Specification

Product Data Sheet
SOLSERENE ACOUSTIC PANELS
APPLICATION
Solserene acoustic panels are designed for high trafc areas
requiring impact-resistant, tackable surfaces with excellent
acoustical absorption.
CONSTRUCTION
The core construction is a dimensionally stable 1” glass
berboard with resin hardened edge protection laminated
with a 1/8” molded glass ber. Finishes are completely
adhered to the face of the panel and returned to the back
for a full nished edge. All corners are fully tailored.
SIZE AVAILABILITY
Available sizes are 24” x 24”; 24” x 48”; 48” x 48” squares;
24” and 36” diameter circles; and 24” x 24” x 24” triangles.
EDGE DETAIL
All edges are resin hardened and square.
FINISH
Seven standard colors are available:
• Guilford of Maine
®
Anchorage Quarry Blue (blue)
• Guilford of Maine
®
Anchorage Red Delicious (red)
• Guilford of Maine
®
Anchorage Vanilla (tan)
• Guilford of Maine
®
Anchorage Graphite (black)
• Guilford of Maine
®
Anchorage Sunshine (yellow)
• Guilford of Maine
®
Anchorage Asteroid (grey)
• Paintable Scrim Finish
MOUNTING
For mounting, use Angled Impaling Clips with Anchors.
Disclaimer of Liability
Technical information contained herein is furnished without charge or obligation
and is given and accepted at recipient’s sole risk. Because conditions of use may
vary and are beyond our control, Owens Corning makes no representation about,
and is not responsible or liable for the accuracy or reliability of data associated with
particular uses of any products described herein. Nothing contained in this bulletin
shall be considered a recommendation.
ACOUSTICAL PERFORMANCE
Solserene acoustic panels provide excellent acoustical
performance for your space.
Thickness NRC
1-1/8” .90
FIRE PERFORMANCE
Each component has been tested according to ASTM
E-84* and has a Class I/A rating.
RECYCLED CONTENT
Solserene Series panels can utilize an Owens Corning
berglass board core that is third-party certied for
recycled content. The board is certied by SCS to
contain at least 57% recycled glass.
And for your LEED
®
project, our acoustical panels can
help you qualify for recycled content points under the
Materials and Resources section. Other LEED
®
categories
may also apply depending upon the project requirements.
ONE-YEAR WARRANTY
Solserene acoustic panels have a limited one-year warranty
starting from date of purchase. The panels are warranted
to be free from defects in material and workmanship. See
product warranty for limitations.
* The ASTM E 84 standard should be used to measure and describe the properties
of materials, products or assemblies in response to heat and ame under controlled
laboratory conditions and should not be used to describe or appraise the re hazard
or re risk of materials, products or assemblies under actual re conditions. However,
results of this test may be used as elements of a re risk assessment, which takes into,
account all of the factors, which are pertinent to an assessment of the re hazard of
a particular end use. Values are reported to the nearest 5 rating.
APPLICATION
High Impact Wall and Ceiling
panels are designed for high
traffic areas requiring impact-
resistant tackable surfaces with
excellent acoustical absorption.
Use in corridors, lobbies,
hallways and similar areas.
CONSTRUCTION
The core construction is a
dimensionally stable 6-7 PCF
glass fiberboard with resin
hardened edge protection
laminated with a 1/16” or 1/8”
16-20 pcf molded glass fiber.
Finishes are completely
adhered to the face of the
panel and returned to the back
for a full finished edge. All
corners are fully tailored.
SIZE AVAILABILITY
Available thicknesses are 1/2",
3/4", 1", 1-1/2", 2", 3", and 4"
thicknesses, plus either the
1/16” or 1/8” molded glass
fiberboard. Maximum sizes are
either 4’x12’ or 5’x10’. Custom
sizes are standard!
EDGE DETAIL
All edges are resin hardened,
unless otherwise specified.
Available choices include:
square, radius, bevel, and
radius corners.
FINISH
A wide variety of fabrics are
available from all major brands,
including Guilford, Maharam,
Knoll, Carnegie, and
Designtex. A comprehensive
selection of vinyl coverings is
available from Webcore,
Designtex and Maharam. A
USDA-approved Tedlar
encapsulation can be provided
for areas where sanitation and
clean-ability are mandatory.
MOUNTING
Standard mountings include spot
and perimeter adhesive, Z-clip,
concealed splines, impaling
clips, hook & loop, and magnetic
fasteners. Wall Bar to Wall Bar
is recommended for ceilings.
SUPERIOR ACOUSTICAL
PERFORMANCE
Respond High Impact Acoustical
Wall Panels provide excellent
acoustical performance for
auditoriums, theaters, offices,
libraries, classrooms and
virtually anywhere sound
absorption and impact
resistance is required. High
Impact panels carry the UL
classification label for your
assurance of acoustical
performance.
ACOUSTICAL UL LISTING
High Impact fabric wr
apped
panels have been tested at
Underwriters Laboratories for
their acoustical performance.
The following NRC listings are
available:
Thickness NRC
1-1/8” .85
2-1/8” .95
The noise reduction coefficients
were derived from tests
conducted by a UL certified
facility in accordance with ASTM
C 423 on a Type D5 mounting.
FIRE PERFORMANCE
Each component has been tested
according to ASTM E 84* and has
a Class
I/A rating.
RECYCLED CONTENT
High Impact panels utilize an
Owens Corning fiberglass board
core that is eligible to bear the
Green Cross label for recycled
content. The board is certified on
average to contain at least 35%
recycled glass, with 9% post-
consumer and 26% pre-consumer
content.
And for your LEED project, our
acoustical panels can help you
qualify for recycled content points
under the Materials and
Resources section. Other LEED
categories may also apply
depending upon the project
requirements.
3-Year
3-Year Walls / 1 Year Ceilings
Respond High Impact Acoustical
Panels have a limited 3-year
warranty when used on walls, and
1-year on ceilings; starting from
date of purchase. The panels are
warranted to be free from defects
in material and workmanship.
See product warranty for
limitations.
* The ASTM E 84 standard should be used to
measure and describe the properties of materials,
products or assemblies in response to heat and
flame under controlled laboratory conditions and
should not be used to describe or appraise the fire
hazard or fire risk of materials, products or
assemblies unde
r actual fire conditions. However,
results of this test may be used as elements of a
fire risk assessment, which takes into, account all of
the factors, which are pertinent to an assessment of
the fire hazard of a particular end use. Values are
reported to the nearest 5 rating.
June 14, 2005
High Impact
elsAcoustical Pan
CERTIFIED
SCIENTIFIC
CERTIFICATION
SYSTEMS
Noise
Reduction
Coefficient
Respond
®
SUBMITTAL SHEET
August 21, 2006
High Impact
Acoustical Panels
(
Act-Tack
)
CDC CORPORATION
800 Gustafson Road
Ladysmith, Wisconsin 54848
1-800-932-2383
www.occommercial.com
© 2014 Owens Corning. All Rights Reserved.
LEED is a registered trademark of U.S. Green Building Council.