Installation & Assembly

24. Push Roof Ridge Beam down into support pocket, making sure beam does not extend higher
than gable framing. Attach with two Simpson Strong Ties using 4 - 1 1/4” screws per side.
C. Porch Section
25. Locate all Corner Filler Trims. Filler Trims will be positioned in each corner. Filler Trims are
2 1/2” wide x 15/16” thick except for the Right Front Corner, which will be 4 11/16” wide x 11/16” Thick.
Attach each with 6 - finishing nails.
4 11/16” wide
Filler Trim
2 1/2” wide
Filler Trim
Right Front
Corner
4 11/16”
26. Attach Rear Corner Filler Trims (both are 2 1/2” wide x 15/16” thick) using 6 finishing nails per
piece. Locate Front Corner Wide Trim (4 11/16” wide x 56 3/4”) and Door Stop Trim.
2 1/2”
Rear Filler Trim
Front Corner
Wide Trim
(4 11/16” wide x
56 3/4”)
Door Stop Trim
(2 1/2” wide)
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 12
59” long