Instructions / Assembly

4x4 RAISED GARDEN BED KIT
INSTALLATION INSTRUCTIONS
KIT CONTENTS MATERIALS NEEDED
STEP 1
STEP 2
(4) Preassembled sides
(8) Phillips head screws
- Cordless drill with Phillips bit
- 8.5 cubic feet of soil to fill the planter
- Work gloves
- If planting consumables, an impermeable liner (sold
separately) is required. Punch holes in bottom for draining.
*
*
©2020 UFP Retail Solutions, LLC. Outdoor Essentials is a registered trademark of UFP Industries, Inc.
All rights reserved. 2801 E. Beltline NE, Grand Rapids, MI 49525 11148_12/20
OutdoorEssentialProducts.com
THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION
OR USE OF THE PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH
THE CONSTRUCTION OR USE OF THIS PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE
PROJECT, INCLUDING, BUT NOT LIMITED TO, WEARING THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES
NOT PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.
Place two sides together to make a corner
(metal plates facing inward).
Drive screws through the corner as shown to
attach sides.
Repeat with remaining sides to complete
the bed.
ASSEMBLY INSTRUCTIONS

Summary of content (2 pages)