User Guide

Azimuth adjustment
In order to attain maximum channel separation,
it may be possible to adjust the azimuth. Should
the cartridge not be perfectly perpendicular to the
record’s surface, the tonearm or headshell may
require to be tilted a few degrees.
Correct azimuth is established by observing the
reflected image of the 2 parallel cartridge front
lines. The cartridge’s front lines must form a
straight line with the reflected lines. A flat mirror
may also be used to facilitate this process.
Terminal connections
Please correlate the colour code for the terminals on the drawing with the colour
coding on the cartridge.
The terminals for right and left channel have the same position as normal for Ortofon
cartridges. We recommend the enclosed LW-800S leadwires to be mounted on the
cartridge and tonearm before aligning and calibrating the cartridge. The length of
the enclosed lead wires will fit a distance between cartridge and tonearm terminals
of 35 mm, which will work with most headshells.
Mirror
White L +Red R+
Blue LGGreen RG
14 15