User's Manual

Connections
● LAN（PoE）connection
■ Connection to control terminal
● Cable processing
Before connection, prepare the cable as shown in the drawing at right.
Note:
• Stranded wire is highly recommended.
• Wire insulation must be removed.
• Do not use solder to tin the wire.
• The recommended maximum cable length is 15 m {49feet}.
● Connection of E2 CNT terminals
An external device is connected between E2 CNT and COM. These terminals are isolated from the internal circuit by a photo
coupler.
E2 CNT
E2 COM
E2 CNT