User's Manual

26 LKM-A121-BC / LKM-A121-BD
SWB Setting
SW1 Reserved OFF
SW2 Reserved OFF
SW3 Reserved OFF
SW4 Reserved OFF
SW5 Reserved OFF
SW6 Reserved OFF
SW7 Reserved OFF
SW8 Reserved OFF
12345678
SWB
ON
OFF
SWA Setting
SW1 Reserved OFF
SW2 Reserved OFF
SW3 Reserved OFF
SW4 Reserved OFF
SW5 Reserved OFF
SW6 Reserved OFF
SW7 DC Control-1 ON
SW8 DC Control-2 OFF
12345678
SWA
ON
OFF
Option Switches ( DIP Switch )
The dip switches locate on the bottom of this drive.
( Not operate these switches generally. )
Power Cord
Fibre Channel interface Cable
Connecting
After make sure that the system (Host PC) power switch is OFF, please connect
the S-AIT drive unit as follows.
1) Connect the Fibre Channel interface
cable to the drive unit.
2) Connect the other end of the Fibre
Channel interface cable to the system
(host PC) Fibre Channel connector.
3) Connect the power cord to the drive unit
and the outlet with earth, and turn the
drive unit power ON.
4) Turn the system (host PC) power ON.
S-AIT Drive Unit (Rear Side)