Instructions / Assembly
PLEASE READ INSTRUCTIONS COMPLETELY BEFORE YOU BEGIN: Follow these instructions
to install panels within warranty and to avoid product damage.
We recommend following best building
practices for installing OUTDECO USA panels and posts in accordance with their intended purpose.
authorities about building codes/standards that may apply to your project.
OUTDECO Steel Panels & Posts have a 5-Year Limited Warranty for material integrity when installed per
Illustrations not to scale.
Black steel rendered in gray.
Suitable for pro
builders and DIY
crafters. Installation
requires 2 people.
Decorative Steel Panels
& Wall Extension Posts
INSTALLATION INSTRUCTIONS
18" Wall
Extension Post
See all Metal Panels at:
IMPORTANT! Install 18" Posts on: 1) tops of walls or fences with a minimum 5"w at cap; 2) solid wall or fence structure in
good condition, with no loose bricks, blocks, or planks.
Fig. 2
PANEL
BACK VIEW
1.
Set Posts and Install Panels
■
with posts' un-drilled sides facing front
(Fig. 1)
.
** on top of Posts.
■
(Fig. 2)
.
■
On back side of panel: Use impact driver to loosely drive Panel Screws*
(Fig. 2)
. Do not tighten screws yet.
2.
Install Posts on Wall
■
■
Pre-drill top of wall with ⁵⁄₁₆
Place assembly on wall again
and level Posts and Panel.
■
Bolt down Posts with Post Screws**
(Fig. 3)
■
Adjust Panel vertically until level and hand-
tighten screws securely. Do not overtighten.
3.
Install Additional Sections
■
Step 1, using one Post only
(Fig. 4)
.
■
Step 2, attaching Panel to
previously installed Post
(Fig. 5)
.
4.
Finish Fencing
■
** into unused post
(Fig. 6)
.
Product Details
■
OUTDECO Steel Panels are engineered to install directly on OUTDECO
18" Wall Extension Posts and 16" Fence Extension Posts (see back).
■
Slots in panel sides align with pre-drilled holes on posts and allow
■
Panels can be mounted on timber posts or hung on walls/fences.
WHAT YOU'LL NEED
Negative Carbon
Footprint Mill
Negative Carbon
Emissions
Temperature, UV &
Weather Resistant
Chemical
Adhesives
Panel Border
Drill Guide
Panel Border
Drill Guide
Drill Guide
10-Year Material
Warranty
100% CMYK BLACK
(recommend
magnetic type)
Drill
w/ ⁵⁄₁₆" Bit
w
/
Phillips Bit
Negative Carbon
Footprint Mill
Negative Carbon
Emissions
Temperature, UV &
Weather Resistant
Chemical
Adhesives
Panel Border
Drill Guide
Panel Border
Drill Guide
Drill Guide
10-Year Material
Warranty
100% CMYK BLACK
(2)
Negative Carbon
Footprint Mill
Negative Carbon
Emissions
Temperature, UV &
Weather Resistant
Chemical
Adhesives
Panel Border
Drill Guide
Panel Border
Drill Guide
Drill Guide
10-Year Material
Warranty
100% CMYK BLACK
Gloves
Installing Panels on 18" Wall Extension Posts
Fig. 3
Fig. 6
*
Included with Panel
**
Included with Post
Fig. 4
PANEL BACK VIEW
Fig. 5
Previously
Installed
Panel.
PANEL
BACK VIEW
WHAT'S IN THE BOX
WARNING:
Wear gloves – panel edges can be sharp.
PANELS
1
48" x 16" or 72" x 16" Decorative Steel Panel
4
Panel Screws –
POSTS
1 18" Post –
4
Masonry Post Bolts
se ⁵⁄₁₆" drill bit
1
Post Cap –
2
Post Hole Plugs –
Panels and Posts
sold separately.
Approx. Panel Width
48" or 72"
Fig. 1
Front of Fence:
No drill holes.
If mounted to top of
fence cap, use wood
screws sized for the
depth of the fence cap.
(not included)
outdecousa .com