User Guide

222 Section 3F: Using Wireless Connections
䡲 Bluetooth: Toggles Bluetooth on and off. (Press Settings [right softkey] and select
Bluetooth to configure Bluetooth on your device.)
䡲 Wi-Fi: Turns Wi-Fi on and off. (If you are connected to a wireless network, you can
press Settings [right softkey] and select Wireless LAN to review your wireless
network settings, adjust how Wi-Fi uses power, etc. If both the ON and OFF buttons
are gray, Wi-Fi is off. You cannot turn Wi-Fi on with Comm Manager. You must use
the Wi-Fi button on the side of your Treo. See “Turning the Wi-Fi Feature On and Off”
on page 205.)
䡲 Microsoft Direct Push: Toggles between receiving Outlook email automatically via
Direct Push technology or manually when you initiate a sync (see “Setting the
Synchronization Schedule” on page 334).
䡲 Data Connection: Disconnects active data services (for example, EVDO and Direct
Push). (If both the ON and OFF buttons are gray, you are not connected to a data
service. You cannot connect to a data service in Comm Manager.)
3. Press Exit (left softkey).