Wireless Thermo-Hygro Clock Model : RMR613HGA User Manual RMR613HGA lab test cover R2 1 1/8/04, 7:02 PM
Temperature and Humidity .................................... 10 Contents ................................................................... 1 Select Temperature Unit ...................................... 10 Introduction .............................................................. 2 Select Sensor Channel ........................................ 10 About Oregon Scientific .......................................... 2 Minimum / Maximum Records ............................. 11 Product Overview ......
EN INTRODUCTION ABOUT OREGON SCIENTIFIC Thank you for selecting the Oregon ScientificTM Wireless Thermo-Hygro Clock (RMR613HGA). This device bundles precise time keeping, dual alarm, and temperature and humidity monitoring features into a single tool you can use from the convenience of your home. Visit our website (www.oregonscientific.com) to learn more about other Oregon Scientific products such as digital cameras, hand-held organizers, health and fitness gear, and projection clocks.
EN PRODUCT OVERVIEW FRONT VIEW 1 1. Clock / Alarm Area: Date, time, dual alarm; and Atomic Clock reception status 2. Temperature Area: Readings; sensor channel number; remote unit reception and battery status 3. Humidity / Comfort Zone Area: Readings, comfort zone and battery status. 4. Channel button: switch remote sensor 5.
EN BACK VIEW 1 1. MEM: view current, maximum, and minimum temperature / humidity readings 2. DOWN: decrease setting / deactivate radiocontrolled clock / activate or deactivate alarm 3. UP: increase setting / activate radio-controlled clock / activate or deactivate alarm 4. MODE: change display / settings 3 5. Battery compartment 4 6. °C / °F switch 7.
EN REMOTE SENSOR (THGR122NX) 1 1 2 2 3 4 1. LCD display 1. 2. LED Status indicator 2. Wall mount hole RESET 3. Channel number (1 - 3) 4.
EN CHANGE SETTINGS GETTING STARTED 1. BATTERIES Batteries are not supplied with this product. You will need to purchase 2 x UM-3 (AA) 1.5V alkaline batteries for the main unit, and 2 x UM-4 (AAA) 1.5V alkaline batteries for the remote sensor. 2. 3. Press and hold MODE for 2 seconds to enter setting mode. Press UP or DOWN to change settings. Press MODE to confirm. REMOTE SENSOR (THGR122NX) Insert the batteries before first use, matching the polarity as shown in the battery compartment.
Insert the batteries, matching the polarity as shown in the battery compartment. 2. Set the channel. The switch is located in the battery compartment. SWITCH OPTION Channel Channel 1 - 3. If you are using more than one sensor, select a different channel for each sensor. 3. For best results: • Insert the batteries and select the channel and temperature unit before you mount the sensor. • Place the sensor out of direct sunlight and moisture.
EN ICON --- shows in Temp / Humidity Areas DESCRIPTION CLOCK Main unit is searching for sensors. At least 1 channel has been found. Channel 1 is selected (number will change depending on the sensor you select) The selected sensor cannot be found. Search for the sensor or check batteries. This product can track the date and time for up to 2 locations (Clock with Offset Hour). The US Atomic Clock in Boulder, Colorado automatically updates this information unless you disable the feature.
SWITCH CLOCK DISPLAY Perform this step if you cannot receive Atomic Clock signals. Press and hold DOWN for 2 seconds. Then, manually set the clock following the “Set Clock” instructions (below). Press MODE to toggle between Clock with Seconds, Clock with Weekday and Calendar, and Clock with Offset Hour display. The signal icon indicates that the Atomic Clock feature is ON. No icon means that it is OFF ALARMS This product has 2 alarms: a Single Alarm and a Weekday Alarm.
EN ACTIVATE ALARM TEMPERATURE AND HUMIDITY Press ALARM to switch to Weekday or Single Alarm view. To activate or deactivate the alarm, press UP or DOWN. This product can display the following information from the remote sensors: VIEW BAROMETER AREA • Current, minimum, and maximum temperatures and relative humidity percentages. • Alarm deactivated: --:-• Alarm activated: Alarm time is shown The bell icons mode selected.
EN ZONE Kineticwave Icon Designated Display Indoor Display Remote Remote Remote Display Display Display Channel 1 Channel 2 Channel 3 TEMPERATURE HUMIDITY Any >70% 20 – 25 ° C (68 - 77 ° F) 40 – 70% Any <40% This information is shown in the Humidity Area when the current measurement is displayed. To auto-scan between sensors, press and hold CHANNEL for 2 seconds. Each sensor's data will be displayed for 3 seconds. To end auto-scan, press CHANNEL or MEM.
EN Clean the product with a slightly damp cloth and alcoholfree mild detergent. Avoid dropping the product or placing it in a high-traffic location. Do not make any changes or modifications to this product. Unauthorized changes may void your right to use the product. The technical specification of this product and contents of this user guide are subject to change without notice. Images not drawn to scale. WARNINGS TROUBLESHOOTING This product is designed to give you years of service if handled properly.
Problem Symptom Remedy Remote sensor Cannot locate remote sensor Cannot change channel Check batteries ( Data does not match main unit Check location ( Initiate a manual sensor search ( 8) °C or °F Indoor Range -5 °C to 50 °C (23 °F to 122 °F) Outdoor Range -20 °C to 60 °C (-4 °F to 140 °F) Resolution 0.1 °C (0.2 °F) 6) Check sensors.
EN Calendar MM/DD; weekday in 5 languages (E, D, F, I, S) Alarm Weekday and Single Alarm; 2- minute crescendo NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The information below is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientific.com, or on the warranty card for this product) for all inquiries instead. 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. We Name: Oregon Scientific, Inc. Address: 19861 SW 95th Place, Tualatin, Oregon 97062 USA Telephone No.
© 2004 Oregon Scientific. All rights reserved. P/N.
