Use and Care Manual

Assembly Instructions - Important:

Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when

assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or

information on other products, please visit our website: www.ofcestar.net or call or write us.

ABB26

26” SPINDLE COUNTER STOOL

March, 2022

PAGE 1
March, 2022 ABB26 26” SPINDLE COUNTER STOOL Assembly Instructions - Important: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or information on other products, please visit our website: www.officestar.net or call or write us.
PAGE 2
1. Do not use this product unless all screws and bolts are securely tightened. 2. Check that all screws and bolts are tight every three months or as needed. 3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation. 4. Do not use this product as a stepladder. 5. Use this product for its intended purpose only. 6. FOR INDOOR RESIDENTIAL USE ONLY.
PAGE 3
PARTS (1) Backrest (1 PC) (2) Seat (1 PC) (3) Front Leg (2 PCS) (4) Left Stretcher (1 PC) (5) Right Stretcher (1 PC) (6) Front Stretcher (1 PC) HARDWARE LIST NO DRAWING DESCRIPTION SIZE QUANTITY A Bolt Ø5/16” x 3-1/2” 4 PCS B Bolt Ø5/16” x 2-1/4” 5 PCS + 1 Extra C Flat Washer Ø5/16” x 22mm 9 PCS + 1 Extra D Lock Washer Ø5/16” 9 PCS + 1 Extra E Screw M4.
PAGE 4
STEP 1 DO NOT FULLY TIGHTEN BOLTS STEP 2 DO NOT FULLY TIGHTEN SCREWS
PAGE 5
STEP 3 DO NOT FULLY TIGHTEN SCREWS STEP 4 TURN STOOL TO THE UPRIGHT POSITION. APPLY FIRM PRESSURE TO ALIGN & FULLY TIGHTEN ALL SCREWS & BOLTS.