Operation Manual

12
EN
4. Press CH to store. Repeat the whole process to store
another channel.
To change the volume level, press
.
To listen to a stored channel, press CH.
Prolonged use of the FM Radio will significantly
reduce battery life.
TALK FUNCTION (AVAILABLE IN PE829 /
PE829A ONLY)
The talk function is available for DAILY / TARGET / TIMER
/ MEMORY and CLOCK modes. It will broadcast
information related to the current LCD screen, for example
on Daily Mode you will hear: “Today, you have walked
XXXXX steps, XX.XX kilometers/miles and burned
XXXX.X calories.
Broadcasts can be announced automatically at pre-
defined intervals (as detailed in the setting sequence
below), or manually by pressing TALK.
appears when the talk function is broadcasting.
To set up the talk function:
1. Press and hold TALK to enter setting mode.
2. Press
/ to change a setting and press TALK to
confirm and move on to the next one.
3. The setting sequence is:
• Auto-talk ON / OFF. If ON is selected you will need to
set the broadcast interval time to 5, 10 or 15 mins.
appears on the screen when this function is activated.
• Pacer ON / OFF. If ON is selected you will need to set
the pacer frequency which ranges from 45 to 180
beeps per minute. This function helps you maintain
the pace of your walk / run, as each beep represents
one step.
• Languages available – English, French and Spanish
OR English, Italian and German.
The radio function will be paused when the auto-talk
broadcast is happening or when you press TALK.
BACKLIGHT / LED LIGHT / KEYPAD LOCK /
RESET
To turn the backlight ON for 3 seconds, press .
To turn the LED light ON, press
. When you release the
button the light will turn OFF (PE828 only).
To turn the keypad lock ON / OFF, press and hold
.
To reset the unit, remove and then re-insert the batteries.
BATTERIES
appears when the battery is low and needs replacing.
Protect the environment by taking exhausted
batteries to authorized disposal stations.
PE82X_M_EN_V8.p65 2005.9.2, 10:53 AM12