Commercial Burner Supplement Manual

16
www.outdoorrooms.com
42511 REV B : 03-16-2021
INSTALLATION INSTRUCTIONS
3
Ensure enclosure meets requirements
detailed in Crystal Fire Plus installation
manual.
Position and if necessary secure burner
plate to enclosure.
Install top material or capstone.
Burner insert can then be connected to
gas and electrical according to the Crystal
Fire Plus instruction manual and lowered
into the burner plate. Ignition wind guard
should be oriented towards cutout in
burner plate.
For BI28 burners, it is necessary to secure
burner insert to burner plate. Remove the
four (4) 1/4”-20 x 3/4” machine screws
from burner plate threaded inserts and
secure BI28 to burner plate through
perimeter drainage holes.
1.
2.
3.
4.
5.
4
2
Ignition Wind Guard
5