Specification

ManualsBrandsOwens Corning ManualsBuilding materialsR-15 Pure Safety Unfaced Insulation Batt 15 in. x 93 in.

3-Part Speci cation

EcoTouch

Insulation

with PureFiber

Technolog y

SECTION 07 21 16

BATT INSULATION

PART 1— GENERAL

1.1 SUMMARY

A. Section Includes: Fiberglass batt insulation of the

following types:

1. EcoTouch

Unfaced Insulation

2. EcoTouch

Kraft-faced Insulation

3. EcoTouch

Foil-faced Insulation

4. EcoTouch

FSK-faced Insulation

5. EcoTouch

PSK-faced Insulation

1.2 SUBMITTALS

A. Product Data: Submit data on product

characteristics, performance criteria, and

limitations, including installation instructions.

B. Sustainable Design Submittals: Submit

manufacturer’s sustainable design certi cations as

speci ed.

1.3 QUALITY ASSURANCE

A. Sustainable Design: Provide products which have

received the following certi cations:

1. UL Environment EcoLogo CCD-106, applies to

EcoTouch

Faced and Unfaced Insulation.

2. GREENGUARD Indoor Air Quality and

GREENGUARD Children & Schools, applies

to EcoTouch

Unfaced Batts and EcoTouch

Faced Batts and Rolls.

3. GREENGUARD Formaldehyde Free, applies

to EcoTouch

Unfaced and EcoTouch

Faced

Batts and Rolls.

4. Scienti c Certi cation Systems SCS-

MC-01025, SCS Certi ed minimum 65%

recycled glass content (with at least 41% post-

consumer recycled and the balance of pre-

consumer recycled glass content), applies to

EcoTouch

Unfaced Batts and Rolls.

5. Scienti c Certi cation Systems SCS-

MC-02676, SCS Certi ed minimum 58%

recycled glass content (with at least 36%

post-consumer recycled and the balance of

pre-consumer recycled glass content), applies

to EcoTouch

Faced Batts and Rolls.

6. USDA Certi ed Biobased Products:

EcoTouch

Unfaced – 98 percent; EcoTouch

Kraft-faced – 57 percent; EcoTouch

FSK-faced

– 78 percent.

1.4 DELIVERY, STORAGE, AND HANDLING

A. Delivery: Deliver materials in manufacturer’s

original packaging.

B. Storage: Store and protect products in

accordance with manufacturer’s instructions.

Store inside and in a dry location. Protect

insulation materials from moisture and soiling.

C. Inspection: Arrange storage of products to permit

access for inspection. Periodically inspect to verify

products are undamaged and are maintained in

acceptable condition.

PART 2— PRODUCTS

2.1 MANUFACTURER

A. Thermal Insulation: EcoTouch

PINK

FIBERGLAS

™

Insulation with PureFiber

Technolog y by Owens-Cor ning.

2.2 MATERIALS

A. EcoTouch

Unfaced Batt Insulation: ASTM C665,

Type I, preformed formaldehyde free glass  ber

batt type, unfaced. Includes Unfaced SonoBatts

and Sound Attenuation Batts.

1. Noncombustible per ASTM E136.

2. Flamespread less than 25, smoke developed

less than 50 per ASTM E84.

3. ICC Building Code Construction Classi cation:

All types.

4. Water vapor sorption, Maximum by weight:

not more than 5 percent.

B. EcoTouch

Kraft Faced Batt Insulation: ASTM C

665, Type II, Class C preformed formaldehyde

free glass  ber batt type, Kraft paper faced

one side. Includes Kraft faced SonoBatts and

EcoTouch

ProPink FastBatt Insulation

1. ICC Building Code Construction Classi cation:

III, IV, V.

2. Perm Rating: 1 perm maximum per ASTM

E96.

C. EcoTouch

Foil Faced Batt Insulation: ASTM C

665, Type III, Class C preformed formaldehyde

free glass  ber batt type, foil faced one side.

1. Flamespread less than 75, smoke developed

less than 150 per ASTM E84.

Summary of content (4 pages)

PAGE 1
EcoTouch® Insulation with PureFiber® Technology 3-Part Specification SECTION 07 21 16 BATT INSULATION PART 1—GENERAL 1.1 SUMMARY A. Section Includes: Fiberglass batt insulation of the following types: 1. EcoTouch® Unfaced Insulation 2. EcoTouch® Kraft-faced Insulation 3. EcoTouch® Foil-faced Insulation 4. EcoTouch® FSK-faced Insulation 5. EcoTouch® PSK-faced Insulation 1.2 SUBMITTALS A.
PAGE 2
EcoTouch® Insulation with PureFiber® Technology 3-Part Specification 2. ICC Building Code Construction Classification: III, IV, V. 3. Perm Rating: 0.5 perm maximum per ASTM E96. D. EcoTouch® FS-25 Batt Insulation: ASTM C665, Type II (PSK facing), Class A and Type III (FSK facing), Class A preformed formaldehyde free glass fiber batt, poly/scrim/Kraft (PSK) or foil/ scrim/Kraft (FSK) faced on one side. 1. Flame spread less than 25, smoke developed index less than 50 per ASTM E84 2.
PAGE 3
EcoTouch® Insulation with PureFiber® Technology 3-Part Specification 6. R-21, 5-½ inch (139mm) thickness, 16 inch (406mm) or 24 inch (609mm) width, 96 inch (2438mm) length. PART 3—EXECUTION 3.1 EXAMINATION A. Examine substrates, penetrations, adjoining construction and the conditions under which work is to be installed. Verify that surfaces are dry and free of contaminants. B. Report unacceptable conditions in writing.
PAGE 4
EcoTouch® Insulation with PureFiber® Technology 3-Part Specification Disclaimer of Liability Technical information contained herein is furnished without charge or obligation and is given and accepted at recipient’s sole risk. Because conditions of use may vary and are beyond our control, Owens Corning makes no representation about, and is not responsible or liable for the accuracy or reliability of data associated with particular uses of any product described herein.