User Manual

499
PNEUMATIC TASK CHAIR
OPERATING INSTRUCTIONS
1
499
CHAISE DE TRAVAIL PNEUMATIQUE
INSTRUCTIONS DE MONTAGE
© Office Star Products mai 2018
GENERAL CHAIR WARRANTY
Office Star General chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 2 Years on all non-moving metal parts.
• 1 Year on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 1 Year on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 200 lbs. or less. This warranty will not cover labor,
freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The
user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Dispose of packing material properly. Do not use plastic
cover as head covering. It may cause suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.
PART QTY
1. Base ..............................1
2. Roulette ............................5
3. Vérin pneumatique ...................1
4. Soufflet ............................1
5. Plaque du siège et support .............1
6. Coussin du siège .....................1
7. Coussin du dossier ...................1
8. Vis du dossier .......................3
9. Vis du plaque du siège ................4
10. Vis du levier ........................4
11. Levier .............................1
12. Plaque de levier .....................1
1
2
5
6
7
8
9
11
10
12
FEATURE
• HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1). To
lower seat height sit on chair and lift lever(1).
NOTE: It is normal for chair to slighly lower under body weight.
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier que les quantités des pièces reçues
sont correctes.
ÉTAPE 1 Insérer cinq roulettes (2) dans la base (1), les pousser très fort jusqu’à ce que vous entendiez ou sentiez la roulette (2) s’enclencher. Insérer le vérin
pneumatique (3) dans la Base (1), et glisser le soufflet (4) sur le vérin pneumatique (3).
ÉTAPE 2 Fixer le levier (11) à la plaque de siège et support (5) à l’aide de quatre vis du levier (10).
RESSERRER COMPLÈTEMENT TOUTES LES VIS DU LEVIER (10).
ÉTAPE 3 Fixer la plaque de siège et support (5) au coussin du siège (6) avec les vis du plaque du siège (9).
RESSERRER COMPLÈTEMENT TOUTES LES VIS DU PLAQUE DU SIÈGE (9).
ÉTAPE 4 Fixer le coussin du dossier (7) au plaque de siège et support (5) avec les vis du dossier (8).
RESSERRER COMPLÈTEMENT TOUTES LES VIS DU DOSSIER (8).
ÉTAPE 5 Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
ATTENTION: AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.
3
4