Use and Care Manual

INSTRUCTION Manual D500SR - 11/29/2016
WARNING: When a flammable liquid is sprayed, there may
be danger of fire or explosion especially in a closed room:
keep compressor at least 20 feet away from areas where
hazardous concentrations of flammable vapors are likely to
occur. Disconnect power before servicing.
ATTENTION: Lorsqu'un liquide inflammable est pulverise,
il peut y avoir danger d'incendie ou d'explosion,
specialement dans une piece fermee; garder le
compresseur a au moins 20 pieds des endroits ou des
concentrations dangereuses de vapeurs inflammables
sont susceptibles de se produire. Debrancher avant toute
maintenance.
Manufactured in China for Paasche
D500SR Air Compressors
1/5 HP, 120 Volts, 60 Hz,
47 Dbs. Weight: 8.12 lbs (3.8 kg)
Features:
Portable & Lightweight
Low Noise Level
• Thermally Protected
Steady Air Flow
Regulator & Moisture Trap
Auto Stop and Start
1/4” NPT Fittings
Carrying Handles
Compressor Specs:
Single Cylinder Piston
1/5 HP
110-120 Volt / 60 HZ
0-35 Working Pressure
(Depending on Airbrush)
8.3 lbs (3.7kg)
Dim: 7.75”L x 5.5”W x 6.5”H
6 Foot Electric Cord
Operation Instructions:
1) Connect Air hose to male compressor fitting
2) Use Plumbers tape on threads to seal any air
leaks
3) Plug compressor into grounded outlet
4) Turn on compressor
5) The regulator gauge will show the working
pressure. Use adjustment knob on top of
moisture trap to set desired pressure.
6) Ensure the working area is well ventilated
7) Compressor will run when your airbrush is
being triggered
Paasche Airbrush Company
4311 North Normandy Avenue
Chicago, IL 60634-1395
Phone: 773-867-9191 Fax: 773-867-9198
Website: paascheairbrush.com
E-Mail: info@paascheairbrush.com
This compressor is both
ETL & CE Listed

Summary of content (2 pages)