Tiller User Manual

5
SAFETY SIGN LOCATIONS
ITEM QTY. PART # DESCRIPTION
1 1 50-0723 READ MANUAL
2 1 50-0724 HYDRAULIC
3 2 RDL3100 STAND CLEAR
4 1 RDL3178 NOT A STEP
INSTRUCTIONS
x Keep all safety signs clean and legible.
x Replace all missing, illegible, or damaged
safety signs.
x Replacement parts for parts with safety
signs attached must also have safety
signs attached.
x Safety signs are available, free of charge,
from your dealer or from FFC
Attachments.
PLACEMENT OR REPLACEMENT OF
SAFETY SIGNS
1. Clean the area of application with non-flammable
solvent, then wash the same area with soap and water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety sign, exposing
the adhesive surface.
4. Apply the safety sign to the position shown in the
diagram above and smooth out any bubbles.
ITEM 1
ITEM 2 ITEM 3 ITEM 4