User's Manual

Useful InformationAnswering SystemTelephone System

Installation

For assistance, please call: 1-800-211-PANA(7262)

Preparation

Installing the Battery in the Handset

Insert the battery (1), and press it down until it snaps into the compartment (2).

Close the cover.

To replace the battery:

Press the notch on the cover firmly and slide it as

indicated by the arrow. Replace the old battery with a new

one (p. 14). Close the cover and charge the handset for

about 6 hours.

Battery Charge

Place the handset on the base unit for about 6 hours

before initial use.

• The unit beeps once, the CHARGE indicator lights and

“Charging” is displayed.

• When the battery is fully charged, “Charge

completed” is displayed if there are no new calls in the

Caller List.

Battery strength

You can confirm the battery

strength on the handset

display.

Battery strength is indicated

by the icons shown in the

chart to the right.

Display prompt Battery strength

1 Fully charged

2 Medium

3 Low

3 (flashing) Needs to be recharged.

4 Discharged

CHARGE Indicato