User's Manual Part 1

60
Voice/Videophone Calls
When you switch to Hands-free, sound such as the
other party’s voice is audible over the speaker.
1
During a call d
When Hands-free is activated, “ ” is displayed.
p You can activate/deactivate Hands-free during a call.
For videophone calls and PushTalk calls, you can
activate/deactivate also during dialing or connecting.
p Press d again to deactivate Hands-free.
p The sound volume during a Hands-free call follows the
setting specified by “Volume” (earpiece volume).
p You can switch to Hands-free even during Manner
Mode. Also, you will still hear voice through the speaker
even when you activate Manner Mode during a
Hands-free call.
You can make or receive voice calls from a Hands-free
compatible device such as In-Car Hands-Free Kit 01
(option) or a car navigation system by connecting with
your FOMA phone.
You can connect your FOMA phone to a Hands-free
compatible device using two ways of connections as
follows:
p Connect using a cable (USB connection):
To use/charge via the In-Car Hands-Free Kit 01 (option), you
need to have the FOMA In-Car Hands-Free Cable 01
(option).
p Connect using Bluetooth (wireless):
To connect to a Bluetooth compatible Hands-free device, you
need to register and connect it to the FOMA phone.
※ For how to operate Hands-free compatible devices, refer to
the respective instruction manuals.
Hands-free
Switching to Hands-free
<>
Information
p While the Flat-plug Earphone/Microphone with Switch
(option) is connected, you cannot hear voice through the
speaker even if you switch to Hands-free.
p Keep the FOMA phone well away from your ear during a
Hands-free call. Otherwise you could affect or damage your
hearing.
p Talk into the FOMA phone within a distance of about 50 cm.
In-Car Hands-free
Using Hands-free Compatible
Devices
Information
p To connect using a cable (USB connection), set “USB mode
setting” to “Communication mode”.
p “ ” appears while you are talking or communicating using
a USB Hands-free compatible device.
<>
1
When you receive a call, the ring tone
sounds and the Call/Charging indicator
flickers.
p To vibrate the FOMA phone for
incoming calls, set “Phone” or
“Videophone” of “Vibrator” to
other than “OFF”.
p When receiving a videophone
call, “Incoming V.phone” is
displayed.
p “ ” is displayed at the
upper right of the phone number
for incoming international calls.
p “ ” might appear while the FOMA phone is connected to a
USB Hands-free compatible device, and “ ” while “USB
mode setting” is set to “microSD mode”, depending on the
Hands-free device connected.
p The display or ring tone for incoming calls follows the
settings of the FOMA phone.
p When the sound is set to output from a Hands-free
compatible device, the ring tone sounds from that device
even when Manner Mode is activated or “Ring volume” of
the FOMA phone is set to “Silent”.
p The receiving operation in Public Mode (Drive Mode) works
in accordance with the “Public (Drive) mode” setting.
p The receiving operation while Record Message is activated
works in accordance with the “Record message setting”
setting.
p When the sound is set to output from the FOMA phone, the
FOMA phone works in accordance with “Setting when
folded” if it is closed during a call. When the sound is set to
output from a Hands-free device, the communication state
does not change regardless of “Setting when folded” even if
you close the FOMA phone.
Receiving a Call/Videophone Call
Information
Chaku-moji message
(See page 55)