User's Manual Part 1

83
Voice/Videophone Calls/PushTalk
1
When a PushTalk call comes in,
“PushTalk call” is displayed, the ring
tone sounds, and the Call/Charging
indicator flickers.
“PushTalk group call” is displayed for an incoming
group call.
To reject a call, press i( ) during ringing and
select “Call rejection”. You can reject the call also by
pressing h.
2
Press p to answer a PushTalk call
Talk while pressing p.
You can answer also by pressing d or Oo()
instead of p. You can answer also by pressing p with
the FOMA terminal closed.
When you get talker’s right, the talker’s right obtained
tone is played back. The other party hears your voice
only while you are pressing p and having the talker’s
right. When you release p, the talker’s right is released
and a confirmation tone sounds.
You cannot get the talker’s right and an error tone
sounds, even if you press p when another member
has it.
“Setting when opened” and “Record message setting” become invalid.
For a member who uses a PushTalk compatible model which does not have this
function, the members added during PushTalk communication are not shown and a
confirmation tone does not sound.
Receiving a PushTalk Call
Information
3
Press h to end the communication after talking.
A tone for confirming the end of communication sounds at the other end.
When the call you received is a group call, the PushTalk communication itself
continues even if you press h, and the icon indicating that you are not
participating appears on each member’s display and a confirmation tone sounds.
However, when all the members exit, the PushTalk communication itself ends.
Information
The talker is charged a communication fee from when he/she presses .p and the
talker’s right obtained tone sounds.
The duration you can talk per talker’s right is limited. The talker’s right release notice
tone sounds before the limited time arrives, and the talker’s right is released. In
addition, the PushTalk communication itself ends when no one gets the talker’s right
in a certain period of time.
Just after purchase, Hands-free is automatically activated by “Hands-free w/
PushTalk”. (See page 87) However, Hands-free is deactivated during Manner Mode
regardless of “Hands-free w/ PushTalk”.
The FOMA terminal works according to “Setting when closed” if you close it during
communication. You can set also by pressing +i( ) and selecting “Set. when
closed”. (See page 67)
You cannot use “On hold” or “Holding” function for PushTalk.
A PushTalk call that comes in during a voice call, a PushTalk call that comes in during
Public Mode (Drive Mode), and a voice call (when “PushTalk arrival act” is set to other
than “Answer”), a videophone call, data communication, or a PushTalk call that
comes in during PushTalk communication are recorded as missed calls in Received
Calls.
A PushTalk call that comes in during a videophone call or during data communication
does not work and is not recorded in Received Calls.
After you finish PushTalk communication or when you cannot answer to a PushTalk
call, you can use a received call record to make a PushTalk call and to re-participate
or participate midway in the communication so long as the PushTalk communication
continues among other members. If the PushTalk communication among other
members has already been finished, your call is dialed as a new PushTalk call.
When a caller adds members during PushTalk communication, the added members
are not stored in Received Calls.
See page 87 for how to respond to the PushTalk call during i-mode communication.
When the caller is defined as the one to be rejected, the call is rejected. The setting of
call rejection applies to the setting for both voice calls and videophone calls.