User Guide

Table Of Contents
Chapter 9 Page 227
To identify dynamic IP addressing:
Tap the IP Address check box to select it.
To enter a permanent IP address:
1. Tap the IP Address check box to deselect it and display a
permanent IP address field below the check box.
2. Tap the space to the left of the first period then enter the first
section of the IP address.
Note:
Each section must be a number from 0 to 255.
3. Tap and enter the remaining sections of the IP address.
4. Tap OK.
Creating a login script
A login script is a series of commands, similar to an autoexec.bat file,
that automates logging into your ISP. You can create login script files
by selecting commands from the Command pick list in the Login
Script dialog. Some commands from the Command pick list, such as
Send, require you to supply additional information. Those commands
have a parameter field so that you can add the necessary data.
Note:
You can also use non-ASCII and literal characters in your
login script. See Appendix C for more information.
To create a login script:
1. Tap Script.
2. Tap the End pick list.
Tap to select automatic
IP address