Handbook

Chapter 7 Page 171
Creating a login script
A login script is a series of commands, similar to an autoexec.bat file,
that automates logging into your ISP. You can create login script files
by selecting commands from the Command pick list in the Login
Script dialog. Some commands from the Command pick list, such as
Send, require you to supply additional information. Those commands
have a parameter field so that you can add the necessary data.
Note: You can also use non-ASCII and literal characters in your
login script. See Appendix D for more information.
To create a login script:
1. Tap Script.
2. Tap the End pick list.
3. Tap the command you want from the Command list. If the
command requires additional information, a field appears to the
right of it for you to enter the information. The following
commands are available:
Wait For
Tells your organizer to wait for specific
characters from the TCP/IP server before
executing the next command.
Send
Transmits specific characters to the TCP/
IP server to which you are connecting.
Send CR
Transmits a carriage return or LF character
to the TCP/IP server to which you are
connecting.
Tap here