1 2 2 1∗ 2 2∗ Book 2 2 Page N in 1 Sort/Rotate-Sort Non-Sort Zoom Edge Book Margin Image Repeat Centering Interrupt Manual Skyshot Digital Skyshot Double Exposure : Possible Combined Functions. : Unavailable Combined Functions. A : Next Selection is Carried Out. R : When the same function is selected twice, the second selection is ignored. : Functional combination that cannot be performed.
Accessories Components ■ The DP-8020E/8020P/8016P is a digital photocopier which can produce images with great clarity. Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and supplies. We hope you find that the wide ranging capabilities will make your office-place more productive and efficient. ■ Options Image Memory (DA-SM16B/64B/28B) ● 16/64/128 MB ● To increase the memory capacity for electronic sorting.
Network Scanner Document Scanning ■ Document Scanning When Panasonic Document Management System is installed and configured on your PC, document(s) can be scanned from the machine to your PC. Direct Connection (with Crossover Cable, see page 76) ● Document Scanning directly from the Machine to your PC using Windows “My Network Places” or “Network Neighborhood”. NOTE: USB Port is used for printing only, and is not available for local scanning.
Select a Station (PC's Address) ABBR 3-3 3-2 3-1 4 ABBR No. (2-digit) ABBR [_ ] ENTER ABBR No. DIRECTORY SEARCH [01]SALES 10.74.252.66 3-3 3-2 3-1 4 Enter letter(s) ENTER LETTER(S) _ ENTER LETTER(S) SA_ 3 3 3-2 3-1 NOTE "ONE-TOUCH" is available when the optional Keyboard (DAKB180) is installed. 4 Keyboard (Option) <10>PANA 10.74.252.63 5 6 PRESS START LTR 7 8 ANOTHER ORIGINAL? 1:YES 2:NO 1:YES Continues to scan another original(s), repeat steps 5 and 6. 2:NO No next original.
Network Scanner Address Book ■ Adding your PC's IP Address If the Scanner Configuration is not set with the Communications Utility of Panasonic Document Management System software, setup the Communications Utility software by following the steps below. 1 2 2 1 1 Right-Click "Panasonic Communications Utility" icon on the Task Bar, and then select "Scanner Configuration...". 2 Refer to right column. You can change the Name, and Key Name in this window.
3 Click "Add Device" if your PC address information is registered on the machines located on a different subnet. Click "OK". 1 Click "Add". 4 Click "OK". 1 4 2 Enter the 3 machine’s Device Name, and IP Address. Network Scanner 2 3 Click "OK".
Network Scanner Function ■ Scan Parameters (Scanner Settings) 1 2 3 SEP-02-2006 04:28 READY TO SCAN FUNCTION (1-2) ENTER NO. OR ∨ ^ or 1: SET MODE Refer to Function settings on page 61. ● Prints Scanner Settings List, Sets Original Mode, Sets Compression Mode, Sets Resolution, Sets Bind Position, Sets File Type/Name 7 SCAN PARAM (0-6) ENTER NO. OR ∨ ^ or ■ Select Mode When adding a file name or selecting a compression format before scanning document(s). 1 2 3 FUNCTION (1-2) ENTER NO.
4 1:SET MODE ? PRESS SET TO SELECT 6 5 SET MODE (1-2) ENTER NO. OR ∨ ^ 2:SCAN PARAMETERS ? PRESS SET TO SELECT 7 or 4 2:SELECT MODE? PRESS SET TO SELECT 5 SELECT MODE (1-2) ENTER NO.
Network Scanner Direct Connection (with Crossover Cable) ■ Direct Connection (with Crossover Cable) 1 2 Connect a Crossover LAN Cable between your machine and the PC. Turn OFF∗ the Power Switch (Machine and the PC). LAN Cable (Crossover) To PC LAN Cable (Crossover) To Machine (Right Side of Machine) (Rear Side of PC) NOTE: Do not use Standard LAN Cable. 5 Turn OFF∗ and ON the Power Switch (Machine and the PC).
3 4 Turn On the Power Switch (Machine and the PC). Input the Network Address (Machine and your PC). ● IP and Gateway Address∗ IP: 192.168.0.1 (Machine) 192.168.0.2 (Your PC) Subnet Mask: 255.255.255.0 (Machine & the PC) ● How to input the network address: For your Machine: See page 66 For your PC: See below 5 NOTE: ∗ If you use the DHCP server, select to disable the DHCP server. Machine: See page 55 Your PC: Consult your System Administrator.
Problem Solving Troubleshooting Check Action Unit Does Not Operate Does the display light? Check if the Power Switch (Main Power Switch on the Right Side of the machine) is turned ON and if the power cord is plugged into the AC outlet. Does the Energy Saver key flash (or light) and the display is turned OFF? (See page 48) Press Energy Saver key on the control panel. Does any of the U## codes and messages appear on the display? (U01, U07, U13, U14....etc.
Check Action Marked Copies Is the machine’s Platen Glass or Platen Sheet dirty? Clean the Platen Glass or Sheet. Is the original an OHP film or a dark original? Cover the original with a sheet of white paper before copying or lighten the exposure setting. If a dark verical line of 0.8-1.2 inch (2-3 cm) in width is printed. Clean the Corona Wire of the Drum Unit. (See page 16) Check the copies.
Problem Solving Replacing the Battery/Set the Date and Time The machine has an internal battery (Product No.: CR2032) which maintains the date and time. In the event the battery requires replacement, the following message will be displayed. REPLACE BATTERY U90 1 2 Battery Holder Turn the Power Switch on the Right Side of the machine to the OFF position. If the Hard Disk Drive Unit (DA-HD18) is installed, see page 13. Remove 1 Screw. Remove the Battery Holder.
3 4 5 Turn the Power Switch on the Right Side of the machine to the ON position. Battery Holder New 6 Used “+” side of battery should be facing upwards. (Observe the polarity, see CAUTION! below) 7 Reinstall the Battery Holder. Install 1 Screw. 8 FUNCTION MODE (1-2) ENTER NO. OR ∨ ^ 9 GENERAL PARAM.(0-9) ENTER NO.
Appendix Specifications ■ DP-8020E/8020P/8016P (For Copier) Type Desk Top Platen Type Fixed Acceptable Originals Sheets, Books (max. Ledger size) Copying Method Laser Indirect Electro Static Fusing Method Heat Roller, and Pressure Roller Imaging Method Dry-Type Dual Components Imaging Resolution Max. 600 dpi Operation Panel LCD Display Copy Size Ledger - Invoice via Paper Tray and Bypass Void Area Max. 0.2″ (5 mm) Warm Up Time Approx.
■ Network Scanner (DP-8020E/8020P∗ Only) Scanning Type Scanning Speed (w/o Transmission Time) Resolution (dpi/Monochrome) Max Scanning Area (Platen) Max Scanning Area (ADF) Duplex Scan Scanning Mode Scale Compression Format File Format Send to Station (PC) CCD Image Sensor (ADF/Platen) 19 sheets/minute (Letter) Send to Station (FTP) Yes (Single Address only) Send to Station (Printer) N/A Pop up Notification Yes Protocol LPR, TCP/IP Applicable OS Windows 98 / Me / NT 4.
Appendix Options and Supplies ■ Options Part Name Part No.
memo
IMPORTANT INFORMATION When requesting information, supplies or service always refer to the model and serial number of your machine. The model and serial number plate (Main Name Plate) is located on the rear side of machine. For your convenience, space is provided below to record information you may need in the future. Model No. Serial No.
The following trademarks and registered trademarks are used throughout this manual: Microsoft, Windows, Windows NT, Windows Server, Outlook & Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the USA and other countries. Adobe, Acrobat Reader & Adobe logo are either registered trademarks or trademarks of Adobe Systems Incorporated. All other trademarks identified herein are the property of their respective owners.
USA Only WARRANTY PANASONIC DIGITAL DOCUMENT COMPANY MAKES NO WARRANTIES, GUARANTEES OR REPRESENTATIONS, EXPRESSED OR IMPLIED, TO CUSTOMER WITH RESPECT TO THIS PANASONIC MACHINE, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.