Operation Manual

Chapter 17 Performing HotSync
®
Operations
308
Conducting network HotSync operations
When you use the network HotSync technology, you can take advantage of the
wireless LAN connectivity available in many environments. Network HotSync
technology enables you to perform a network HotSync operation using an 802.11b
radio.
Connecting to your computer through a wireless LAN
A network HotSync operation requires the following (consult your system
administrator for assistance):
■ Your computer has TCP/IP support installed.
■ Your computer is available on a broadband network, such as a company
network or DSL.
IMPORTANT
Dial-up modem connection is not supported.
To prepare your computer for a network HotSync operation:
1. Click the HotSync Manager icon in the Windows system tray.
2. From the HotSync Manager menu, verify that Network is selected. If Network
is selected, there is a checkmark next to it. If Network is not selected, click
Network to select it.
3. From the HotSync Manager menu, select Setup.
4. Click the Network tab and make sure your username has a checkmark next to
it. If the checkmark is not there, click the check box next to your username.